espressobin u-boot firmware
Hello,
I am trying to follow this thread:
https://www.mail-archive.com/u-boot at lists.denx.de/msg257116.html to boot espressobin from SATA device.
Currently, the only thing what I see when try to boot is the following:
TIM-1.0
After some time, I see > from UART bootloader.
How could I figure out what I did wrong?
SATA image from here:
http://wiki.espressobin.net/tiki-index.php?page=Boot+ESPRESSObin+from+SATA+drive
doesn't even print "TIM-1.0" for me
12.11.2017 13:36, Matwey V. Kornilov пишет:
Quoted 19 lines
Hello,
I am trying to follow this thread:
https://www.mail-archive.com/u-boot at lists.denx.de/msg257116.html to boot espressobin from SATA device.Currently, the only thing what I see when try to boot is the following:
TIM-1.0
After some time, I see > from UART bootloader.
How could I figure out what I did wrong?
_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
https://lists.denx.de/listinfo/u-boot
When I use ATF tools from armada-17.08 release everything builds and boots fine. armaba-17.10 seems to be broken(?)
12.11.2017 14:07, Matwey V. Kornilov пишет:
Quoted 34 lines
SATA image from here:
http://wiki.espressobin.net/tiki-index.php?page=Boot+ESPRESSObin+from+SATA+drive
doesn't even print "TIM-1.0" for me
12.11.2017 13:36, Matwey V. Kornilov пишет:
Quoted 10 lines
Hello,
I am trying to follow this thread:
https://www.mail-archive.com/u-boot at lists.denx.de/msg257116.html to boot espressobin from SATA device.Currently, the only thing what I see when try to boot is the following:
TIM-1.0
Quoted 9 lines
After some time, I see > from UART bootloader.
How could I figure out what I did wrong?
_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
https://lists.denx.de/listinfo/u-boot_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
https://lists.denx.de/listinfo/u-boot