Skip to contentSkip to conversation

translating ACPI _HID & _UID to PCI bus number

Acpi [email protected] 2 participants 3 messages May 3, 2001

lore
Share & tools
lore
#0 lore raw

Matt,

maybe I am missing the exact point of your problem but that's the idea of how PCI devices should be represented in DSDT:

each a device if it's PCI one MUST have _ADR, which represents dev/fun number (no bus#). bus# can be declared by _BBN if it's not implicitly clear. The _BBN is surplus information unless you are dealing with peer bus architecture. Otherwise bus# can be figured from PCI hierarchy. You ain't need no _HID except host bridge, that's where hierarchy starts and that's what must be defined AND THAT'S ONLY THE CASE when _HID can be defined for a PCI device. _HID for the host (or hosts in case of peer bus architecture) is "PNP0A03". _UID is needed only if there are several devices with the same _HID, serial ports COM A and B, for instance, to distinguish them or PEER BUS architecture again. Though, you don't need to define PCI device at all unless:
1. It's host bridge (the case when the _HID must be provided)
2. You need to access to it's configuration space (so need to tell what dev/fun it is, bus will be figured from PCI hierarchy or _BBN if that is not implicitly clear)
3. you need to refer device in an object (_PRW for instance)

glad if it helps
Vit

-----Original Message-----
From: [email protected] [mailto:[email protected]]On Behalf Of Lee, Jung-Ik
Sent: Wednesday, May 02, 2001 5:02 PM
To: Nakajima, Jun; '[email protected]'; [email protected]
Cc: [email protected]
Subject: [Acpi] RE: [Linux-ia64] translating ACPI _HID & _UID to PCI bus number

Even with ACPI namespace, {_HID, _UID} pair does not tell the path of a device in a given topology, and can not produce a PCI bus number(vice versa).
_ADR of PCI device does not provide bus number either. It's just dev +func.

So to get PCI bus number of a given PCI bus:
1. you can use _BBN of the device, but this works only on root pci bridges. I personally want to see all PCI bridges have _BBN method for OSPM's convenience, but ACPI spec does not require it for non-roots.
2. you can enumerate pci bus from root pci bridges, following PCI std df enum scheme, and access pci config space of pci bridges to get BIOS set bus numbers. (But note that bus numbers set by BIOS do not necessarily match to what OSes assign. For reasons OSes can assign bus numbers different from BIOS's. So, PCI numbers from pci config space at EFI boot manager time, it's not always the same as OSes enumerates) Afaik, linux does not alter bus numbers set by BIOS yet, but someday...)

Thus, there seems to be no perfect solutions here... to get pci bus number from acpi name space alone.

J.I.

-----Original Message-----
From: Nakajima, Jun [mailto:[email protected]]
Sent: Wednesday, May 02, 2001 1:26 PM
To: '[email protected]'; [email protected]
Cc: [email protected]
Subject: RE: [Linux-ia64] translating ACPI _HID & _UID to PCI bus number

Not all PCI devices appear in the ACPI namespace. If a PCI device shows up in the ACPI namespace, it should have _ADR, which basically is its PCI bus, device, and function number. Then you can tell the _HID and _UID associated with that device. Hope this helps.

Jun

-----Original Message-----
From: [email protected] [mailto:[email protected]]
Sent: Wednesday, May 02, 2001 12:34 PM
To: [email protected]
Cc: [email protected]
Subject: [Linux-ia64] translating ACPI _HID & _UID to PCI bus number

I'm working on a user-space application to add a Linux entry to the IA-64 EFI Boot Manager. One component of this entry is the ACPI _HID and _UID fields, which correspond to a PCI bus number (in Linux kernel terms). I know the PCI bus number, device, and function, for a given controller. What I don't have is the ACPI _HID and _UID fields that match the PCI bus number. Any thoughts on how I can get them?

Thanks,
Matt

--
Matt Domsch
Sr. Software Engineer
Dell Linux Systems Group
Linux OS Development
www.dell.com/linux

_______________________________________________
Linux-IA64 mailing list
[email protected]
http://lists.linuxia64.org/lists/listinfo/linux-ia64

_______________________________________________
acpi maillist - [email protected]
http://phobos.fs.tum.de/mailman/listinfo/acpi

#1 lore raw

RE: [Acpi] RE: [Linux-ia64] translating ACPI _HID & _UID to PCI b

Quoted 7 lines

_HID for the host (or hosts in case of peer bus architecture) is
"PNP0A03". _UID is needed only if there are several devices with the same
_HID, serial ports COM A and B, for instance, to distinguish them or PEER
BUS architecture again.

Ahh, of course, _HID = EISAID("PNP0A03") = a0341d0. That helps. Now for the _UID...

-Matt

#2 lore raw
In reply to [email protected]

_UID is no matter, whatever numbers you like. The _HID, _UID pair should make your device unique if you have to assign same _HID for several of them. You may omit _UID at all if there is only one _HID of it's kind in the DSDT.

Cheers

-Vit

-----Original Message-----
From: [email protected] [mailto:[email protected]]
Sent: Thursday, May 03, 2001 12:27 AM
To: [email protected]; [email protected]; [email protected]; [email protected]
Cc: [email protected]
Subject: RE: [Acpi] RE: [Linux-ia64] translating ACPI _HID & _UID to PCI bus number

Quoted 7 lines

_HID for the host (or hosts in case of peer bus architecture) is
"PNP0A03". _UID is needed only if there are several devices with the same
_HID, serial ports COM A and B, for instance, to distinguish them or PEER
BUS architecture again.

Ahh, of course, _HID = EISAID("PNP0A03") = a0341d0. That helps. Now for the _UID...

-Matt