Latest 2.4 IA64 Baseline (Bjorn) testing report
ACPI Test Report for 2.4 ia64 kernel + latest ACPI
=========================
Hardware Configuration:
-----------------------
System Name: ACPI-LION
System Type: 4 way 800M Itanium, Lion
M/B revision: N/A
Processor version: N/A
Firmware Versions: N/A
I/O configuration summary:
QLogic QLA12160, Seagate ST39205LC boot drive IDE floppy and CDROM
Serial console
PS/2 keyboard and mouse
USB mouse
Ethernet Pro 100
Software Configuration:
-----------------------
1.Bk pull form http://lia64.bkbits.net/linux-ia64-2.4 on 11/26 (Shanghai time) 2.Bk pull from http://linux-acpi.bkbits.net/linux-acpi-test-2.4.22 on 11/26 (Shanghai time) failed 3. patch from http://bugzilla.kernel.org/show_bug.cgi?id=1533 to solve kernel unaligned access when pressing power button
ACPI Features Tested: (prioritized).
--------------------
1. Boot off SCSI disk tested ok
2. serial console didn't test
3. PS/2 keyboard tested ok
4. ATI (run X window system) tested ok
5. PS/2 mouse tested ok
6. USB mouse Doesn't work (Both CONFIG_USB_UHCI_ALT and CONFIG_USB_UHCI failed)
7. NIC (eg. Ping or ftp) tested ok
8. IDE (eg. r/w floppy or CDROM) didn't test
9. SCI (eg. Press power button) tested ok
10. Soft Power off tested ok
CPU0 CPU1 CPU2 CPU3
32: 515 2 0 1 IO-SAPIC-edge keyboard 33: 2 0 0 0 IO-SAPIC-edge ide1 34: 4 0 0 33 IO-SAPIC-edge ide0 36: 20 0 0 0 IO-SAPIC-edge PS/2 Mouse 39: 5 0 0 0 IO-SAPIC-level acpi 45: 17 0 0 0 IO-SAPIC-edge serial 48: 43 0 0 0 IO-SAPIC-level usb-uhci 49: 193 0 0 4 IO-SAPIC-level eth0 51: 3631 10 3 169 IO-SAPIC-level qla1280 239: 181356 180392 180014 161679 LSAPIC timer 254: 12686 13140 12899 12983 LSAPIC IPI NMI: 0 0 0 0 ERR: 0
Problems:
1. Failed to bk pull http://linux-acpi.bkbits.net/linux-acpi-test-2.4.22 , Error message was
" Entire repository is locked by:
RESYNC directory.
ERROR-Unable to lock repository for update"
2.PCI: no interrupt route for 00:00:03 pin B.
<<lion.dsl.ZIP>>
3. alloc 0x0-0xcf7 from PCI IO for PCI Bus 00:00 failed (Known issue)
4. hda:end_request: I/O error, dev 03:00 (hda), sector 0end_request: I/O error, dev 03:00 (hda), sector 1end_request: I/O error, dev 03:00 (hda), sector 2
<<dmesg.24.TXT>> <<2.4.config.TXT>> <<lspci.24.TXT>>
Thanks
Luming
Quoted 5 lines · Luming
1. Failed to bk pull http://linux-acpi.bkbits.net/linux-acpi-test-2.4.22 , Error message was
" Entire repository is locked by:
RESYNC directory.
ERROR-Unable to lock repository for update"
This problem's at your end; you need to do some BK magic to fix it. I don't use BK myself, but I'm sure somebody else can tell you how to fix it.
Signature · 3 lines
"It's not Hollywood. War is real, war is primarily not about defeat or victory, it is about death. I've seen thousands and thousands of dead bodies. Do you think I want to have an academic debate on this subject?" -- Robert Fisk
Quoted 10 lines · Matthew Wilcox
Quoted 5 lines · Luming
1. Failed to bk pull http://linux-acpi.bkbits.net/linux-acpi-test-2.4.22 , Error message was
" Entire repository is locked by:
RESYNC directory.
ERROR-Unable to lock repository for update"This problem's at your end; you need to do some BK magic to fix it. I don't use BK myself, but I'm sure somebody else can tell you how to fix it.
I think this means a previous "bk pull" is incomplete because it found changes that need to be merged manually. You should be able to use "bk resolve" to finish that merge, then retry the new "bk pull".
Latest 2.4 IA64 Baseline (Bjorn) testing report (Lion)
In reply to Yu, LumingACPI Test Report for 2.4 ia64 kernel + latest ACPI
=========================
Hardware Configuration:
-----------------------
System Name: ACPI-LION
System Type: 4 way 800M Itanium, Lion
M/B revision: N/A
Processor version: N/A
Firmware Versions: N/A
I/O configuration summary:
QLogic QLA12160, Seagate ST39205LC boot drive IDE floppy and CDROM
Serial console
PS/2 keyboard and mouse
USB mouse
Ethernet Pro 100
Software Configuration:
-----------------------
1.Bk pull form http://lia64.bkbits.net/linux-ia64-2.4 on 12/3 (Shanghai time) 2.Bk pull from http://linux-acpi.bkbits.net/linux-acpi-test-2.4.22 on 12/3 (Shanghai time) 3. patch from http://bugzilla.kernel.org/show_bug.cgi?id=1533 to solve kernel unaligned access when pressing power button Resolved 1 conflict by hand.(Take change from linux-ia64-2.4)
ACPI Features Tested: (prioritized).
--------------------
1. Boot off SCSI disk tested ok
2. serial console tested ok
3. PS/2 keyboard tested ok
4. ATI (run X window system) tested ok
5. PS/2 mouse tested ok
6. USB mouse Doesn't work (Both CONFIG_USB_UHCI_ALT and CONFIG_USB_UHCI failed)
7. NIC (eg. Ping or ftp) tested ok
8. IDE (eg. r/w floppy or CDROM) tested ok
9. SCI (eg. Press power button) tested ok
10. Soft Power off tested ok
CPU0 CPU1 CPU2 CPU3
32: 666 24 2 6 IO-SAPIC-edge keyboard 33: 390 7 3 1 IO-SAPIC-edge ide1 34: 22 11 1 4 IO-SAPIC-edge ide0 36: 434 0 0 0 IO-SAPIC-edge PS/2 Mouse 39: 5 0 0 0 IO-SAPIC-level acpi 44: 136 3 0 0 IO-SAPIC-edge serial 45: 15 2 0 0 IO-SAPIC-edge serial 48: 27 0 0 0 IO-SAPIC-level usb-uhci 49: 1027 24 2 2 IO-SAPIC-level eth0 51: 5780 224 23 75 IO-SAPIC-level qla1280 239: 475473 474608 474212 464881 LSAPIC timer 254: 16742 17274 16081 16602 LSAPIC IPI NMI: 0 0 0 0 ERR: 0
Problems:
1. USB cannot work
USB mose doesn't work like previous report.
2.PCI: no interrupt route for 00:00:03 pin B.
There is only 1 PRT entry below for bus 0, slot 3, pin D in DSDT.and the error message reflect that fact. This error is for device 00:03.3 SMBus. I don't know how to test that device. Actually 2.6 will call acpi_pci_irq_derive try to derive IRQ from a parent bridge's, But 2.4 will not do that. Maybe this is a issue. But it will not help this case.
Package (0x04)
{
0x0003FFFF,
0x03,
0x00,
0x32
}, 3. alloc 0x0-0xcf7 from PCI IO for PCI Bus 00:00 failed (Known issue)
Don't know how to fix
4. I don't have floppy in floppy driver, but below message is quite boring.
ide-floppy: hda: I/O error, pc = 0, key = 2, asc = 3a, ascq = 0
ide-floppy: hda: I/O error, pc = 1b, key = 2, asc = 3a, ascq = 0
hda: No disk in drive
<<dmesg.24.ZIP>> <<lion.2.4.config.ZIP>> <<lspci.24.ZIP>>
Thanks,
Luming
Latest 2.4 IA64 Baseline (Bjorn) testing report (Tiger)
In reply to Yu, LumingACPI Test Report for 2.4 ia64 kernel + latest ACPI
=========================
Hardware Configuration:
-----------------------
System Name: ACPI-Tiger
System Type: 4 way 900 Itanium2, tiger
M/B revision: N/A
Processor version: N/A
Firmware Versions: N/A
I/O configuration summary:
MPT scsi host driver
Seagate ST318406LC boot drive
IDE floppy and CDROM
Serial console
USB mouse
Ethernet Pro 1000
Software Configuration:
-----------------------
1.Bk pull form http://lia64.bkbits.net/linux-ia64-2.4 on 12/3 (Shanghai time) 2.Bk pull from http://linux-acpi.bkbits.net/linux-acpi-test-2.4.22 on 12/3 (Shanghai time) Resolved 1 conflict by hand.(Take change from linux-ia64-2.4)
ACPI Features Tested: (prioritized).
--------------------
1. Boot off SCSI disk tested ok
2. serial console tested ok
3. USB keyboard tested ok
4. ATI (run X window system) tested ok
5. USB mouse tested ok
6. NIC (eg. Ping or ftp) tested ok
7. IDE (eg. r/w floppy or CDROM) tested ok
8. SCI (eg. Press power button) tested ok
9. Soft Power off tested ok
CPU0 CPU1 CPU2 CPU3
32: 0 0 5 0 IO-SAPIC-edge keyboard 34: 0 0 71 1 IO-SAPIC-edge ide0 39: 0 0 4 0 IO-SAPIC-level acpi 45: 0 0 1899 0 IO-SAPIC-edge serial 48: 0 1 46 0 IO-SAPIC-level usb-uhci 49: 7 28 1450 2 IO-SAPIC-level usb-uhci 50: 0 0 0 0 IO-SAPIC-level ehci_hcd 51: 0 4 847 0 IO-SAPIC-level eth0 53: 5 27 4444 0 IO-SAPIC-level ioc0 54: 0 0 42 0 IO-SAPIC-level ioc1 239: 308674 307900 307548 307036 LSAPIC timer 254: 14455 14127 14779 13957 LSAPIC IPI NMI: 0 0 0 0 ERR: 0
Problems:
Please refer Dmesg attached.
[Dmesg, /proc/interrupts, lspci -v , .config are attached below]
<<2.4.ZIP>>
Thanks,
Luming
Yes, I have done that. And it works now.
Thanks
Luming
-----Original Message-----
From: Bjorn Helgaas [mailto:[email protected]]
Sent: 2003?12?2? 1:42
To: Matthew Wilcox; Yu, Luming
Cc: linux-acpi; [email protected]
Subject: Re: Latest 2.4 IA64 Baseline (Bjorn) testing report
Quoted 10 lines · Matthew Wilcox
Quoted 5 lines · Luming
1. Failed to bk pull http://linux-acpi.bkbits.net/linux-acpi-test-2.4.22 , Error message was
" Entire repository is locked by:
RESYNC directory.
ERROR-Unable to lock repository for update"This problem's at your end; you need to do some BK magic to fix it. I don't use BK myself, but I'm sure somebody else can tell you how to fix it.
I think this means a previous "bk pull" is incomplete because it found changes that need to be merged manually. You should be able to use "bk resolve" to finish that merge, then retry the new "bk pull".
Latest 2.4 IA64 Baseline (Bjorn) testing report (Lion)
In reply to Yu, LumingACPI Test Report for 2.4 ia64 kernel + latest ACPI ============Hardware Configuration:
-----------------------
System Name: ACPI-LION
System Type: 4 way 800M Itanium, Lion
M/B revision: N/A
Processor version: N/A
Firmware Versions: N/A
I/O configuration summary:
QLogic QLA12160, Seagate ST39205LC boot drive IDE floppy and CDROM
Serial console
PS/2 keyboard and mouse
USB mouse
Ethernet Pro 100
Software Configuration:
-----------------------
1.Bk pull form http://lia64.bkbits.net/linux-ia64-2.4 on 12/10 (Shanghai time) 2.Bk pull from http://linux-acpi.bkbits.net/linux-acpi-test-2.4.22 on 12/10 (Shanghai time) 3. patch from http://bugzilla.kernel.org/show_bug.cgi?id33 to solve kernel unaligned access when pressing power button Auto-merged without any manual work.
ACPI Features Tested: (prioritized).
--------------------
1. Boot off SCSI disk tested ok
2. serial console tested ok
3. PS/2 keyboard tested ok
4. ATI (run X window system) tested ok
5. PS/2 mouse tested ok
6. USB mouse Doesn't work (Both CONFIG_USB_UHCI_ALT and CONFIG_USB_UHCI failed)
7. NIC (eg. Ping or ftp) tested ok
8. IDE (eg. r/w floppy or CDROM) tested ok
9. SCI (eg. Press power button) tested ok
10. Soft Power off tested ok
CPU0 CPU1 CPU2 CPU3
32: 493 8 0 4 IO-SAPIC-edge keyboard 33: 415 16 0 1 IO-SAPIC-edge ide1 34: 34 2 0 2 IO-SAPIC-edge ide0 36: 1226 415 29 51 IO-SAPIC-edge PS/2 Mouse 39: 9 0 0 0 IO-SAPIC-level acpi 45: 17 0 0 0 IO-SAPIC-edge serial 48: 27 0 0 0 IO-SAPIC-level usb-uhci 49: 3637 244 3 4 IO-SAPIC-level eth0 51: 6356 338 18 52 IO-SAPIC-level qla1280 239: 3321412 3311351 3320288 3319986 LSAPIC timer 254: 17988 19901 19438 19488 LSAPIC IPI NMI: 0 0 0 0 ERR: 0
Problems:
1. USB mouse cannot work
USB mose doesn't work like previous report.
2.PCI: no interrupt route for 00:00:03 pin B. (Known issue)
RE: Latest 2.4 IA64 Baseline (Bjorn) testing report (Lion)
In reply to Yu, Luming ACPI Test Report for 2.4 ia64 kernel + latest ACPI
=========================
Hardware Configuration:
-----------------------
System Name: ACPI-LION
System Type: 4 way 800M Itanium, Lion
M/B revision: N/A
Processor version: N/A
Firmware Versions: N/A
I/O configuration summary:
QLogic QLA12160, Seagate ST39205LC boot drive IDE floppy and CDROM
Serial console
PS/2 keyboard and mouse
USB mouse
Ethernet Pro 100
Software Configuration:
-----------------------
1.Bk pull form http://lia64.bkbits.net/linux-ia64-2.4 on 12/10 (Shanghai time)
2.Bk pull from http://linux-acpi.bkbits.net/linux-acpi-test-2.4.22 on 12/10 (Shanghai time)
3. patch from http://bugzilla.kernel.org/show_bug.cgi?id=1533 to solve kernel unaligned access when pressing power button
Auto-merged without any manual work.
ACPI Features Tested: (prioritized).
--------------------
1. Boot off SCSI disk tested ok
2. serial console tested ok
3. PS/2 keyboard tested ok
4. ATI (run X window system) tested ok
5. PS/2 mouse tested ok
6. USB mouse Doesn't work (Both CONFIG_USB_UHCI_ALT and CONFIG_USB_UHCI failed)
7. NIC (eg. Ping or ftp) tested ok
8. IDE (eg. r/w floppy or CDROM) tested ok
9. SCI (eg. Press power button) tested ok
10. Soft Power off tested ok
CPU0 CPU1 CPU2 CPU3
32: 493 8 0 4 IO-SAPIC-edge keyboard
33: 415 16 0 1 IO-SAPIC-edge ide1
34: 34 2 0 2 IO-SAPIC-edge ide0
36: 1226 415 29 51 IO-SAPIC-edge PS/2 Mouse
39: 9 0 0 0 IO-SAPIC-level acpi
45: 17 0 0 0 IO-SAPIC-edge serial
48: 27 0 0 0 IO-SAPIC-level usb-uhci
49: 3637 244 3 4 IO-SAPIC-level eth0
51: 6356 338 18 52 IO-SAPIC-level qla1280
239: 3321412 3311351 3320288 3319986 LSAPIC timer
254: 17988 19901 19438 19488 LSAPIC IPI
NMI: 0 0 0 0
ERR: 0
Problems:
1. USB mouse cannot work
USB mose doesn't work like previous report.
2.PCI: no interrupt route for 00:00:03 pin B. (Known issue)
3. alloc 0x0-0xcf7 from PCI IO for PCI Bus 00:00 failed (Known issue)
Don't know how to fix
Latest 2.4 IA64 Baseline (Bjorn) testing report (Tiger)
In reply to Yu, LumingACPI Test Report for 2.4 ia64 kernel + latest ACPI
=========================
Hardware Configuration:
-----------------------
System Name: ACPI-Tiger
System Type: 4 way 900 Itanium2, tiger
M/B revision: N/A
Processor version: N/A
Firmware Versions: N/A
I/O configuration summary:
MPT scsi host driver
Seagate ST318406LC boot drive
IDE floppy and CDROM
Serial console
USB mouse
Ethernet Pro 1000
Software Configuration:
-----------------------
1.Bk pull form http://lia64.bkbits.net/linux-ia64-2.4 on 12/10 (Shanghai time) 2.Bk pull from http://linux-acpi.bkbits.net/linux-acpi-test-2.4.22 on 12/10 (Shanghai time) Nothing to pull
ACPI Features Tested: (prioritized).
--------------------
1. Boot off SCSI disk tested ok
2. serial console tested ok
3. USB keyboard tested ok
4. ATI (run X window system) tested ok
5. USB mouse tested ok
6. NIC (eg. Ping or ftp) tested ok
7. IDE (eg. r/w floppy or CDROM) tested ok
8. SCI (eg. Press power button) tested ok
9. Soft Power off tested ok
CPU0 CPU1 CPU2 CPU3
32: 0 0 5 0 IO-SAPIC-edge keyboard 34: 0 0 71 1 IO-SAPIC-edge ide0 39: 0 0 4 0 IO-SAPIC-level acpi 45: 0 0 1899 0 IO-SAPIC-edge serial 48: 0 1 46 0 IO-SAPIC-level usb-uhci 49: 7 28 1450 2 IO-SAPIC-level usb-uhci 50: 0 0 0 0 IO-SAPIC-level ehci_hcd 51: 0 4 847 0 IO-SAPIC-level eth0 53: 5 27 4444 0 IO-SAPIC-level ioc0 54: 0 0 42 0 IO-SAPIC-level ioc1 239: 308674 307900 307548 307036 LSAPIC timer 254: 14455 14127 14779 13957 LSAPIC IPI NMI: 0 0 0 0 ERR: 0
[Dmesg, /proc/interrupts, lspci -v , .config are attached in 2.4.log below]
<<2.4.ZIP>>