Aztech 16-bit in SB mode??
Hi all,
I have a Aztech 16-bit sound card which reports to be SB16 compatible. (In DOS that is, all games etc. use the SB 16 settings after the Aztech sound driver is loaded.).
I have a Redhat 5.0 with kernel 2.0.32, and i tried using sndconfig. The card is not detected at io=0x220 (irq test fails at all irqs). Then I came to know of LOADliN , i boot into dos, initialize the sound driver, use loadlin to go into linux.
and voila, sndconfig does report my sound card and also plays the sample file correctly.
Now my problem is that my sound card is *probably* working in 8-bit mode. (the ioctl SNDCTL_DSPP_SAMPLESIZE returns the value 8 in the argument size, always).
I also tried using a software like vplay (distributed inside sndkit, by Hannu Salovien) but it says the following:
Unable to set 16-bit sample size, playing 8-bit.
If my card is detected correctly as SB16, then why does it play only 8-bit?? Any Clues???
Lokesh
______________________________________________________
Get Your Private, Free Email at http://www.hotmail.com
Hi
I think I may have the same card. (or similar) The sb emulation is only 8 bits. almost all cards which emulate sb only work in 8 bits. You need to use the mss. Try using the sgalaxy driver, it works great for me. I use :
modprobe sgalaxy io=0x530 irq=7 sgbase=0x220 dma=1 dma2=0
Look at your autoexec.bat file, it will probably set galaxy= something.
Quoted 28 lines · lokesh setia
Hi all,
I have a Aztech 16-bit sound card which reports to be SB16 compatible. (In DOS that is, all games etc. use the SB 16 settings after the Aztech sound driver is loaded.).
I have a Redhat 5.0 with kernel 2.0.32, and i tried using sndconfig. The card is not detected at io=0x220 (irq test fails at all irqs). Then I came to know of LOADliN , i boot into dos, initialize the sound driver, use loadlin to go into linux.
and voila, sndconfig does report my sound card and also plays the sample file correctly.Now my problem is that my sound card is *probably* working in 8-bit mode. (the ioctl
SNDCTL_DSPP_SAMPLESIZEreturns the value 8 in the argument size, always).
I also tried using a software like vplay (distributed inside sndkit, by Hannu Salovien) but it says the following:Unable to set 16-bit sample size, playing 8-bit.
If my card is detected correctly as SB16, then why does it play only 8-bit?? Any Clues???
Lokesh
______________________________________________________
Get Your Private, Free Email at http://www.hotmail.com
Signature · 1 line
Robbie Murray
Quoted 7 lines · lokesh setia
Hi all,
I have a Aztech 16-bit sound card which reports to be SB16 compatible. (In DOS that is, all games etc. use the SB 16 settings after the Aztech sound driver is loaded.).
Unless this is some very new card (last few months), there exists no SoundBlaster 16 clones.
I have an Aztech Sound Galaxy PRO 16 card, which I used before getting my genuine SB32, and it was a good card.
Most cards which claim 16-bit sound mode usually use something like MSS/WSS, and have a SoundBlaster PRO mode.
An interesting thing about some of the Aztech's (mine included) is that they ran both 16 and 8-bit modes at once...(at least the DOS-sided driver did, I could never get it to work this way under Linux, had to be one or the other).
If it has an EEPROM / software jumper, set it for EEPROM and make sure the correct values are in memory, and then you won't need to use LOADLIN, just boot it straight to Linux.
--------------------------------------------------------------------------
* * * Atari 8-bit RULES! 400/800/XL/XE 2600/5200/7800
* * * Battlestar: Galactica! Star Wars! SeaQuest!
* * * Voltron! DESCENT! Star Trek! SPARCstation 2! * * * * *
** * ** ! ! ! ! L I N U X ! ! ! ! 2.2.1
--------------------------------------------------------------------------
Hi,
Quoted 1 line
I think I may have the same card. (or similar) The sb emulation is only
8
Quoted 1 line
bits. almost all cards which emulate sb only work in 8 bits. You need
to
Quoted 1 line
use the mss. Try using the sgalaxy driver, it works great for me. I use
:
Quoted 4 lines
modprobe sgalaxy io=0x530 irq=7 sgbase=0x220 dma=1 dma2=0
Look at your autoexec.bat file, it will probably set galaxy= something.
Thanks for that, but i could'nt get it to work ;-(
I'm sure i have almost the same card as you have. (Aztech 16-bit Sound galaxy pro),
It is compatible with both sb16 and mwss. and sets galaxy=foo in autoexec.bat.
Here's my problem now:
First of all, this module (sgalaxy.o) isnt there in 2.0.32. So i upgraded it to 2.0.36. then i removed everything from /etc/conf.modules and restarted the computer. Here are some results i got.
bash# lsmod
bash# modprobe sgalaxy io=0x530 irq sgbase=0x220 dma=1 dma2=0 /lib/modules/2.0.36/misc/sgalaxy.o: device or resource busy
sound: device or resource busy.
bash# lsmod
ad1848 blah blah
soundlow blah blah
soundcore blah blah
sound blah blah
bash# rmmod ad1848; rmmod soundlow; rmmod sound; bash# lsmod
soundcore (used by 0)
bash# rmmod soundcore
soundcore: device or resource busy.
You get it? i remove all instances and the sound is certainly not being used still i cant remove soundcore. and yes i have tried different irq's (5, 7 , 9 and 11) and io=0x530 (as in dos) but all i get is device or resource busy.
Infact, i get this device or resource busy on trying to load any sound module (pss.o, sgalaxy.o or whatever).
Did you need to recompile the kernel to get your sound card working? Also, in my DOS setting there is no option for mwss irq no.. I heard that irq is the default, but isn't it used by the display.
Thanks anyway.
Lokesh
Quoted 4 lines · lokesh setia
Quoted 3 lines
Hi all,
I have a Aztech 16-bit sound card which reports to be SB16
compatible.
Quoted 1 line
Quoted 1 line
(In DOS that is, all games etc. use the SB 16 settings after the
Aztech
Quoted 4 lines
Quoted 4 lines
sound driver is loaded.).
I have a Redhat 5.0 with kernel 2.0.32, and i tried using sndconfig. The card is not detected at io=0x220 (irq test fails at all irqs). Then I came to know of LOADliN , i boot into dos, initialize the
sound
Quoted 2 lines
Quoted 2 lines
driver, use loadlin to go into linux.
and voila, sndconfig does report my sound card and also plays the
sample
Quoted 6 lines
Quoted 6 lines
file correctly.
Now my problem is that my sound card is *probably* working in 8-bit mode. (the ioctl
SNDCTL_DSPP_SAMPLESIZEreturns the value 8 in the argument size, always).
I also tried using a software like vplay (distributed inside sndkit,
by
Quoted 4 lines
Quoted 4 lines
Hannu Salovien) but it says the following:
Unable to set 16-bit sample size, playing 8-bit.
Quoted 13 lines
Quoted 8 lines
If my card is detected correctly as SB16, then why does it play only 8-bit?? Any Clues???
Lokesh
______________________________________________________
Get Your Private, Free Email at http://www.hotmail.comSignature · 1 line
Robbie Murray
______________________________________________________
Get Your Private, Free Email at http://www.hotmail.com