Hifive-U vs 1000baseT
Are there any known issues with ethernet on the Hifive-U connecting to a 1Gb port? I see that the port gets a link, but no traffic at all. When connecting to a 100Mb port it works fine.
Andreas.
Signature · 3 lines
Andreas Schwab, SUSE Labs, schwab at suse.de GPG Key fingerprint = 0196 BAD8 1CE9 1970 F4BE 1748 E4D4 88E3 0EEA B9D7 "And now for something completely different."
It turned out that the Gb port is broken, it works fine on a different Gb port.
Andreas.
Signature · 3 lines
Andreas Schwab, SUSE Labs, schwab at suse.de GPG Key fingerprint = 0196 BAD8 1CE9 1970 F4BE 1748 E4D4 88E3 0EEA B9D7 "And now for something completely different."
Quoted 3 lines · schwab at suse.de
Are there any known issues with ethernet on the Hifive-U connecting to a 1Gb port? I see that the port gets a link, but no traffic at all. When connecting to a 100Mb port it works fine.
That's weird. If anything I'd expect it to be the other way around, with 100Mb ports not working and 1Gb ports working -- it was that way for a while because the link type detection is a bit flaky so we just defaulted to 1Gb.
I just checked all the boards we have out on the lab bench, and assuming I managed to follow through the big tangles of wires correctly everything is at 1Gb. Some early revisions of the boards had a screwed up trace on some of the 1Gb lines that mandated a special cable to un-reverse the pairs, but I don't think any of those made it out of the lab -- if you send me your serial number then I'll double-check.
Have you tried more than one ethernet cable?