awe64 not initializing on 2.2.2
I'm having quite a runaround with getting my awe64 to work with a 2.2.2 kernel. This is what I get when I run modprobe:
/lib/modules/2.2.2/misc/sb.o: init_module: Device or resource busy
if a cat my /dev/sndstat, there's no installed driver, no config
options, nada.
I upgraded everything that I needed to upgrade in the Changes file
for the kernel, making sure that my modutils was properly installed. Insmod -V returns the correct version number (2.1.121) I'm at my wit's end.
Thanx in advance
- E
Signature · 9 lines
__________________________________ Eric A. Tork "The Man Behind the Machine" Network Technician, Central Community College Hastings, Ne. (402) 461-2576 "The only thing we learn from history is that we don't learn from history" ___________________________________
this message has occured to me in the past due to inaccurate or insufficient options to the module.
are you specifying io, irq, dma, etc?
ie "modprobe sb io=0x220 irq=5 dma=1 dma16=5" or whatever... if so do these match up with the card's config? sounds like a pci card, right? does it appear in /proc/pci?
-cc
Quoted 26 lines · Eric Tork
I'm having quite a runaround with getting my awe64 to work with a 2.2.2 kernel. This is what I get when I run modprobe:
/lib/modules/2.2.2/misc/sb.o:init_module: Device or resource busyif a cat my
/dev/sndstat, there's no installed driver, no config
options, nada.I upgraded everything that I needed to upgrade in the Changes file
for the kernel, making sure that my modutils was properly installed. Insmod -V returns the correct version number (2.1.121) I'm at my wit's end.Thanx in advance
- ESignature · 9 lines
__________________________________ Eric A. Tork "The Man Behind the Machine" Network Technician, Central Community College Hastings, Ne. (402) 461-2576 "The only thing we learn from history is that we don't learn from history" ___________________________________
Some .WAV files (most notably any that were introduced in the Windows 95 era) don't play at all-- they're just garble.
And many, if they're not garble, they play at 1/2 the speed of normal playback. Solution: Get a program that supports these files.
I'm not sure where to look, but I'm sure that Freshmeat wouldn't be a bad place to start.
- Mike
--------------------------------------------------------------------------
Michael B. Trausch [email protected]
http://www.wcnet.org/~mtrausch 100% Microsoft Free on a PC!
--------------------------------------------------------------------------
On Sun, 14 Mar 1999, Eric Tork wrote:
ET>Date: Sun, 14 Mar 1999 13:44:37 -0800
ET>From: Eric Tork <[email protected]>
ET>To: [email protected]
ET>Subject: Re: awe64 not initializing on 2.2.2
ET>
ET>As luck would have it, that did the trick. The module loads, and all ET>is fine.......but one problem remains. /dev/audio outputs garble when I ET>send something to it, like a wav file. KDE's systems sounds all come ET>through clear, so I assume that it sends its output through something ET>else? Is there something that needs to be done with /dev/audio? ET>
ET> btw, this is a redhat 5.1 box with an isa pnp soundblaster 64. ET>
ET>Cornelius Creedon wrote:
ET>>
ET>> this message has occured to me in the past due to inaccurate or ET>> insufficient options to the module.
ET>> are you specifying io, irq, dma, etc?
ET>> ie "modprobe sb io=0x220 irq=5 dma=1 dma16=5" or whatever... ET>> if so do these match up with the card's config?
ET>> sounds like a pci card, right? does it appear in /proc/pci? ET>>
ET>> -cc
ET>>
ET>> On Sun, 14 Mar 1999, Eric Tork wrote:
ET>>
ET>> > I'm having quite a runaround with getting my awe64 to work with a ET>> > 2.2.2 kernel. This is what I get when I run modprobe:
ET>> >
ET>> > /lib/modules/2.2.2/misc/sb.o: init_module: Device or resource busy
ET>> >
ET>> > if a cat my /dev/sndstat, there's no installed driver, no config
ET>> > options, nada.
ET>> >
ET>> > I upgraded everything that I needed to upgrade in the Changes file
ET>> > for the kernel, making sure that my modutils was properly installed. ET>> > Insmod -V returns the correct version number (2.1.121) I'm at my wit's ET>> > end.
ET>> >
ET>> > Thanx in advance
ET>> > - E
ET>> > --
ET>> > __________________________________
ET>> > Eric A. Tork
ET>> > "The Man Behind the Machine"
ET>> > Network Technician, Central Community College
ET>> > Hastings, Ne. (402) 461-2576
ET>> >
ET>> > "The only thing we learn from history
ET>> > is that we don't learn from history"
ET>> > ___________________________________
ET>> >
ET>
ET>--
ET>__________________________________
ET>Eric A. Tork
ET>"The Man Behind the Machine"
ET>Network Technician, Central Community College
ET>Hastings, Ne. (402) 461-2576
ET>
ET>"The only thing we learn from history
ET>is that we don't learn from history" ET>___________________________________
ET>
Quoted 8 lines · Eric Tork
As luck would have it, that did the trick. The module loads, and all is fine.......but one problem remains.
/dev/audiooutputs garble when I send something to it, like a wav file. KDE's systems sounds all come through clear, so I assume that it sends its output through something else? Is there something that needs to be done with/dev/audio?btw, this is a redhat 5.1 box with an isa pnp soundblaster 64.
/dev/audio is for Sun .au format files only.
To play .wav files you must use a player such as the one that comes with SoX or wavplay. Have a look at:
http://www.bright.net/~dlphilp/linux_soundapps.html
These players all use /dev/dsp for outputing audio.
Hope this helps,
Erik
Signature · 5 lines
+-------------------------------------------------+
Erik de Castro Lopo [email protected]
+-------------------------------------------------+
The difference between a violin and a viola is that a viola
burns longer.Quoted 1 line · Erik de Castro Lopo
/dev/audiois for Sun .au format files only.
Actually /dev/audio doesn't know anything about .au format. Most (older) .au files just happen to be recorded using the right format (because it was the only format possible with oldest Sparc machines). However there are lot of .au files that don't play properly when catting them to /dev/audio.
So the proper solution for .au files too is using a player program that understand the format.
Best regards,
Hannu
-----
Hannu Savolainen ([email protected])
http://www.opensound.com (Open Sound System (OSS))
http://www.opensound.com/ossfree (OSS/Free)
As luck would have it, that did the trick. The module loads, and all is fine.......but one problem remains. /dev/audio outputs garble when I send something to it, like a wav file. KDE's systems sounds all come through clear, so I assume that it sends its output through something else? Is there something that needs to be done with /dev/audio?
btw, this is a redhat 5.1 box with an isa pnp soundblaster 64.
Quoted 38 lines · Cornelius Creedon
this message has occured to me in the past due to inaccurate or insufficient options to the module.
are you specifying io, irq, dma, etc?
ie "modprobe sb io=0x220 irq=5 dma=1 dma16=5" or whatever... if so do these match up with the card's config? sounds like a pci card, right? does it appear in/proc/pci?-cc
Quoted 26 lines · Eric Tork
I'm having quite a runaround with getting my awe64 to work with a 2.2.2 kernel. This is what I get when I run modprobe:
/lib/modules/2.2.2/misc/sb.o:init_module: Device or resource busyif a cat my
/dev/sndstat, there's no installed driver, no config
options, nada.I upgraded everything that I needed to upgrade in the Changes file
for the kernel, making sure that my modutils was properly installed. Insmod -V returns the correct version number (2.1.121) I'm at my wit's end.Thanx in advance
- E
--
__________________________________
Eric A. Tork
"The Man Behind the Machine"
Network Technician, Central Community College
Hastings, Ne. (402) 461-2576"The only thing we learn from history
is that we don't learn from history"
___________________________________
Signature · 9 lines
__________________________________ Eric A. Tork "The Man Behind the Machine" Network Technician, Central Community College Hastings, Ne. (402) 461-2576 "The only thing we learn from history is that we don't learn from history" ___________________________________
yeah. as was just mentioned, only some formats happen to output correctly when cat-ed to /dev/audio, for others use an approperiate software tool. ie for .wav-s try 'play' for midi 'playmidi'
and i am sure there are many others...
-cc
Quoted 33 lines · Eric Tork
As luck would have it, that did the trick. The module loads, and all is fine.......but one problem remains.
/dev/audiooutputs garble when I send something to it, like a wav file. KDE's systems sounds all come through clear, so I assume that it sends its output through something else? Is there something that needs to be done with/dev/audio?btw, this is a redhat 5.1 box with an isa pnp soundblaster 64.
Quoted 24 lines · Cornelius Creedon
this message has occured to me in the past due to inaccurate or insufficient options to the module.
are you specifying io, irq, dma, etc?
ie "modprobe sb io=0x220 irq=5 dma=1 dma16=5" or whatever... if so do these match up with the card's config? sounds like a pci card, right? does it appear in/proc/pci?-cc
Quoted 12 lines · Eric Tork
I'm having quite a runaround with getting my awe64 to work with a 2.2.2 kernel. This is what I get when I run modprobe:
/lib/modules/2.2.2/misc/sb.o:init_module: Device or resource busyif a cat my
/dev/sndstat, there's no installed driver, no config
options, nada.I upgraded everything that I needed to upgrade in the Changes file
for the kernel, making sure that my modutils was properly installed. Insmod -V returns the correct version number (2.1.121) I'm at my wit's end.