Skip to contentSkip to conversation

automatic bnep0 configuration

Bluez-users Christoph Torens 4 participants 4 messages Sep 22, 2004 – Sep 23, 2004 2 messages not in the archive Bluetooth drivers

lore
Share & tools
lore

Christoph Torens

author
#0 lore raw

Hello List,

I wonder if there is a way to automatically set up and configure the bnep0 device that comes into existing after a pand connection was set up. At the moment I create the connection and do 'ifconfig bnep0 10.10.0.5'. But when setting up something like a server you normally can't do this ifconfig by hand.

I tried to configure this with /etc/network/interfaces but that didn't help. I also tried to set 'auto bnep0' but this only works at boot time, when the device is not there yet.
What's the trick?

By the way: thanks for all the previous help, already :-)

Signature · 13 lines
Regards,
Christoph


-------------------------------------------------------
This SF.Net email is sponsored by: YOU BE THE JUDGE. Be one of 170
Project Admins to receive an Apple iPod Mini FREE for your judgement on
who ports your project to Linux PPC the best. Sponsored by IBM.
Deadline: Sept. 24. Go here: http://sf.net/ppc_contest.php
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users
#1 lore raw

Hello,

Quoted 5 lines

I tried to configure this with /etc/network/interfaces but that didn't help. I also tried to set 'auto bnep0' but this only works at boot time, when the device is not there yet.
What's the trick?

This is done automatically by hotplug feature in kernel. I was problems, that hotplug scripts was for kernel 2.4 and they doesn't correctly work with 2.6 kernel.

I have enabled "DEBUG=yes export DEBUG"
in /etc/hotplug.d/default/default.hotplug in Mandrake10.0 distribution.

Look at mailing list archive, because this was here discussed before few months.

Best regards,

Pavel Ruzicka

-------------------------------------------------------
This SF.Net email is sponsored by: YOU BE THE JUDGE. Be one of 170 Project Admins to receive an Apple iPod Mini FREE for your judgement on who ports your project to Linux PPC the best. Sponsored by IBM.
Deadline: Sept. 24. Go here: http://sf.net/ppc_contest.php
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users

#2 lore raw
In reply to Christoph Torens
Quoted 9 lines · Christoph Torens

Hello List,

I wonder if there is a way to automatically set up and configure the bnep0 device that comes into existing after a pand connection was set up. At the moment I create the connection and do 'ifconfig bnep0 10.10.0.5'. But when setting up something like a server you normally can't do this ifconfig by hand.

Quoted 7 lines

I tried to configure this with /etc/network/interfaces but that didn't help. I also tried to set 'auto bnep0' but this only works at boot time, when the device is not there yet.
What's the trick?

By the way: thanks for all the previous help, already :-)

When a pand connection is established, /etc/bluetooth/pan/dev-up is executed,
passing args "interface baddr" (for example /etc/bluetooth/pan/dev-up bnep0 00:10:60:A2:3A:0B) . These are the scripts I use, you may find them usefull. On the client side:

fiam@americana 100% ~ $ cat /etc/bluetooth/pan/dev-up #!/bin/bash

if [ "$2" = "00:10:60:A2:3A:0B" ]
then

        ifconfig $1 192.168.3.2
        if ! ifconfig | egrep "eth0|wlan0"
        then
                route add default gw 192.168.3.1
        fi

else
mesg y
echo "Pand connection to $2" | write fiam
mesg n
fi

And on the server side:

fiam@ignition fiam $ cat /etc/bluetooth/pan/dev-up #!/bin/bash

PAN_IFACE=pan0

if [ -z "$1" ]
then
exit 1
fi

if ! ifconfig -a |grep ${PAN_IFACE} &> /dev/null
then

        brctl addbr ${PAN_IFACE}
        brctl setfd ${PAN_IFACE} 0
        brctl stp ${PAN_IFACE} disable
        ifconfig ${PAN_IFACE} 192.168.3.1

fi

if ! iptables -t nat -L -v | \
egrep "REDIRECT( )*tcp( )*--( )*${PAN_IFACE}
( )*any( )*anywhere( )*!192.168.232.0/24
( )*tcp( )*dpt:www( )*redir( )*ports( )*3128"
then

        iptables -t nat -A PREROUTING -i ${PAN_IFACE} -p tcp -d !

192.168.3.0/24 --dport 80 -j REDIRECT --to-port 3128 fi

brctl addif ${PAN_IFACE} $1
ifconfig $1 0.0.0.0

Sorry for the ausence of comments, but I wrote these scripts yesterday and I
hadn't time to comment them. If you need further explanations, just ask :)

Regards,
Alberto

Signature · 1 line
/* Alberto García Hierro (Skyhusker) */
#5 lore raw
In reply to a message not in the archive

Okay, sorry: wrong mail client configuration :)

Alberto Garcia Hierro a =E9crit :

Quoted 2 lines

El Jueves, 23 de Septiembre de 2004 10:42, escribi=F3:
=20

---- beginning of my answer

Quoted 1 line
Quoted 1 line

There is some pand howto, on the net. Basically, you should use bridgin=

g

Quoted 2 lines
Quoted 2 lines

so that all the peer to peer connections seem to come from the same interface.

---- end of my answer

Quoted 3 lines

=20
=20
Please, reply to the list, not to me. I'm not the person who asked for=

help.

Quoted 4 lines

=20
Regards,
Alberto
=20

--=20 "http://www.gnu.org/philosophy/no-word-attachments.fr.html"

Gab

"Il faut agir en homme de pensee et
penser en homme d'action."
- Henri Bergson -

-------------------------------------------------------
This SF.Net email is sponsored by: YOU BE THE JUDGE. Be one of 170 Project Admins to receive an Apple iPod Mini FREE for your judgement on who ports your project to Linux PPC the best. Sponsored by IBM.
Deadline: Sept. 24. Go here: http://sf.net/ppc_contest.php
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users