zx2000 monitor
Hello:
I received today one Itanium 2 workstation (HP zx2000, very heavy machine :-)
But, I have a trouble I can't attached one VGA display. The connector in the rear of the machine is some "strange", how could I connect my standard monitor?
Best regards,
-Adriano
--
Adriano M. Galano Diez
http://www.satec.es
Phone: (+34) 917 089 000
CPhone: (+34) 600 990 798
Quoted 7 lines · Adriano Galano
Hello:
I received today one Itanium 2 workstation (HP zx2000, very heavy machine :-)
But, I have a trouble I can't attached one VGA display. The connector in the rear of the machine is some "strange", how could I connect my standard monitor?
Is it the EVC connector, perhaps? Here's one answer:
http://bizforums.itrc.hp.com/cm/QuestionAnswer/1,,0x781636e69499d611abdb0090277a778c,00.html
Signature · 3 lines
"It's not Hollywood. War is real, war is primarily not about defeat or victory, it is about death. I've seen thousands and thousands of dead bodies. Do you think I want to have an academic debate on this subject?" -- Robert Fisk
Quoted 4 lines · Matthew Wilcox
Quoted 2 lines · Adriano Galano
Hello:
Quoted 9 lines
Quoted 5 lines
I received today one Itanium 2 workstation (HP zx2000, very heavy machine :-)
But, I have a trouble I can't attached one VGA display. The connector in the rear of the machine is some "strange", how could I connect my standard monitor?Is it the EVC connector, perhaps? Here's one answer:
http://bizforums.itrc.hp.com/cm/QuestionAnswer/1,,0x781636e69499d611abdb0090277a778c,00.html
Unlikely. zx2000 requires a plugin graphics adapter. Typically
this would be an AGP card in slot 2. All the AGP cards available with the system should have a standard 15 pin VGA connector and/or a DVI connector. If your graphics card only has DVI connectors, you can get DVI to VGA converter cables. These usually come with the card. AFAIK, EVC is/was only used on parisc hardware.
Alex
--
Alex Williamson HP Linux & Open Source Lab
Quoted 6 lines · Alex Williamson
Unlikely. zx2000 requires a plugin graphics adapter. Typically
this would be an AGP card in slot 2. All the AGP cards available with the system should have a standard 15 pin VGA connector and/or a DVI connector. If your graphics card only has DVI connectors, you can get DVI to VGA converter cables. These usually come with the card. AFAIK, EVC is/was only used on parisc hardware.
Ah, I didn't realise they were different connectors! You can understand my confusion if you look at the pictures:
http://www.networktechinc.com/dvi.html
Signature · 3 lines
"It's not Hollywood. War is real, war is primarily not about defeat or victory, it is about death. I've seen thousands and thousands of dead bodies. Do you think I want to have an academic debate on this subject?" -- Robert Fisk
Hi:
Quoted 9 lines · Alex Williamson
Quoted 6 lines
Unlikely. zx2000 requires a plugin graphics adapter. Typically
this would be an AGP card in slot 2. All the AGP cards available with the system should have a standard 15 pin VGA connector and/or a DVI connector. If your graphics card only has DVI connectors, you can get DVI to VGA converter cables. These usually come with the card. AFAIK, EVC is/was only used on parisc hardware.
Quoted 6 lines
Ah, I didn't realise they were different connectors! You can understand
my confusion if you look at the pictures:
Is *exactly* the last DVI conector (EVC, or P&D). Where I can get DVI to VGA converter cables?
Regards,
-Adriano
--
Adriano M. Galano Diez
http://www.satec.es
Phone: (+34) 917 089 000
CPhone: (+34) 600 990 798
Quoted 7 lines
--
"It's not Hollywood. War is real, war is primarily not about defeat or
victory, it is about death. I've seen thousands and thousands of dead bodies.
Do you think I want to have an academic debate on this subject?" -- Robert Fisk