Skip to contentSkip to conversation

reporting portability bugs (fwd)

Linux-ia64 Scott Rhine 1 participant 1 message Apr 12, 2001

lore
Share & tools
lore
#0 lore raw
Quoted 6 lines
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines · Scott Rhine

Scott> How do I report low level scsi drivers (like aha1542 & eata Scott> isa) that won't build for ia64?

Quoted 6 lines

In general, you could report them to [email protected].

However, IIRC, both aha1542 and eata are ISA bus drivers. DIG64 does not support ISA and we'll never support those drivers on IA-64.

	--david

we should ifdef the config so that these illegal options cannot be selected for ia64.

Network device support is also a minefield.
The hp ethernet driver HP 10/100VG PCLAN

	Western Digital WD80
	scsi driver AHA152X/2825

all build but cause load failure. These should be disallowed as well. I would have mailed the changes, but a more methodical testing needed to be done to find all the guilty parties. Some sort of grep for isa would probably do the trick for the first pass.

drivers/net/net.o: In function `hp100_start_xmit':
drivers/net/net.o(.text+0x18fe2): undefined reference to isa_memcpy_toio' drivers/net/net.o(.text+0x19011): undefined reference to isa_memset_io' drivers/net/net.o: In function `hp100_rx':
drivers/net/net.o(.text+0x196b2): undefined reference to isa_readl' drivers/net/net.o(.text+0x198d1): undefined reference to isa_memcpy_fromio' drivers/net/net.o: In function `wd_get_8390_hdr':
drivers/net/net.o(.text+0x1df62): undefined reference to isa_readl' drivers/net/net.o: In function wd_block_input':
drivers/net/net.o(.text+0x1e022): undefined reference to isa_memcpy_fromio' drivers/net/net.o(.text+0x1e052): undefined reference to isa_memcpy_fromio' drivers/net/net.o(.text+0x1e072): undefined reference to isa_eth_io_copy_and_sum' drivers/net/net.o: In function wd_block_output':
drivers/net/net.o(.text+0x1e232): undefined reference to isa_memcpy_toio' drivers/net/net.o(.text+0x1e282): undefined reference to isa_memcpy_toio'
ld: final link failed: Bad value

------------
Lastly, the default .config file that comes on the ftp site allows simulator code only and I have a live box. When will this change?