Skip to contentSkip to conversation

interrupt conflict with sound and video?

DISCUSSION Peter John Cameron 3 participants 3 messages Oct 21, 1999 – Oct 22, 1999 Sound

lore
Share & tools
lore
#0 lore raw

I've got a voodoo 3000 video card and an integrated Creative SoundBlaster AudioPCI 64V. These work without problems in win98. However, no sound is forthcoming in Linux RH 6.1 (& 6.0) (apart from an odd click here and there).

I've just noticed that win98 reports the voodoo card as having an IRQ of 11. The SoundBlaster also has an IRQ of 11. On the other hand, the legacy sound device has IRQ 7.

In Linux, the voodoo has IRQ 11 and the soundcard (automatically detected as an ensoniq 1371) is also given IRQ 11.

Is this why I get no sound? IRQ 7 is free on my Linux system, so how should I go about changing the sound card's IRQ from 11 to 7? Would such a change affect how sound works in win98? More to the point, would it solve my lack of Linux sound?

Someone suggested moving the PCI cards around in the slots. The sound card is integrated onto the motherboard, so this means I have to physically move the voodoo card? Is this the only solution?

Cheers,
Peter

#1 lore raw
Quoted 4 lines · Peter John Cameron

Is this why I get no sound? IRQ 7 is free on my Linux system, so how should I go about changing the sound card's IRQ from 11 to 7? Would such a change affect how sound works in win98? More to the point, would it solve my lack of Linux sound?

That's probably why. You don't want it to use IRQ 7 unless you have disabled the parallel port in the BIOS. That normally runs on IRQ 7.

As for the Win98 question, I have no personal knowledge as I've never been a Windows user.

It seems to me the larger problem here is a system with so much stuff that you've run out of IRQs. Might I recommend SCSI instead of two IDE chains?

Signature · 4 lines
_Deirdre   *   http://www.linuxcabal.net   *   http://www.deirdre.net
"Mars has been a tough target" -- Peter G. Neumann, Risks Digest Moderator
"That's because the Martians keep shooting things down." -- Harlan Rosenthal
<[email protected]>, retorting in Risks Digest 20.60
#2 lore raw
In reply to Peter John Cameron
Quoted 1 line · Peter John Cameron

I've got a voodoo 3000 video card and an integrated Creative SoundBlaster

Hmm... sounds familiar :)

Quoted 10 lines

AudioPCI 64V. These work without problems in win98. However, no sound is forthcoming in Linux RH 6.1 (& 6.0) (apart from an odd click here and there).

I've just noticed that win98 reports the voodoo card as having an IRQ of 11. The SoundBlaster also has an IRQ of 11. On the other hand, the legacy sound device has IRQ 7.

In Linux, the voodoo has IRQ 11 and the soundcard (automatically detected as an ensoniq 1371) is also given IRQ 11.

I assume that you've done:
cat /proc/interrupts
cat /proc/pci
cat /proc/dma
cat /proc/ioports
and other such things.

PCI cards can happily share the same interrupt, no problem. That's one of the big advantages in going from isa -> pci and what you are seeing is certainly not your problem.

Quoted 1 line

Is this why I get no sound? IRQ 7 is free on my Linux system, so how should

No idea.

Quoted 1 line

I go about changing the sound card's IRQ from 11 to 7? Would such a change

Don't bother. No.

Quoted 2 lines

affect how sound works in win98? More to the point, would it solve my lack of Linux sound?

No, not at all. In fact, it may make things worse if you start trying to manually assign interrupts.

Besides, if I recall correctly, irq7 is (sometimes) used by the parport.

Quoted 3 lines

Someone suggested moving the PCI cards around in the slots. The sound card is integrated onto the motherboard, so this means I have to physically move the voodoo card? Is this the only solution?

Could be worth trying. Make sure that your bios is not doing anything to the IRQs.

I have banshee/v3 systems with esoniq pci sound cards (1370 and 1371 chipsets... for various reasons I actually prefer the 1370). It all works nicely here. (Redhat 5.2, 6.0 and now 6.1).

Cheers
Tony