AWE64 initial questions
Hi all. I haven't played with my SB AWE64 in quite a while, so I'm no longer sure how to get it going again.
Can someone tell me how to get the PnP stuff going? Where do I get started? Whereis the FAQ? Is the isapnptools necessary under 2.1 still?
Also, if I was looking for a sound-playing program, where is the best place to look? Is there one program that does CD audio, and other audio file formats?
Thanks,
Dave
Quoted 7 lines · Dave Wreski
Hi all. I haven't played with my SB AWE64 in quite a while, so I'm no longer sure how to get it going again.
Can someone tell me how to get the PnP stuff going? Where do I get started? Whereis the FAQ? Is the isapnptools necessary under 2.1 still?
Quoted 7 lines
Also, if I was looking for a sound-playing program, where is the best place to look? Is there one program that does CD audio, and other audio file formats?
Thanks,
Dave
Hello Dave and all,
here is what i did with isapnp to my AWE64Gold:
(CONFIGURE CTL009e/4234717 (LD 0
# ANSI string -->Audio<--
(INT 0 (IRQ 5 (MODE +E)))
(DMA 0 (CHANNEL 1))
(DMA 1 (CHANNEL 5))
(IO 0 (BASE 0x0220))
(IO 1 (BASE 0x0330))
(IO 2 (BASE 0x0388))
(ACT Y)
))
(CONFIGURE CTL009e/4234717 (LD 1
# ANSI string -->Game<--
(IO 0 (BASE 0x0200))
(ACT Y)
))
(CONFIGURE CTL009e/4234717 (LD 2
# ANSI string -->WaveTable<--
(IO 0 (BASE 0x0620))
(IO 1 (BASE 0x0A20))
(IO 2 (BASE 0x0E20))
(ACT Y)
))
A problem might be, that pnpdump is not generating the second and third io for
the wave table synth. Another on is (for me), that midi output to my keyboard
(musical not computer :-) ) does not work, neither with OSS/Free nor with
OSS/Linux.
You can find Your Win95 config in a file named CTPNP.CFG in the Windows directory
and set the values accordingly to avoid resource conflicts.
Remember that you have to download a sound font bank to the Wave table with a command like this:
/usr/local/bin/sfxload /win95/Programme/Creative/ctsnd/sfbank/synthgs.sbk
Bye, Emil.
--
--------------------------------------------------
Emil Stephan, Marktplatz 39, 53773 Hennef, Germany
voice: +49-2242-84438
Accelerate Windows: 9.81 m/sec^2 would be adequate
Quoted 5 lines
Quoted 2 lines
Can someone tell me how to get the PnP stuff going? Where do I get started? Whereis the FAQ? Is the isapnptools necessary under 2.1 still?
Hello Dave and all,
here is what i did with isapnp to my AWE64Gold:
Ok, as it turns out, I did get it going. I used the sndconfig program found at ftp.redhat.com:/pub/sound/ and it generated an /etc/isapnp.conf file identical to yours. Has anyone else used this program, or must I go to [email protected] for questions on this?
After using 'isapnp /etc/isapnp.conf', how can I tell it worked? It didn't complain, but there was also no information available in the normal /proc files, such as /proc/{interrupts,dma,ioports} etc.. Should there be, or only after the sound module is installed?
Quoted 2 lines
You can find Your Win95 config in a file named CTPNP.CFG in the Windows directory and set the values accordingly to avoid resource conflicts.
Umm... yeah.. No windows here..
Quoted 5 lines
Remember that you have to download a sound font bank to the Wave table with a command like this:
/usr/local/bin/sfxload/win95/Programme/Creative/ctsnd/sfbank/synthgs.sbk
Where can I find these necessary files?
Any idea why an RPM hasn't been created for the SBAWE64 yet? I would think this methodical process would be easy to create an RPM for...
Thanks,
Dave
insmod sound
cat /dev/sndstat
Maddog
Quoted 5 lines · Dave Wreski
After using 'isapnp
/etc/isapnp.conf', how can I tell it worked? It didn't complain, but there was also no information available in the normal /proc files, such as/proc/{interrupts,dma,ioports}etc.. Should there be, or only after the sound module is installed?
Quoted 4 lines
After using 'isapnp
/etc/isapnp.conf', how can I tell it worked? It didn't complain, but there was also no information available in the normal /proc files, such as/proc/{interrupts,dma,ioports}etc.. Should there be, or only after the sound module is installed?
I f*cked my isapnp.conf config using RedHat's sndconfig. If it works for you, MY mileage varied. I used pnpdump and then edited the file by hand, remembering my Win95 setup. No problem then. I forgot to uncomment the wave synth section (I had some headaches till I found the commented entries!)
There was also a problem with /etc/conf.modules and the dma entries. (if you get a error like 'sound: too many values for dma') you have the problem. If you see 'AWE32 detected (512k RAM)' after loading the module, everything is ok.
Quoted 6 lines
Quoted 5 lines
Remember that you have to download a sound font bank to the Wave table with a command like this:
/usr/local/bin/sfxload/win95/Programme/Creative/ctsnd/sfbank/synthgs.sbkWhere can I find these necessary files?
In your AWE64 CD (installed automatically when using Windows). Remember to tweak the command line parameters to sfxload,you may experience better sound using the -atenuate option.
Quoted 2 lines
Any idea why an RPM hasn't been created for the SBAWE64 yet? I would think this methodical process would be easy to create an RPM for...
I havent seen RPMs of patched kernels...
---------------------------------------------------------------------
J.Lupion Lopez | http://face.el.uma.es/~lupi | [[[ In Stereo where available ]]] |
---------------------------------------------------------------------
Hello Dave,
Quoted 6 lines · Dave Wreski
...
After using 'isapnp
/etc/isapnp.conf', how can I tell it worked? It didn't complain, but there was also no information available in the normal /proc files, such as/proc/{interrupts,dma,ioports}etc.. Should there be, or only after the sound module is installed?
In /proc You really see nothing, if the driver is not loaded. Same with other
modules here, e.g. those loaded by kerneld.
But did You use pnpdump to create a prototype isapnp.conf or did You use the one,
that came with Your Linux distribution ?
Quoted 11 lines
Quoted 3 lines
You can find Your Win95 config in a file named CTPNP.CFG in the Windows directory and set the values accordingly to avoid resource conflicts.
Umm... yeah.. No windows here..
Quoted 5 lines
Remember that you have to download a sound font bank to the Wave table with a command like this:
/usr/local/bin/sfxload/win95/Programme/Creative/ctsnd/sfbank/synthgs.sbk
Oh Sorry, these are only used if Your AWE64 has RAM on board. These come with
the win95 drivers of the card. But since You have no Win95, they aren't installed.
Have a look at the AWE drivers web site:
http://bahamut.mm.t.u-tokyo.ac.jp/~iwai/awedrv/
You'll find the sources for sfxload there and some links to sound banks, i hope.
Another fine site for linux sound is:
http://www.bright.net/~dlphilp/linux_soundapps.html
There are many links to sound apps for Linux.
Quoted 7 lines
Where can I find these necessary files?
Any idea why an RPM hasn't been created for the SBAWE64 yet? I would think this methodical process would be easy to create an RPM for...
Thanks,
Dave
Bye, Emil.
Signature · 5 lines
-------------------------------------------------- Emil Stephan, Marktplatz 39, 53773 Hennef, Germany voice: +49-2242-84438 Accelerate Windows: 9.81 m/sec^2 would be adequate
Quoted 11 lines
Quoted 5 lines
After using 'isapnp
/etc/isapnp.conf', how can I tell it worked? It didn't complain, but there was also no information available in the normal /proc files, such as/proc/{interrupts,dma,ioports}etc.. Should there be, or only after the sound module is installed?I f*cked my isapnp.conf config using RedHat's sndconfig. If it works for you, MY mileage varied. I used pnpdump and then edited the file by hand, remembering my Win95 setup. No problem then. I forgot to uncomment the wave synth section (I had some headaches till I found the commented entries!)
I think the version I used was just released a day or so before I used it. Perhaps the problems you had have been fixed now. It's still got some problems, however, but I managed to trick it into working.
I think it's very important that sound works effortlessly on Linux. The average Window's convert won't have the patience to go thru all these steps...
Dave
Quoted 4 lines · Dave Wreski
Ok, as it turns out, I did get it going. I used the sndconfig program found at ftp.redhat.com:/pub/sound/ and it generated an
/etc/isapnp.conffile identical to yours. Has anyone else used this program, or must I go to [email protected] for questions on this?
Actually, that's [email protected]. But no, you don't need to go there.
Quoted 4 lines
After using 'isapnp
/etc/isapnp.conf', how can I tell it worked? It didn't complain, but there was also no information available in the normal /proc files, such as/proc/{interrupts,dma,ioports}etc.. Should there be, or only after the sound module is installed?
No; the information will only show up in /proc after the resources have been allocated by the kernel (i.e., the drivers have been loaded).
Quoted 7 lines
Quoted 5 lines
Remember that you have to download a sound font bank to the Wave table with a command like this:
/usr/local/bin/sfxload/win95/Programme/Creative/ctsnd/sfbank/synthgs.sbkWhere can I find these necessary files?
sfxload is part of the awesfx package, available from
http://bahamut.mm.t.u-tokyo.ac.jp/~iwai/awedrv/index.html
There's an RPM in contrib (I haven't tested it, but it should work fine).
synthgm.sbk/synthgs.sbk should be on your AWE64 driver disk/CD.
Bill
Quoted 3 lines · Dave Wreski
I think it's very important that sound works effortlessly on Linux. The average Window's convert won't have the patience to go thru all these steps...
This is why isapnp under linux needs some serious work. (Underscore, blink, neon lights, until SOMEONE gets the message).
Right now its not acceptable for isapnp to work better under doze95 than linux. :-(
-Dan
Quoted 7 lines
Quoted 4 lines
After using 'isapnp
/etc/isapnp.conf', how can I tell it worked? It didn't complain, but there was also no information available in the normal /proc files, such as/proc/{interrupts,dma,ioports}etc.. Should there be, or only after the sound module is installed?No; the information will only show up in /proc after the resources have been allocated by the kernel (i.e., the drivers have been loaded).
Hmm.. There must be _something_ I can use to discern whether or not it's worked...
Dave
Quoted 2 lines
Hmm.. There must be _something_ I can use to discern whether or not it's worked...
Only after you 'modprobe sound' and everything goes ok. Something like 'AWE synth detected (512K)' appears on my
system. Before inserting the module you cannot tell
anything. (Am I wrong...?)
---------------------------------------------------------------------
J.Lupion Lopez | "No se pueden tomar vacaciones http://face.el.uma.es/~lupi | en la escuela de la vida" | --- Espartaco Santoni
---------------------------------------------------------------------
Quoted 10 lines · On 09-Sep-98 Dan Hollis wrote:
Quoted 3 lines · Dave Wreski
I think it's very important that sound works effortlessly on Linux. The average Window's convert won't have the patience to go thru all these steps...
This is why isapnp under linux needs some serious work. (Underscore, blink, neon lights, until SOMEONE gets the message).
Right now its not acceptable for isapnp to work better under doze95 than linux. :-(
I think what we need is a Linux Publicity Group, which serves to make the companies aware of just what functionality is currently available. In other words, inform the sound manufacturers of our current "Proof of Concept". It is in fact possible to produce sound on Linux, and the board can work correctly if a full-blown driver was written for it..
Maybe someone's interested in putting together an Applix document describing the current functionality of the sound driver, that is presentable to various companies? Or is it abominally poor at this point?
Or does none of what I said sound like even a remotely good idea? ;)
Dave
Quoted 9 lines · Dave Wreski
Quoted 8 lines · On 09-Sep-98 Dan Hollis wrote:
Quoted 3 lines · Dave Wreski
I think it's very important that sound works effortlessly on Linux. The average Window's convert won't have the patience to go thru all these steps...
This is why isapnp under linux needs some serious work. (Underscore, blink, neon lights, until SOMEONE gets the message). Right now its not acceptable for isapnp to work better under doze95 than linux. :-(
Quoted 5 lines
I think what we need is a Linux Publicity Group, which serves to make the companies aware of just what functionality is currently available. In other words, inform the sound manufacturers of our current "Proof of Concept". It is in fact possible to produce sound on Linux, and the board can work correctly if a full-blown driver was written for it..
This isnt going to help.
The fundamental problem is a lack of proper isapnp support in the linux kernel itself. Until this gets fixed, nothing is going to work right.
Right now getting isapnp devices working under linux is an evil mess.
-Dan
Quoted 6 lines · Juan Lupion
Quoted 4 lines
After using 'isapnp
/etc/isapnp.conf', how can I tell it worked? It didn't complain, but there was also no information available in the normal /proc files, such as/proc/{interrupts,dma,ioports}etc.. Should there be, or only after the sound module is installed?I f*cked my isapnp.conf config using RedHat's sndconfig. If it
Even worse, sndconfig (at least the version I tried last) is aimed at using Red Hat-specific sound modularization patches. This give different module names & parameters than the stuff in Linux 2.1 or the stuff in OSS/Linux (the commercial sound driver).
Hamish
Signature · 4 lines
Hamish Moffatt, StudIEAust [email protected], [email protected] Student, computer science & computer systems engineering. 4th year, RMIT. http://hamish.home.ml.org/ (PGP key here) CPOM: [******* ] 73% Get a stable, reliable & upgradable operating system free at www.debian.org
Quoted 10 lines · Dan Hollis
Quoted 3 lines · Dave Wreski
I think it's very important that sound works effortlessly on Linux. The average Window's convert won't have the patience to go thru all these steps...
This is why isapnp under linux needs some serious work. (Underscore, blink, neon lights, until SOMEONE gets the message).
Right now its not acceptable for isapnp to work better under doze95 than linux. :-(
What's wrong with isapnptools? Works fine for me. Setting up /etc/isapnp.conf is a bit harder than letting Windows do it for you, but Linux is general requires more intelligence than 95/98 at present. As a result, you get more flexibility; isapnp doesn't care where you stick your hardware, while Windows will do everything it can to stop you manually allocating machine resources.
To me, Linux uses isapnp just like software setup of ethernet cards; it lets me pick where to put hardware without changing jumpers, rather than allocating it where it THINKS it fits.
Hamish
Signature · 4 lines
Hamish Moffatt, StudIEAust [email protected], [email protected] Student, computer science & computer systems engineering. 4th year, RMIT. http://hamish.home.ml.org/ (PGP key here) CPOM: [******* ] 73% "Note that in C++, as in life, friendship is not transitive" -- TC++3 manual
Quoted 7 lines
What's wrong with isapnptools? Works fine for me. Setting up
/etc/isapnp.confis a bit harder than letting Windows do it for you, but Linux is general requires more intelligence than 95/98 at present. As a result, you get more flexibility; isapnp doesn't care where you stick your hardware, while Windows will do everything it can to stop you manually allocating machine resources.
There's nothing wrong with isapnptools, necessarily. It would just be nice if first it was easy to do, then it was very customizable. While we're boasting about how configurable it is to use, the idiot windows users are listing to the latest Pearl Jam, and playing Quake.
Quoted 3 lines
To me, Linux uses isapnp just like software setup of ethernet cards; it lets me pick where to put hardware without changing jumpers, rather than allocating it where it THINKS it fits.
Well, I also agree here, but if we keep demanding this, it could later provide unecessary constraints on PC vendors, requring they ship a machine with a jumper-based board. (Among other problems, I'm sure...)
Dave
Quoted 10 lines · Hamish Moffatt
What's wrong with isapnptools? Works fine for me. Setting up
/etc/isapnp.confis a bit harder than letting Windows do it for you, but Linux is general requires more intelligence than 95/98 at present. As a result, you get more flexibility; isapnp doesn't care where you stick your hardware, while Windows will do everything it can to stop you manually allocating machine resources.To me, Linux uses isapnp just like software setup of ethernet cards; it lets me pick where to put hardware without changing jumpers, rather than allocating it where it THINKS it fits.
I agree pnpdump/isapnp is a snap to use once you get used to it, but it's pretty difficult at the start when you just want to get your sound card working.
At the moment I think a little shell script which worked like xf86config or even the kernel "make config" would be a big improvement. Ie, it just seds the pnpdump file and gives you options:
% pnpsetup
Detected: "Creative Labs PnP Sound Chip"
Use this device? (y/n) y
What IO base? (220, 240, 260, 280, 2A0, 300) 280
What IRQ? (5, 7, 9, 10, 11) 10
Etc. With a little bit of smarts it could keep track of which irqs were already in use (and check /proc/pci to not overlap with non-isa pnp stuff) and warn of conflicts. This would be highly useful to a person who is perfectly familiar with setting up their sound blaster to run DOS games
- a "computer person" without being a unix wizard, who is probably Linux's biggest potential target audience right now.
I'd do it myself if I could program shell scripts worth a damn. Or does something like this already exist?
Quoted 9 lines · Adam Wiggins
At the moment I think a little shell script which worked like xf86config or even the kernel "make config" would be a big improvement. Ie, it just seds the pnpdump file and gives you options:
% pnpsetup
Detected: "Creative Labs PnP Sound Chip"
Use this device? (y/n) y
What IO base? (220, 240, 260, 280, 2A0, 300) 280
What IRQ? (5, 7, 9, 10, 11) 10
Actually, that does sound pretty cool. I might write it, unless someone else has more time than I do (not hard) or more interest than I do and wants to volunteer. I'll test it; I have PnP sound cards and modems here, although not in the same box.
Hamish
I would like to work on this. I've been running linux for a while now but never have bothered with sound. The last time I compiled my kernel I included sound as a module but haven't made time to play around with getting the plug-n-prey to work. This would be good experience for me as well as force me to finish my system setup :->
I was thinking of just implementing the script with perl. (Seems easy anough.) Are there any common pit falls that anyone can think of?
- Rusty Lynch ([email protected])
Quoted 19 lines · Hamish Moffatt
Quoted 9 lines · Adam Wiggins
At the moment I think a little shell script which worked like xf86config or even the kernel "make config" would be a big improvement. Ie, it just seds the pnpdump file and gives you options:
% pnpsetup
Detected: "Creative Labs PnP Sound Chip"
Use this device? (y/n) y
What IO base? (220, 240, 260, 280, 2A0, 300) 280
What IRQ? (5, 7, 9, 10, 11) 10Actually, that does sound pretty cool. I might write it, unless someone else has more time than I do (not hard) or more interest than I do and wants to volunteer. I'll test it; I have PnP sound cards and modems here, although not in the same box.
Hamish
Quoted 8 lines · On 12-Sep-98 [email protected] wrote:
I would like to work on this. I've been running linux for a while now but never have bothered with sound. The last time I compiled my kernel I included sound as a module but haven't made time to play around with getting the plug-n-prey to work. This would be good experience for me as well as force me to finish my system setup :->
I was thinking of just implementing the script with perl. (Seems easy anough.) Are there any common pit falls that anyone can think of?
Guys, while I think this is a good idea, and something that surely can help a lot of people, perhaps your efforts would be better applied if you focused on the sndconfig utility that already has a moderately-working implementation.
Wouldn't it be better to start with the internals of sndconfig, port it to your version of Linux, and resubmit the changes back to the maintainer of sndconfig?
Perhaps someone wants to make it gtk-capable, so we can have a graphical means of controlling our PnP devices...
Dave
For the sake of sounding rude...
But if we did that, and make it all simple like, wouldnt we then have windoze?
-----Original Message-----
From: Dave Wreski <[email protected]>
To: [email protected] <[email protected]>
Cc: Linux Sound Mailing List <[email protected]>; Linux Sound Mailing List <[email protected]>; Adam Wiggins <[email protected]>; Hamish Moffatt <[email protected]>
Date: Saturday, September 12, 1998 9:00 PM
Subject: Re: AWE64 initial questions
Quoted 3 lines · On 12-Sep-98 [email protected] wrote:
Quoted 1 line
I would like to work on this. I've been running linux for a while now
but
Quoted 9 lines
Quoted 7 lines
never have bothered with sound. The last time I compiled my kernel I included sound as a module but haven't made time to play around with getting the plug-n-prey to work. This would be good experience for me as well as force me to finish my system setup :->
I was thinking of just implementing the script with perl. (Seems easy anough.) Are there any common pit falls that anyone can think of?
Guys, while I think this is a good idea, and something that surely can help
a
Quoted 1 line
lot of people, perhaps your efforts would be better applied if you focused
on
Quoted 3 lines
the sndconfig utility that already has a moderately-working implementation.
Wouldn't it be better to start with the internals of sndconfig, port it to
your
Quoted 1 line
version of Linux, and resubmit the changes back to the maintainer of
sndconfig?
Quoted 2 lines
Perhaps someone wants to make it gtk-capable, so we can have a graphical
means
Quoted 4 lines
of controlling our PnP devices...
Dave
No-
Linux wouldnt crash....
Quoted 43 lines · On 13-Sep-98 Jim wrote:
For the sake of sounding rude...
But if we did that, and make it all simple like, wouldnt we then have windoze?-----Original Message-----
From: Dave Wreski <[email protected]>
To: [email protected] <[email protected]>
Cc: Linux Sound Mailing List <[email protected]>; Linux Sound Mailing List <[email protected]>; Adam Wiggins <[email protected]>; Hamish Moffatt <[email protected]>
Date: Saturday, September 12, 1998 9:00 PM
Subject: Re: AWE64 initial questionsQuoted 3 lines · On 12-Sep-98 [email protected] wrote:
Quoted 1 line
I would like to work on this. I've been running linux for a while now
but
Quoted 9 lines
Quoted 7 lines
never have bothered with sound. The last time I compiled my kernel I included sound as a module but haven't made time to play around with getting the plug-n-prey to work. This would be good experience for me as well as force me to finish my system setup :->
I was thinking of just implementing the script with perl. (Seems easy anough.) Are there any common pit falls that anyone can think of?
Guys, while I think this is a good idea, and something that surely can help
a
Quoted 1 line
lot of people, perhaps your efforts would be better applied if you focused
on
Quoted 3 lines
the sndconfig utility that already has a moderately-working implementation.
Wouldn't it be better to start with the internals of sndconfig, port it to
your
Quoted 1 line
version of Linux, and resubmit the changes back to the maintainer of
sndconfig?
Quoted 2 lines
Perhaps someone wants to make it gtk-capable, so we can have a graphical
means
Quoted 4 lines
of controlling our PnP devices...
Dave
Quoted 3 lines
Guys, while I think this is a good idea, and something that surely can help a lot of people, perhaps your efforts would be better applied if you focused on the sndconfig utility that already has a moderately-working implementation.
Enlighten us, then. What is sndconfig and where can we find a copy?
Quoted 6 lines
Quoted 4 lines
Guys, while I think this is a good idea, and something that surely can help a lot of people, perhaps your efforts would be better applied if you focused on the sndconfig utility that already has a moderately-working implementation.
Enlighten us, then. What is sndconfig and where can we find a copy?
Check out:
ftp://ftp.redhat.com/pub/sound/sndconfig
It seems to be able to probe your system for PnP sound cards. Actually, I'm not sure if it's capable of probing for more than just SB cards. Also, I think it's configured to use the new sound modules available in the development kernels, and a patch to 2.0.35.
Perhaps the gentleman from RH can respond?
Dave
Just this last weekend I was looking at the source code for sndconfig. As far as the probing sound cards go, sndconfig just runs pnpdump and then parses through the output looking for sound blaster entries. If there are no sound blaster entries then your out of luck. Adding other sound cards doesn't look like it would be to hard to do.
Although, I found that my CS4236B ANSI entries from pnpdump has a nasty habit of sticking a null on the end. When sndconfig parses through the pnpdump output, it dumps out as soon as it comes across the CS4236B entry. Has anyone else seen pnp sound cards that stick null's within pnpdump's output?
Quoted 21 lines · Dave Wreski
Quoted 6 lines
Quoted 4 lines
Guys, while I think this is a good idea, and something that surely can help a lot of people, perhaps your efforts would be better applied if you focused on the sndconfig utility that already has a moderately-working implementation.
Enlighten us, then. What is sndconfig and where can we find a copy?
Check out:
ftp://ftp.redhat.com/pub/sound/sndconfig
It seems to be able to probe your system for PnP sound cards. Actually, I'm not sure if it's capable of probing for more than just SB cards. Also, I think it's configured to use the new sound modules available in the development kernels, and a patch to 2.0.35.
Perhaps the gentleman from RH can respond?
Dave
Quoted 10 lines · Dave Wreski
Check out:
ftp://ftp.redhat.com/pub/sound/sndconfig
It seems to be able to probe your system for PnP sound cards. Actually, I'm not sure if it's capable of probing for more than just SB cards. Also, I think it's configured to use the new sound modules available in the development kernels, and a patch to 2.0.35.
Perhaps the gentleman from RH can respond?
While I have no idea who this gentleman is you speak of...
sndconfig is more or less (for PnP cards) a wrapper that reads the output of pnpdump and writes an isapnp.conf file. Currently (i.e., the beta version in /pub/sound/sndconfig) it recognizes SB, ESS, GUS, Ensoniq SoundScape,
CS4232 & (one) Turtle Beach PnP cards through a verrrry simple algorithm. It takes advantage of the '--config' option of pnpdump to attempt to autoconfigure PnP cards - this option tells pnpdump to attempt to find nonconflicting values (via looking at /proc/interrupts, etc.). What it notably *doesn't* do is actually read the pnpdump output to determine the ranges of settings to use; the choices available are hardcoded if the user is inputting them. It probably should be changed to do this. It also may not quite configure all the cards that it tries to correctly, as we don't have all of them to test. :)
Yes, it does require the sound drivers from either a 2.1.late kernel, or Alan's sound patches.
Of course, if anyone wants to use this as a base point for a generic PnP configuration utility, they can. It certainly isn't a particularly complicated program/idea; there's probably quite a few ways to do the same thing.
Bill
Quoted 10 lines · Dave Wreski
Quoted 3 lines
Quoted 3 lines
Guys, while I think this is a good idea, and something that surely can help a lot of people, perhaps your efforts would be better applied if you focused on the sndconfig utility that already has a moderately-working implementation.
Check out:
ftp://ftp.redhat.com/pub/sound/sndconfigIt seems to be able to probe your system for PnP sound cards. Actually, I'm not sure if it's capable of probing for more than just SB cards. Also, I think it's configured to use the new sound modules available in the development kernels, and a patch to 2.0.35.
But that's sound configuration -- I think we are talking about a generic PnP utility to handle sound, modems, network cards etc. I certainly was.
Last time I looked at sndconfig (a while back) it did not use the new sound modules, but some Redhat-specific sound modularization patches. Hence it did not work for me on my Debian system; otherwise we would probably have a Debian package of it.
Hamish
Signature · 4 lines
Hamish Moffatt, StudIEAust [email protected], [email protected] Student, computer science & computer systems engineering. 4th year, RMIT. http://hamish.home.ml.org/ (PGP key here) CPOM: [******* ] 73% "Note that in C++, as in life, friendship is not transitive" -- TC++3 manual
Quoted 8 lines · On Sat, Sep 12, 1998 at 12:54:21PM -0700, [email protected] wrote:
I would like to work on this. I've been running linux for a while now but never have bothered with sound. The last time I compiled my kernel I included sound as a module but haven't made time to play around with getting the plug-n-prey to work. This would be good experience for me as well as force me to finish my system setup :->
I was thinking of just implementing the script with perl. (Seems easy anough.) Are there any common pit falls that anyone can think of?
perl is where I'd start too. No pitfalls that I know of, but I haven't done a lot of perl myself either.
Hamish
Signature · 4 lines
Hamish Moffatt, StudIEAust [email protected], [email protected] Student, computer science & computer systems engineering. 4th year, RMIT. http://hamish.home.ml.org/ (PGP key here) CPOM: [******* ] 73% Matter cannot be created or destroyed, nor returned without a receipt.