Skip to contentSkip to conversation

CPU frequency scaling (governor) issue (acpi-cpufreq)

DISCUSSION U.Mutlu 1 participant 1 message Jan 7, 2018

lore
Share & tools
lore

U.Mutlu

author
#0 lore raw

Hi folks,

on my old laptop I've a quadcore 2.5 GHz CPU, but the max freq the governor switches to goes only up to 2.1 GHz (at idle it's 1.4 GHz):

cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_available_frequencies 2500000 2100000 1800000 1400000

cat /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq 2100000

cat /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_max_freq 2500000

cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor ondemand

cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_driver acpi-cpufreq

I stress-tested it with a dummy C-program, but as said it never goes above 2.1 GHz.

Is this a kernel issue, or is it something else? (Btw, I don't use any external program to manage this, so I assume it's managed by the kernel).

I would like keep the "ondemand", but it of course should also use the max_freq when needed.

Kernel: 4.12.0

Thx
U.Mutlu