Skip to contentSkip to conversation

"device busy"

DISCUSSION Buffy 2 participants 2 messages May 19, 1999 – May 23, 1999 Sound

lore
Share & tools
lore

Buffy

author
#0 lore raw

Hi all :

I'm still working about my AWE64 Gold configuration... Someone
([email protected]) helped me a lot but can't anymore for this time.

I've compiled my kernel with modules required, built a isapnp.conf file with two others cards (that I don't need), made all configured. I made the devices, (dspW and dspW1), the others were already existing. But at boot time :

Soundblaster audio driver Copyright (C) by Hannu Savolainen 1993-1996
sb: dsp reset failed.
/lib/modules/2.2.9/misc/sb.o: init_module: Device or resource busy
sound: Device or resource busy
AWE32: not detected
modprobe: can't locate module synth0
open /dev/sequencer: Device not configured
post-install /lib/modules/2.2.9/misc/awe_wave.o failed

I have a conf.modules too : created automatically it seams,

alias sound sb
options opl3 io=0x388
alias midi awe_wave
post-install awe_wave /usr/bin/sfxload /etc/midi/GU11-ROM.SF2 options sb io=0x220 irq=5 dma=1 dma16=5 mpu_io=0x330

I don't understand what to do ! :)

\-=-=-=-=-=-=-=-=-=-/

| * * B-U-F-F-Y * * |
| +33 6.15.11.88.94 |

/-=-=-=-=-=-=-=-=-=-\

#1 lore raw
Quoted 1 line · Buffy

I've compiled my kernel with modules required, built a isapnp.conf file

are you SURE to have configured MODULES and not things to be included IN the kernel ?

Quoted 1 line

But at boot time :

if there are modules... it's after boot time (well, kernel boot time, but we lack of precisions)

Try to execute
isapnp /etc/isapnp.conf, give us what it says, and send to ME (not the list) your isapnp.conf.

Quoted 1 line

I don't understand what to do ! :)

change your nickname, you're a man when s1 call you on your phone :))

--
Arnaud Launay <[email protected]>