adding new network device driver
I have written a driver for a netwok deive. I want to add it in the kernel. I have compiled the code with 2.4.0 patched with the latest patch. The new kernel (my_kernel) contains my driver symbols.
When I boot with new kernel my driver probe routine is not entered. Is there anyplace I need to inform the kernel about the existence of the new driver.
THis is on ia64 on RH7.1 and whole thing is on Lion.
Thanks
Guru
Quoted 3 lines
When I boot with new kernel my driver probe routine is not entered. Is there anyplace I need to inform the kernel about the existence of the new driver.
If it's a module, you simply mark your init function with __init, like so:
int __init my_driver_init(void)
{
...
}And then if it can be built as a module, putmodule_init(my_driver_init);
at the end. See most of the networking drivers for how they do this.
Then, at kernel build time, if your driver is built into the kernel (CONFIG_XXXX=Y), it gets its initialization routine called during the kernel startup. If it's a module, it gets called when you insmod your driver.
Of course, all of this isn't specific to IA-64, so this probably isn't the right list.
Thanks,
Matt
Signature · 6 lines
Matt Domsch Sr. Software Engineer Dell Linux Solutions www.dell.com/linux #2 Linux Server provider with 17% in the US and 14% Worldwide (IDC)! #3 Unix provider with 18% in the US (Dataquest)!
Quoted 3 lines · Gururaj Ananthateerta
When I boot with new kernel my driver probe routine is not entered. Is there anyplace I need to inform the kernel about the existence of the new driver.
linux/Documentation/DocBook/kernel-hacking.tmpl, __initcall and friends.
Updated Space.c and compiled the kernel.
The proble is called and my device is identified and configured. But there is some problem.
There are 2 ethernet devices (including mine) 1 is Intel EEpro100 and mine (gigabit controller). When the kernel boots it recognizes my NIC and EEpro100 NIC and hangs. I am unable to figure out whats going on. There is some confusions with ehto and eth1 that I am unable to follow.
Quoted 9 lines
Quoted 3 lines · Gururaj Ananthateerta
When I boot with new kernel my driver probe routine is not entered. Is there anyplace I need to inform the kernel about the existence of the new driver.
linux/Documentation/DocBook/kernel-hacking.tmpl,
__initcalland friends.