Skip to contentSkip to conversation

Issue with using execlp() from a 32 bit binary on IA64

Linux-ia64 David Mosberger 1 participant 1 message Sep 13, 2001

lore
Share & tools
lore
#0 lore raw
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line · Venkatesh Ramamurthy

Venkatesh> Hi, The RAID group has a problem with using execlp Venkatesh> function from a 32bit binary. The problem goes like this Venkatesh> , a test program "TestCtrl"(A) and "TestServ"(B) are the Venkatesh> two binaries. Initially both 'A' and 'B' are 32 bit Venkatesh> binaries. 'A' loads 'B' using execlp. 'A' loads during Venkatesh> system startup. The system boots to text mode. When i do Venkatesh> a 'startx', the X-window system hangs up. The last thing Venkatesh> i see is 'RAGE 128 .....' and hangs.

Sounds like you're using an old kernel. There was a problem with ar.k0 getting corrupted by the ia32 subsystem. I fixed that around 2.4.8 or thereabouts. The original mail reporting the problem and a fix is attached below. You might want to upgrade to 2.4.9 though.

	--david

-------------------------------------------------------------------
From: David Mosberger <[email protected]>
Sender: [email protected]
To: [email protected]
Subject: [Linux-ia64] fix for user-level i/o-base corruption
Date: Tue, 31 Jul 2001 11:25:19 -0700
Reply-To: [email protected]
X-URL: http://www.hpl.hp.com/personal/David_Mosberger/

I found that the I/O base in ar.k0 was wrong on my systems. This turns out to be due to a bug in the ia32 subsystem: it fails to reset the original i/o-base address when execve'ing an IA-64 program. The patch below fixes this.

I wonder whether this bug may be the root of the crashes that occasionally occur when switching from XFree86 to a virtual consoles.

	--david
arch/ia64/ia32/sys_ia32.c +4 -3
@@ -124,14 +124,16 @@
 	old_map_base  = current->thread.map_base;
 	old_task_size = current->thread.task_size;
 
-	/* we may be exec'ing a 64-bit process: reset map base & task-size: */
+	/* we may be exec'ing a 64-bit process: reset map base, task-size, and io-base: */
 	current->thread.map_base  = DEFAULT_MAP_BASE;
 	current->thread.task_size = DEFAULT_TASK_SIZE;
+	ia64_set_kr(IA64_KR_IO_BASE, current->thread.old_iob);
 
 	set_fs(KERNEL_DS);
 	r = sys_execve(filename, av, ae, regs);
 	if (r < 0) {
-		/* oops, execve failed, switch back to old map base & task-size: */
+		/* oops, execve failed, switch back to old values... */
+		ia64_set_kr(IA64_KR_IO_BASE, IA32_IOBASE);
 		current->thread.map_base  = old_map_base;
 		current->thread.task_size = old_task_size;
 		set_fs(USER_DS);	/* establish new task-size as the address-limit */
@@ -2612,7 +2614,6 @@
 	up_write(&current->mm->mmap_sem);
 
 	if (addr >= 0) {
-		ia64_set_kr(IA64_KR_IO_BASE, addr);
 		old = (old & ~0x3000) | (level << 12);
 		__asm__ __volatile__("mov ar.eflag=%0 ;;" :: "r"(old));
 	}

_______________________________________________
Linux-IA64 mailing list
[email protected]
http://lists.linuxia64.org/lists/listinfo/linux-ia64