Skip to contentSkip to conversation

Poweroff

Linux-ia64 Jacqueline Lemaitre 3 participants 4 messages Feb 21, 2002 – Feb 22, 2002

lore
Share & tools
lore
#0 lore raw

poweroff is not yet implemented on an ia64 machine. Is there anybody aware of it ?

#1 lore raw
Quoted 2 lines · On Thu, 21 Feb 2002 13:32:00 +0100 Jacqueline Lemaitre…

poweroff is not yet implemented on an ia64 machine. Is there anybody aware of it ?

If a machine implements ACPI functionality (both hardware and firmware), powering off should work fine. At least poweroff command works on NEC's AzusA.

Thanks,

Signature · 1 line
KOCHI, Takayoshi <[email protected]/[email protected]>
#2 lore raw
In reply to Jacqueline Lemaitre

It's been working for BigSur for long but Lion needed some more work. I've sent iosapic and acpi patch against 2.4.17 to David that enables ACPI softoff on Lion.
halt -p power-offs with that patch.

thanks,
J.I.

-----Original Message-----
From: KOCHI, Takayoshi [mailto:[email protected]]
Sent: Thursday, February 21, 2002 10:01 AM
To: [email protected]
Subject: Re: [Linux-ia64] Poweroff

Quoted 2 lines · On Thu, 21 Feb 2002 13:32:00 +0100 Jacqueline Lemaitre…

poweroff is not yet implemented on an ia64 machine. Is there anybody aware of it ?

If a machine implements ACPI functionality (both hardware and firmware), powering off should work fine. At least poweroff command works on NEC's AzusA.

Thanks,

Signature · 7 lines
KOCHI, Takayoshi <[email protected]/[email protected]>


_______________________________________________
Linux-IA64 mailing list
[email protected]
http://lists.linuxia64.org/lists/listinfo/linux-ia64
#3 lore raw
In reply to Jacqueline Lemaitre
Quoted 3 lines · Takayoshi

If a machine implements ACPI functionality (both hardware and firmware), powering off should work fine. At least poweroff command works on NEC's AzusA.

I am sorry, it was just a configuration problem.
I thought that CONFIG_ACPI was sufficient.
After I set the CONFIG_ACPI_SYS, I test it on AzusA and it works fine.

Thanks

Jacqueline