Crystal CS4235 with 2.2.0-pre7
i have the same chip (aopen MB) and i had problems too, (i use the 2.0.36) but i got it to werk by swapping the dma's so that i had 534, irq 5, dma=1 and dma2=0 and that, oddly enough, seemed to work...and not that bad either...altough i have on board video also and when i was trying to use that it would get very bad sound....
regards,
Josh
<SNIP>
Quoted 27 lines
Hi,
Alan Cox stated a few weeks ago that there is support for the Crystal soundchip CS4235 in kernel 2.1.132ac1. I have an Acer motherboard with this chip and so decided to make the latest available kernel linux-2.2.0-pre7.
I found no references to CS4235 and so took the closest config option CS4232.
Unfortunately
cat
/usr/lib/xemacs-20.4/etc/sounds/im_so_happy.au>/dev/audiosimply gave silence.
I would be very glad if someone out there could give me advice.
Kind regards
Gerd
Here are the details:
To avoid module trouble I made a kernel with builtin support for CS4232. These are my defines:
Quoted 8 lines
CONFIG_SOUND_CS4232=yCONFIG_CS4232_BASES4CONFIG_CS4232_IRQ=5CONFIG_CS4232_DMA=0CONFIG_CS4232_DMA2=1
CONFIG_CS4232_MPU_BASE:8CONFIG_CS4232_MPU_IRQ=9
<SNIP>
______________________________________________________
Get Your Private, Free Email at http://www.hotmail.com
Hi,
Alan Cox stated a few weeks ago that there is support for the Crystal soundchip CS4235 in kernel 2.1.132ac1. I have an Acer motherboard with this chip and so decided to make the latest available kernel linux-2.2.0-pre7.
I found no references to CS4235 and so took the closest config option CS4232.
Unfortunately
cat /usr/lib/xemacs-20.4/etc/sounds/im_so_happy.au > /dev/audio
simply gave silence.
I would be very glad if someone out there could give me advice.
Kind regards
Gerd
Here are the details:
To avoid module trouble I made a kernel with builtin support for CS4232. These are my defines:
CONFIG_SOUND_CS4232=yCONFIG_CS4232_BASES4CONFIG_CS4232_IRQ=5CONFIG_CS4232_DMA=0CONFIG_CS4232_DMA2=1
CONFIG_CS4232_MPU_BASE:8CONFIG_CS4232_MPU_IRQ=9
I took the values from Windows98 which is alternatively running on the same box and working fine with the CS4235.
dmesg says the following:
Sound initialization started
<Crystal audio controller (CS4235)> at 0x534 irq 5 dma 0,1
ad1848: Interrupt test failed (IRQ5)
Sound initialization complete
cat /dev/sndstat gives me:
Linux kiki 2.2.0-pre7 #4 Sun Jan 17 06:21:47 CET 1999 i686 unknown OSS/Free:3.8s2++-971130
Load type: Driver compiled into kernel
Kernel: Linux kiki 2.2.0-pre7 #4 Sun Jan 17 06:21:47 CET 1999 i686 Config options: 0
Installed drivers:
Type 21: CS4232
Type 22: CS4232 MIDI
Type 26: MPU-401 (UART)
Card config:
CS4232 MIDI at 0x3a8 irq 9 drq 0
CS4232 at 0x534 irq 5 drq 0,1
Audio devices:
0: Crystal audio controller (CS4235) (DUPLEX)
Synth devices:
Midi devices:
Timers:
0: System clock
Mixers:
0: Crystal audio controller (CS4235)
According /proc/interupts IRQ 5 is taken by
5: 0 XT-PIC Crystal audio controller
/proc/ioports tells me:
0534-0537 : Crystal audio controller
Quoted 7 lines · Gerd Bavendiek
Alan Cox stated a few weeks ago that there is support for the Crystal soundchip CS4235 in kernel 2.1.132ac1. I have an Acer motherboard with this chip and so decided to make the latest available kernel linux-2.2.0-pre7.
I found no references to CS4235 and so took the closest config option CS4232.
I think you need to enable "config experimental drivers" to enable it.
Quoted 5 lines
Unfortunately
cat
/usr/lib/xemacs-20.4/etc/sounds/im_so_happy.au>/dev/audiosimply gave silence.
What does "cat /dev/sndstat" say?
Cheers
Tony
Quoted 6 lines · moc liamtoh
i have the same chip (aopen MB) and i had problems too, (i use the 2.0.36) but i got it to werk by swapping the dma's so that i had 534, irq 5, dma=1 and dma2=0 and that, oddly enough, seemed to work...and not that bad either...altough i have on board video also and when i was trying to use that it would get very bad sound....
I followed your suggestion.
cat /usr/lib/xemacs-20.4/etc/sounds/im_so_happy.au > /dev/audio works !
Thanks a lot so far.
After plugging a microphone I tried
dd if=/dev/audio of=qqq bs=8k count
Playing back that file just gives silence. Did you try that too ?
Kind regards
Gerd
Quoted 7 lines · Tony Nugent
Quoted 5 lines · Gerd Bavendiek
Alan Cox stated a few weeks ago that there is support for the Crystal soundchip CS4235 in kernel 2.1.132ac1. I have an Acer motherboard with this chip and so decided to make the latest available kernel linux-2.2.0-pre7.
Quoted 5 lines
Quoted 2 lines
I found no references to CS4235 and so took the closest config option CS4232.
I think you need to enable "config experimental drivers" to enable it.
I tried but nothing visible changed in section "sound" or "low level drivers" while doing make menuconfig.
Quoted 8 lines
Quoted 5 lines
Unfortunately
cat
/usr/lib/xemacs-20.4/etc/sounds/im_so_happy.au>/dev/audiosimply gave silence.
What does "cat
/dev/sndstat" say?
Please have a second look on my posting.
Thanks !
Kind regards
Gerd
Hi,
I'm glad that with the help of Moc Liamtoh, who suggested swapping DMA, and Mike Haller, who provided me with a fix to the recent ad1848.c I'm now able to playback and record with my Crystal CS4235 and Linux 2.2.0-pre7.
My defines in .config (those which are not set are not shown) #
# Sound
#CONFIG_SOUND=yCONFIG_SOUND_OSS=yCONFIG_SOUND_PSS=mCONFIG_SOUND_CS4232=yCONFIG_CS4232_BASES4CONFIG_CS4232_IRQ=5CONFIG_CS4232_DMA=1CONFIG_CS4232_DMA2=0
CONFIG_CS4232_MPU_BASE:8CONFIG_CS4232_MPU_IRQ=9
Mike's changes are as follows:
momo:/usr/src/linux/drivers/sound> diff ad1848.c.org ad1848.c 1812c1812,1813
< if (devc->model != MD_1848 && devc->model != MD_C930)
---
Quoted 1 line
if (devc->model != MD_1848 && devc->model != MD_C930 && devc->model !> MD_4235)
Thanks a lot !
Kind regards
Gerd