GRUB boot problem with lvm mirror type raid1

Hi
I want to ask it is possible boot root file system (via GRUB) from LVM RAID1 volume?
I can boot root file system (with /boot) from linera LVM volume and from mirror volume, but when I create raid1 mirror GRUB can't boot from it:

lvconvert --type raid1 -m1 gsys/vsys

LVM mirror is work:
lvconvert -m1 gsys/vsys

I have two disk and use only LVM, not other raid software. GRUB have lvm module. Thanks

Grzesiek

Grub doesn't support LVM RAID1 (it supports only RAID 4/5/6 type IIRC).

However, I don't recommend using /boot on LVM at the moment since grub support for LVM is limited and unofficial. There's a plan to add official and more robust support though - there are ongoing discussions between grub and LVM team...

Peter

----- Mail d'origine -----
De: Peter Rajnoha <[email protected]>
À: [email protected]
Cc: LVM general discussion and development <[email protected]> Envoyé: Mon, 14 Apr 2014 11:40:36 +0200 (CEST)
Objet: Re: [linux-lvm] GRUB boot problem with lvm mirror type raid1

Grub doesn't support LVM RAID1 (it supports only RAID 4/5/6 type IIRC).

However, I don't recommend using /boot on LVM at the moment since grub support for LVM is limited and unofficial. There's a plan to add official and more robust support though - there are ongoing discussions between grub and LVM team...

Peter
Hello !
May I chime in on this ? 
If the raid1 is made OUTSIDE lvm (ie soft raid1 giving /dev/md0 as a PV for LVM) will the Grub be apt to find it and boot ? 
Or is it the same case as above ? 
Thanks.

Grub should support MD RAID 0/1/4/5/6 and 10.

Though there's the same question about its limitations and whether it's not similar to LVM support where we know that an update in metadata format (e.g. adding new items or changing the order of metadata items) can cause grub to not recognize the volume anymore (since grub expects the metadata to be in predefined and static form that doesn't change its layout in future). There may be missing sanity checks too, like CRC checking in case of LVM etc.

I'm not sure about LVM on MD at the moment. It depends on whether grub supports device stacking. If grub supports iterative device/metadata recognition, then yes, it's possible. (CC-ing phcoder to confirm)

Peter