Skip to contentSkip to conversation

AWE64 ISA - game port

DISCUSSION Soulier, Frederic 3 participants 3 messages Jun 16, 1999 – Jun 17, 1999 Sound

lore
Share & tools
lore
#0 lore raw

Hi,

A "pnpdump >/etc/isapnp.conf" reports:

   LD0   audio
   LD1   game
   LD2   wave table

Activating the lines for LD0 & LD2 and doing an
"isapnp /etc/isapnp.conf" works fine.

Activating the lines LD0, LD1 & LD2 and doing an "isapnp /etc/isapnp.conf" does not work.
Is there anything wrong with activating the line for the game port?

note: only io=0x200 is given for the game port.

I would like to give a try to the joystick code in Linux so any help would be much appreciated and welcomed.

Ciao
Fred

#1 lore raw

hi!

Check in /proc/interrupts if something else is using port 0x200

Nat

Quoted 11 lines · Frederic

A "pnpdump >/etc/isapnp.conf" reports:

   LD0   audio
   LD1   game
   LD2   wave table

Activating the lines LD0, LD1 & LD2 and doing an "isapnp /etc/isapnp.conf" does not work.
Is there anything wrong with activating the line for the game port?

note: only io=0x200 is given for the game port.

#2 lore raw
In reply to Soulier, Frederic

Natanael,

You probably meant /proc/ioports.

Dennis

Quoted 19 lines · Natanael Copa

hi!

Check in /proc/interrupts if something else is using port 0x200

Nat

Quoted 11 lines · Frederic

A "pnpdump >/etc/isapnp.conf" reports:

   LD0   audio
   LD1   game
   LD2   wave table

Activating the lines LD0, LD1 & LD2 and doing an "isapnp /etc/isapnp.conf" does not work.
Is there anything wrong with activating the line for the game port?

note: only io=0x200 is given for the game port.

--
---------------------------------------------------------------------
Dennis Grow
[email protected]
http://www.primenet.com/~dkgrow
---------------------------------------------------------------------