Hi everyone,

I'm almost hanging myself.. it's been a week trying without success :-( Maybe someone here could help me out. Sorry for the disturbance !

I have bought a USB FLASH MEMORY device from Kmit Co. The model is : "Unity ITS". I bought it from FRY's Electronics in Palo Alto, CA (USA)
It works perfectly with windows, but i'm having problems with linux 2.4.20- 9 kernel.

It detects the existance of the USB FLASH MEMORY device, as of my /proc/bus/usb/device file says :

C:* #Ifs= 2 Cfg#= 1 Atr=a0 MxPwr= 98mA

I:  If#= 0 Alt= 0 #EPs= 1 Cls=03(HID  ) Sub=01 Prot=01 Driver=hid
E:  Ad=81(I) Atr=03(Int.) MxPS=   8 Ivl=10ms
I:  If#= 1 Alt= 0 #EPs= 1 Cls=03(HID  ) Sub=01 Prot=02 Driver=hid
E:  Ad=82(I) Atr=03(Int.) MxPS=   8 Ivl=10ms
T:  Bus=02 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#=  4 Spd=12  MxCh= 0
D:  Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=16 #Cfgs=  1
P:  Vendor=09a6 ProdID=8001 Rev= 1.00
S:  Manufacturer=KMIT CO.,LTD
S:  Product=KM USB Removable Disk
S:  SerialNumber=20021226113657-00

At the /proc/scsi/usb-storage-0/0 file I get :

Host scsi0: usb-storage
Vendor: KMIT CO.,LTD
Product: KM USB Removable Disk
Serial Number: 20021226113657-00

    Protocol: 8070i
   Transport: Bulk
        GUID: 09a68001002122fffffff600
    Attached: Yes

In /etc/mtab :

usbdevfs on /proc/bus/usb type usbdevfs (rw)

But I can't see it mounted anywhere in my system, nor can I mount it by hand since I don't know the device filename (/dev/?) .

I believe it works the same way for every flash memory drive.

if someone have already suffered of the same cause, I thank for the help :)
Mauricio Oliveira Carneiro

The device is the next available scsi, e.g.:
mount /dev/sda1 /mnt

My /etc/fstab has this:

# USB camera as mass-storage, Nikon Coolpix 2000
#

none               /proc/bus/usb        usbdevfs  noauto          0 0
/dev/sda1          /nikon               msdos     noauto          0 0

--
Eyal Lebedinsky ([email protected]) <http://samba.org/eyal/>

Have you read the Linux USB Guide at http://www.linux-usb.org/ ?

If you still have questions/problems after reading that, try asking this on the linux-usb-users mailing list. The people there can help you out.

thanks,

greg k-h