Skip to contentSkip to conversation

pal/power_info for real?

DISCUSSION Duraid Madina 2 participants 2 messages Nov 25, 2003

lore
Share & tools
lore
#0 lore raw

Hi all,

/proc/pal/cpu0/power_info on my system reads:

Power level 0:

         entry_latency       : 9000 cycles
         exit_latency        : 8700 cycles
         power consumption   : 52000 mW
         Cache+TLB coherency : Yes
Power level 1: not implemented
Power level 2:
         entry_latency       : 14000 cycles
         exit_latency        : 8700 cycles
         power consumption   : 52000 mW

Cache+TLB coherency : Yes
Power level 3: not implemented Power level 4: not implemented Power level 5: not implemented Power level 6: not implemented Power level 7: not implemented

Is this correct? Two power levels, with different entry latencies, but
the same power consumption?

Bracing myself for a particularly warm summer,

Duraid

#1 lore raw
Quoted 2 lines · Duraid Madina

Is this correct? Two power levels, with different entry latencies, but
the same power consumption?

Yep, power level 0 is light_halt and 2 is halt2. I can't really
comment on the power consumption, but presumably they're shutting down different portions of the chip. I see the same thing on my boxes. Note that these are all halt state power consumptions, not full running power consumption.

Alex

Signature · 1 line
Alex Williamson                             HP Linux & Open Source Lab