Skip to contentSkip to conversation

IA64 test report: 2.4.24-pre1/tiger 2003-12-18: 9/9 pass

DISCUSSION Yu, Luming 2 participants 2 messages Dec 18, 2003

lore
Share & tools
lore

Yu, Luming

author
#0 lore raw

ACPI Test Report for 2.4 ia64 kernel + latest ACPI
=========================
Hardware Configuration:
-----------------------
System Name: ACPI-Tiger
System Type: 4 way 900 Itanium2, tiger
M/B revision: N/A
Processor version: N/A
Firmware Versions: N/A
I/O configuration summary:
MPT scsi host driver
Seagate ST318406LC boot drive
IDE floppy and CDROM
Serial console
USB mouse
Ethernet Pro 1000

Software Configuration:
-----------------------

	1.Bk pull form http://lia64.bkbits.net/linux-ia64-2.4 on 12/18 (Shanghai time)
	2.Bk pull from http://linux-acpi.bkbits.net/linux-acpi-test-2.4.22 on 12/18 (Shanghai time)
	resolved 2 conflicts manually

ACPI Features Tested: (prioritized).
--------------------
1. Boot off SCSI disk tested ok
2. serial console tested ok
3. USB keyboard tested ok
4. ATI (run X window system) tested ok
5. USB mouse tested ok
6. NIC (eg. Ping or ftp) tested ok
7. IDE (eg. r/w floppy or CDROM) tested ok
8. SCI (eg. Press power button) tested ok
9. Soft Power off tested ok

CPU0 CPU1 CPU2 CPU3

 29:          0          0          0          0          LSAPIC  cmc_poll
 30:          0          0          0          0  IO-SAPIC-level  cpe_hndlr
 31:          0          0          0          0          LSAPIC  cmc_hndlr
 34:          1        182          2          0   IO-SAPIC-edge  ide0
 39:          0          5          0          0  IO-SAPIC-level  acpi
 45:          0          6          1          0   IO-SAPIC-edge  serial
 48:          0          0          0          0  IO-SAPIC-level  ehci_hcd
 49:          0       2063         57          0  IO-SAPIC-level  uhci_hcd
 50:          0          0          0          0  IO-SAPIC-level  uhci_hcd
 51:          0       4214         60          0  IO-SAPIC-level  eth0
 56:          0       4097        118          0  IO-SAPIC-level  ioc0
 57:          0         42          0          0  IO-SAPIC-level  ioc1
232:          0          0          0          0          LSAPIC  mca_rdzv
238:          0          0          0          0          LSAPIC  perfmon
239:    2572798    2566770    2567274    2566821          LSAPIC  timer
240:          0          0          0          0          LSAPIC  mca_wkup
254:         36         95        106         99          LSAPIC  IPI
NMI:          0          0          0          0
ERR:          0

Problems:
1.alloc 0x0-0x5fff from PCI IO for PCI Bus 00:00 failed Known issue, bjorn has idea to fix it.

2.PCI: no interrupt route for 00:00:1f pin A
Please refere http://bugzilla.kernel.org/show_bug.cgi?id=1534

3.Unable to handle kernel NULL pointer dereferencehwclock[43]: Oops 8804682956800
Pid: 43, CPU 2, comm: hwclock

<<2.4.ZIP>>

#1 lore raw
Quoted 2 lines · Luming

3.Unable to handle kernel NULL pointer dereferencehwclock[43]: Oops 8804682956800
Pid: 43, CPU 2, comm: hwclock

This was caused by a screwed up EFI RTC patch. I sent Marcelo a fix yesterday, and he applied it. Here's the patch, in case you're interested:

=== drivers/char/efirtc.c 1.6 vs edited ==--- 1.6/drivers/char/efirtc.c Fri Oct 24 04:35:10 2003
+++ edited/drivers/char/efirtc.c Wed Dec 17 14:33:08 2003
@@ -118,7 +118,7 @@
static void
convert_from_efi_time(efi_time_t *eft, struct rtc_time *wtime) {
- memset(&wtime, 0, sizeof(struct rtc_time));
+ memset(wtime, 0, sizeof(struct rtc_time));
wtime->tm_sec = eft->second;
wtime->tm_min = eft->minute;
wtime->tm_hour = eft->hour;