Where to send dsdt to at HP
Quoted 6 lines · Matthew Harrell
The problems my ACPI table had? Sure, it would neither go into S1 nor allow t he
battery status to be read. Robert Moore, also from Intel, helped with the battery status issues and now that is working fine. I still don't have S1 capability under Linux but I have uploaded the asl table to acpi.sf.net.
Also, if you dump the dsdt and compile it with the intel compiler you see all the same error the Compaq bios tables have. Fixing these errors and recompiling causes the battery status to work (can't say about S1).
this, on an hp zt1260
one thing to note - there are several bios upgrades for the zt1260; the last one (1.05?) slightly improves the dsdt but doesn't address the battery problem.
(the last time I upgraded my backlight failed and it took me a month to figure out it was a hardware problem and not caused by the bios upgrade :-)
-brad
-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf