Skip to contentSkip to conversation

CS4237B configuration

DISCUSSION Vincent Bruyninckx 1 participant 1 message Sep 10, 1998 Sound

lore
Share & tools
lore
#0 lore raw

(also posted on comp.os.linux.setup)

Hi ! I'm the proud owner of an IBM ThinkPad 380XD running Linux Red Hat 5.1, with a CS4237B sound chip. This distribution uses the module versions of the OSS/Free sound drivers. Of these, cs4232.o should work, but it doesn't really : mpg123, for instance, loops the beginning of a file forever (I mean until Ctrl-C ;-) ). Sounds like an IRQ problem, hm ? The trouble is that onboard audio seems to be PnP in this machine; the

only parameter set (address, IRQ, DMA channels) I could find and put into conf.modules was the one given by the Win95 device manager. Could it be that the chip uses different IRQs for Win95 (PnP compliant) and Linux (fortunately not -- except if you have PnP hardware !) ? If so (or not, after all), can I do something else than try all possible

IRQ/DMA combinations ?

Thanks in advance,

Vince