Skip to contentSkip to conversation

better support for EV-DO AC8700 800 M usbserial modem ??

DISCUSSION ctuxer 3 participants 3 messages Aug 24, 2008 – Aug 25, 2008

lore
Share & tools
lore

ctuxer

author
#0 lore raw

hi everyone ,

i have been using the EVDO AC8700 modem (usbserial) with kernel 2.6.26.2 , it uses the 'option' module along with the generic usbserial module . Well i am happy for the improved support for the modem handling in the new kernels( like now i don have to modprobe with the vendor and product IDs ) , there is one point specific to this modem which is still not handled , ..... the modem switches between EVDO and CDMA mode when the signal strength is low or when there is a bandwidth overload at the vendor's( the service provider , bsnl in my case ) tower . This switch in the mode is not recognised by the driver and the connection is lost once this switching occurs . I have to restart the wvdial program to reconnect .

But if the modem were in CDMA mode when i connect , then the connection is not lost when the modem switches back from CDMA to EVDO . I really don know enough to understand what is the difference between the two cases or what can be done to improve the support for this usbserial modem , ... can anyone help ?

Thanks in advance

Satish

Signature · 1 line
Using Opera's revolutionary e-mail client: http://www.opera.com/mail/
#1 lore raw
Quoted 13 lines · ctuxer

hi everyone ,

i have been using the EVDO AC8700 modem (usbserial) with kernel 2.6.26.2 , it uses the 'option' module along with the generic usbserial module . Well i am happy for the improved support for the modem handling in the new kernels( like now i don have to modprobe with the vendor and product IDs ) , there is one point specific to this modem which is still not handled , ..... the modem switches between EVDO and CDMA mode when the signal strength is low or when there is a bandwidth overload at the vendor's( the service provider , bsnl in my case ) tower . This switch in the mode is not recognised by the driver and the connection is lost once this switching occurs . I have to restart the wvdial program to reconnect .

Quoted 5 lines

But if the modem were in CDMA mode when i connect , then the connection is not lost when the modem switches back from CDMA to EVDO . I really don know enough to understand what is the difference between the two cases or what can be done to improve the support for this usbserial modem , ... can anyone help ?

This looks like something the userspace side has to handle, the option driver is just a dumb "pass-through" type driver, it doesn't really control the modem at all. The "control" channel on the modem allows this to happen, a userspace program drives this.

good luck,

greg k-h

#2 lore raw
Quoted 20 lines · Greg KH
Quoted 13 lines · ctuxer

hi everyone ,

i have been using the EVDO AC8700 modem (usbserial) with kernel 2.6.26.2 , it uses the 'option' module along with the generic usbserial module . Well i am happy for the improved support for the modem handling in the new kernels( like now i don have to modprobe with the vendor and product IDs ) , there is one point specific to this modem which is still not handled , ..... the modem switches between EVDO and CDMA mode when the signal strength is low or when there is a bandwidth overload at the vendor's( the service provider , bsnl in my case ) tower . This switch in the mode is not recognised by the driver and the connection is lost once this switching occurs . I have to restart the wvdial program to reconnect .

Quoted 5 lines

But if the modem were in CDMA mode when i connect , then the connection is not lost when the modem switches back from CDMA to EVDO . I really don know enough to understand what is the difference between the two cases or what can be done to improve the support for this usbserial modem , ... can anyone help ?

Quoted 7 lines

This looks like something the userspace side has to handle, the option driver is just a dumb "pass-through" type driver, it doesn't really control the modem at all. The "control" channel on the modem allows this to happen, a userspace program drives this.

good luck,

I am using the same EVDO modem, but using KPPP as dialer and using option module(also tried airprime module after adding the vendor and product ids ). I am not facing this. issue. Connection is fine when switching occurs. I can see that whenever modem light turns from GREEN(EVDO) to Orange(CDMA 1x RTT) or back , only the data rate is changing but the conenction is fine. Please check with KPPP dialer and enable the option "Auto reconnect".

Regards,
Umesh