2.4.21 + 64K pagesize == BOOM
Someone here tried to build a 2.4.21 kernel with 64k page size, but found that the system reset during boot.
Some tracking showed that the problem was an MCA when the kernel jumped to 0xf000eef3000c0100. Further tracking showed that the jump came from probe_hwif(). Here's some disassembled code (showing just the "br.call" before and after the fatal jump for context):
e0000000046fb93c: (p03) br.call.dpnt.many b0à000000046fde00 <probe_cmos_for_drives>;; e0000000046fb96c: br.call.sptk.many b0à000000046fb580 <hwif_check_regions>;; e0000000046fba7c: br.call.sptk.many b0à00000004476ba0 <printk>;; e0000000046fbabc: (p17) br.call.dpnt.many b0à0000000440dc20 <disable_irq>;; e0000000046fbbdc: br.call.sptk.many b0à000000044b5480 <kmalloc>;; e0000000046fbc1c: br.call.sptk.many b0à00000004476ba0 <printk> e0000000046fbc8c: br.call.sptk.many b0à000000046fb720 <hwif_register> e0000000046fbd3c: (p17) br.call.dpnt.many b0à0000000440de00 <enable_irq>;;
e0000000046fbe10: ld8 r19=[r40];; // get 0x0 into r19 e0000000046fbe16: ld8 r18=[r19],8 // get 0xf000eef3000c0100 into r18 e0000000046fbe1c: nop.i 0x0;; e0000000046fbe20: ld8 r1=[r19] e0000000046fbe26: mov b7=r18 e0000000046fbe2c: br.call.sptk.many b0·;; // JUMP TO 0xf000eef3000c0100 BOOM!
e0000000046fbe5c: br.call.sptk.many b0·;; e0000000046fbe8c: br.call.sptk.many b0·;; e0000000046fbedc: br.call.sptk.many b0à00000004476ba0 <printk>;; e0000000046fbf0c: br.call.sptk.many b0·;; e0000000046fbfec: br.call.sptk.many b0·;; e0000000046fc01c: br.call.sptk.many b0à0000000470f1e0 <ide_delay_50ms>;;
I'm not sure why the dereference 0x0 didn't fault.
Building with CONFIG_BLK_DEV_IDE=n avoids this problem.
Anyone know what's going on here?
-Tony