Skip to contentSkip to conversation

2.6.0-test1 and 2.5.75-ia64-030712 won't compile with

DISCUSSION Christian Hinkelbein 2 participants 2 messages Jul 16, 2003

lore
Share & tools
lore

Christian Hinkelbein

author
#0 lore raw

Hi,
i tried both 2.6.0-test1 and 2.5.75-ia64-030712
with CONFIG_IA64_GENERIC.
They won't compile:

Quoted 4 lines
Quoted 1 line
Quoted 1 line

include/asm/hw_irq.h: In function `irq_descp':
include/asm/hw_irq.h:130: warning: return from incompatible pointer type

Quoted 1 line
Quoted 1 line
Quoted 8 lines

In file included from include/asm/sn/sn_cpuid.h:20,

                from include/asm/sn/sn_sal.h:17,
                from arch/ia64/sn/io/sgi_io_sim.c:13:

include/asm/nodedata.h:27: NR_NODES' undeclared here (not in a function) include/asm/nodedata.h:28: NR_BANKS' undeclared here (not in a function) include/asm/nodedata.h:29: NR_NODES' undeclared here (not in a function) include/asm/nodedata.h:30: NR_BANKS' undeclared here (not in a function)

Quoted 1 line
Quoted 1 line

looks like the DISCONTIG/NUMA/DIG/GENERIC raised in 2.5.72 issues are still not cleaned up.

with CONFIG_IA64_DIG they compile (with warnings) but don't really run:
2.5.75-ia64-030712 complains about disability to aquire acpi irq, and therefore i do not have network:

Quoted 14 lines
Quoted 1 line
Quoted 1 line

kernel: CPU 0: base freq3.273MHz, ITC ratio/2, ITC freqy9.641MHz+/--1ppm
kernel: Unexpected irq vector 0x0 on CPU 0!
kernel: Console: colour VGA+ 80x25

Quoted 1 line
Quoted 1 line
kernel:  tbxface-0117 [03] acpi_load_tables      : ACPI Tables successfully acquired
kernel: Parsing all Control Methods:.....................................
kernel: Table [DSDT](id F005) - 283 Objects with 29 Devices 37 Methods 12 Regions
kernel: Parsing all Control Methods:.
kernel: Table [SSDT](id F003) - 1 Objects with 0 Devices 1 Methods 0 Regions
kernel: ACPI Namespace successfully loaded at root a0000001006b4c48
kernel: evxfevnt-0093 [04] acpi_enable           : Transition to ACPI mode successful
kernel: evgpeblk-0748 [06] ev_create_gpe_block   : GPE 00 to 15 [_GPE] 2 regs at 0000000000000A0C on int 9
kernel: evgpeblk-0748 [06] ev_create_gpe_block   : GPE 16 to 31 [_GPE] 2 regs at 0000000000000A16 on int 9
Quoted 9 lines
kernel: ACPI: SCI (IRQ-1) allocation failed
kernel:  evevent-0133: *** Error: Unable to install System Control Interrupt Handler, AE_NOT_ACQUIRED
kernel: ACPI: Unable to start the ACPI Interpreter
kernel: evxfevnt-0135 [06] acpi_disable          : Could not exit ACPI mode to legacy mode  evmisc-0563 [05] ev_terminate
kernel:  utalloc-0986 [05] ut_dump_allocations   : No outstanding allocations.
kernel: Trying to free free IRQ0
kernel: ACPI: ACPI tables contain no PCI IRQ routing entries
kernel: PCI: Invalid ACPI-PCI IRQ routing table
Quoted 1 line
Quoted 1 line

2.6.0-test1 crashes during loading too fast, so i can't tell the exact point of failure (sorry, i don't have a serial console).

both kernel-compiles complain about:

Quoted 3 lines

warning: your linker cannot handle cross-segment segment-relative relocations.
please upgrade to a newer version (it is safe to use this linker, but the kernel will be bigger than strictly necessary).

where to get a suitable linker?

all errors occured after make mrproper;make menuconfig; make;

i use binutils 2.14 and gcc 3.2 on a dual i2000.

christian

#1 lore raw
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line · Christian Hinkelbein

Christian> Hi, i tried both 2.6.0-test1 and 2.5.75-ia64-030712 with Christian> CONFIG_IA64_GENERIC. They won't compile:

Yes, that's old news. AFAIR, nobody ever sent me a patch to fix it (hint, hint...).

	--david