Skip to contentSkip to conversation

Soundblaster AWE64 question

DISCUSSION Hines, Jim 2 participants 2 messages Jul 8, 1999 Sound

lore
Share & tools
lore

Hines, Jim

author
#0 lore raw

Hello,
I have a SB-AWE64 with registered OSS with mixer and AWE options. The card supports both 8 and 16 bit recording. However, whenever I do issue a cat /proc/dma
I get this return.

1: SoundBlaster8
4: cascade
5: SoundBlaster16
7: aha1542

What is dma 1 used for and why is it set for Soundblaster8 as opposed to 16? I would naturally assume that dma 1 is input while dma 5 is the output. Correct? Someone please explain this to me.

Thanks,
Jim Hines
400mhz AMDk6-2 98mb
RedHat 5.2 (2.0.36)

#1 lore raw
Quoted 7 lines · Jim

Hello,
I have a SB-AWE64 with registered OSS with mixer and AWE options. The card supports both 8 and 16 bit recording. However, whenever I do issue a cat /proc/dma
I get this return.

Quoted 8 lines

1: SoundBlaster8
4: cascade
5: SoundBlaster16
7: aha1542

What is dma 1 used for and why is it set for Soundblaster8 as opposed to 16? I would naturally assume that dma 1 is input while dma 5 is the output. Correct? Someone please explain this to me.

As I understand it, when performing 16bit DMA (input or output) The SoundBlaster series cards use two dma channels. When doing 8bit DMA, it only uses one. It is perfectly normal for your SB card to be hogging two DMA slots.

Quoted 4 lines

Thanks,
Jim Hines
400mhz AMDk6-2 98mb
RedHat 5.2 (2.0.36)

-- ebm

+=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=+
| Eric B. Mitchell          mailto:[email protected] |
+=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=+