Skip to contentSkip to conversation

Is there any reason rvplayer5.0 wouldn't work with PPP 2.3.5 and kernel 2.2.1?

DISCUSSION Bill Nottingham 1 participant 1 message Jan 31, 1999 Sound

lore
Share & tools
lore
#0 lore raw
Quoted 7 lines · Miles Lane

I installed RealVideo 5.0 using the file from Real.com. I have a Crystal Audio sound card that esound and xgalaga can produce sound on. I configured rvplayer5.0 to use TCP-only to penetrate my firewall (this works in on the same dial-in using Win98).

Quoted 6 lines

I get an "Error 1" after the rvplayer5.0 fills its initial buffers and then goes to connect to the realaudio server again. "Error 1" means an unspecified error occured. (How helpful)

Any clues out there? Am I overlooking something?

rvplayer doesn't work with Linux 2.2.

From /usr/src/linux/Documentation/Changes:

RealPlayer
=====

Current releases of Real Player 5.0 depend on a bug in the sound
sub-system which is no longer there. Consequently, they don't work. Real is aware of the problem and should have an updated version of the software available shortly. In the mean time, you can always try backing up your copy of rvplayer, and then editing it by:

dd if=/dev/zero of=rvplayer bs=1 count=1 seeke7586 conv=notrunc dd
if=/dev/zero of=rvplayer bs=1 count=1 seekf5986 conv=notrunc

If you're lucky, you'll then have sound....

You may also need to edit it with

dd if=/dev/zero of=rvplayer bs=1 count=1 seekp2554 conv=notrunc

as well. Alternately, download rpopen from
http://onramp.i2k.com/~jeffd/rpopen/ and pre-load it before you run rvplayer (it's a shared object which blocks rvplayer from doing the NONBLOCKing open of /dev/dsp).

Hope that helps!

Bill