Skip to contentSkip to conversation

Update to Itanium Software Developer's Manual released

DISCUSSION Luck, Tony 2 participants 2 messages Nov 14, 2003 – Nov 15, 2003

lore
Share & tools
lore

Luck, Tony

author
#0 lore raw

This specification update contains updates to the Intel® Itanium® Architecture Software Developer's Manual, Volume 1-3. This document is a compilation of specification changes, specification clarifications, and documentation changes. This document does not cover errata descriptions.

Download from:

http://developer.intel.com/design/itanium/downloads/248699.htm

-Tony Luck

#1 lore raw

Hi Tony,

I reported this around a year ago but it doesn't seem to have made it into the SDM or the updates - maybe you can pass it on to the right people.

I think the documentation for the "tak" instruction is misleading and should be clarified. It says:

Translation Access Key
Format: (qp) tak r1 = r3
Description: The protection key for a given virtual address is obtained and placed in GR r1.
[...]
GR[r1] = tlb_access_key(GR[r3], itype);

This suggests that you get the protection key in r1, whereas what you actually get is the protection key shifted left by 8 bits (so it lines up with where it is in the TLB and PKR insertion formats).

Matt

Quoted 15 lines · Tony

This specification update contains updates to the Intel? Itanium? Architecture Software Developer's Manual, Volume 1-3. This document is a compilation of specification changes, specification clarifications, and documentation changes. This document does not cover errata descriptions.

Download from:

http://developer.intel.com/design/itanium/downloads/248699.htm

(quoted diff) +0 -2
-Tony Luck
-

To unsubscribe from this list: send the line "unsubscribe linux-ia64" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html