SB16 pnp
I have problem with configuring my Sound Card with kernel 2.0.30.
My sound card is Sound Blaster 16, I am not very sure wheter the sound card is plug & play or not. But I install it in Windows'95 it shows SB16 PnP.
So I use isapnptools v1.17 and config
% isapnp /etc/isapnp.conf
Board 1 has Identity d7 00 00 15 f5 24 00 8c 0e: CTL0024 Serial No 5621 [checksum d7]
CTL0024/5621[0]{Audio }: Ports 0x220 0x330 0x388; IRQ5 DMA1 DMA5 --- Enabled OK
% lsmod
Module: #pages: Used by:
sound 10 0
ppp 5 0 slip 2 0 slhc 2 [ppp slip] 0 lp 2 0
BUT
% cat /dev/sndstat
Sound Driver:3.5.4-960630 (Tue Mar 2 05:22:12 SGT 1999 root,
Config options: 0
Installed drivers:
Card config:
Audio devices:
Synth devices: NOT ENABLED IN CONFIG
Midi devices: NOT ENABLED IN CONFIG
Timers:
Mixers:
So I can't use the device, what is going wrong?
You have to edit /etc/isapnp.conf to include these lines-
(IO 1 (BASE 0x0A20))
(IO 2 (BASE 0x0E20))
read the soundblaster mini- HOW TO at ftp:metalab.unc.edu/pub/Linux/docs/HOWTO/unmaintained/mini/Soundblaster-16 it explains it fully-
have fun !!!
LP
Quoted 8 lines · chin hooi chee
Board 1 has Identity d7 00 00 15 f5 24 00 8c 0e: CTL0024 Serial No 5621 [checksum d7]
CTL0024/5621[0]{Audio }: Ports0x2200x3300x388; IRQ5 DMA1 DMA5 --- Enabled OK% lsmod
BUT
% cat/dev/sndstatSound Driver:3.5.4-960630 (Tue Mar 2 05:22:12 SGT 1999 root,
You need to run isapnp *before* loading the module. Also, since you're using an older driver, what settings did you compile into the kernel for the module?
Bill