DIF fixes
PATCH 1/1 DIF fixes
This series contains fixes for issuing DIF/DIX commands.
Signature · 1 line
Martin K. Petersen Oracle Linux Engineering
PATCH 1/1 sd: Issue correct protection operation
Use the same logic to prepare RD/WRPROTECT and the protection operation. Fixes a corner case where we could issue an unprotected CDB and yet tell the HBA to do DIF to the drive.
---
1 file changed, 4 insertions(+), 3 deletions(-)
drivers/scsi/sd.c | 7 ++++---
drivers/scsi/sd.c +4 -3
@@ -378,7 +378,7 @@ static int sd_prep_fn(struct request_quesector_t threshold;unsigned int this_count = rq->nr_sectors;unsigned int timeout = sdp->timeout; -int ret; +int ret, host_dif;if (rq->cmd_type ==REQ_TYPE_BLOCK_PC ) { ret =scsi_setup_blk_pc_cmnd (sdp, rq);
@@ -509,7 +509,8 @@ static int sd_prep_fn(struct request_que rq->nr_sectors));/* Set RDPROTECT/WRPROTECT if disk is formatted with DIF */ -if (scsi_host_dif_capable (sdp->host, sdkp->protection_type)) + host_dif =scsi_host_dif_capable (sdp->host, sdkp->protection_type); +if (host_dif) SCpnt->cmnd[1 ] =1 <<5 ;else SCpnt->cmnd[1 ] =0 ;
@@ -567,7 +568,7 @@ static int sd_prep_fn(struct request_que SCpnt->sdb.length = this_count * sdp->sector_size;/* If DIF or DIX is enabled, tell HBA how to handle request */ -if (sdkp->protection_type ||scsi_prot_sg_count (SCpnt)) +if (host_dif ||scsi_prot_sg_count (SCpnt))sd_dif_op (SCpnt, sdkp->protection_type,scsi_prot_sg_count (SCpnt));/*
PATCH 1/1 sd: Always print actual protection_type
In reply to Martin K. PetersenNow that we no longer use protection_type as trigger for preparing protected CDBs we can remove the places that set it to zero. This allows userland to see which protection type the device is formatted with regardless of whether the HBA supports DIF or not.
---
2 files changed, 2 insertions(+), 6 deletions(-) drivers/scsi/sd.c | 7 ++----- drivers/scsi/sd_dif.c | 1 -
drivers/scsi/sd.c +2 -5
@@ -1248,14 +1248,12 @@ void sd_read_protection_type(struct scsielse type = ((buffer[12 ] >>1 ) &7 ) +1 ;/* P_TYPE 0 = Type 1 */ + sdkp->protection_type = type; +switch (type) {case SD_DIF_TYPE0_PROTECTION : - sdkp->protection_type =0 ; -break ; -case SD_DIF_TYPE1_PROTECTION :case SD_DIF_TYPE3_PROTECTION : - sdkp->protection_type = type;break ;case SD_DIF_TYPE2_PROTECTION :
@@ -1273,7 +1271,6 @@ void sd_read_protection_type(struct scsireturn ; disable: - sdkp->protection_type =0 ; sdkp->capacity =0 ; }
drivers/scsi/sd_dif.c +0 -1
@@ -321,7 +321,6 @@ void sd_dif_config_host(struct scsi_diskif (scsi_host_dif_capable (sdp->host, type) ==0 ) {sd_printk (KERN_INFO , sdkp,"Type %d protection " \"unsupported by HBA. Disabling DIF.\n" , type); - sdkp->protection_type =0 ;return ; }
PATCH 1/1 sd: Correctly handle all combinations of DIF and DIX
In reply to Martin K. PetersenThe old detection code couldn't handle all possible combinations of DIX and DIF. This version does, giving priority to DIX if the controller is capable.
---
3 files changed, 23 insertions(+), 19 deletions(-) drivers/scsi/sd.c | 3 ++- drivers/scsi/sd.h | 2 +- drivers/scsi/sd_dif.c | 37 ++++++++++++++++++++-----------------
drivers/scsi/sd.c +2 -1
@@ -569,7 +569,8 @@ static int sd_prep_fn(struct request_que/* If DIF or DIX is enabled, tell HBA how to handle request */ if (host_dif ||scsi_prot_sg_count (SCpnt)) -sd_dif_op (SCpnt, sdkp->protection_type,scsi_prot_sg_count (SCpnt)); +sd_dif_op (SCpnt, host_dif,scsi_prot_sg_count (SCpnt), + sdkp->protection_type);/* * We shouldn't disconnect in the middle of a sector, so with a dumb
drivers/scsi/sd.h +1 -1
@@ -99,7 +99,7 @@ struct sd_dif_tuple {#if defined(CONFIG_BLK_DEV_INTEGRITY ) -extern void sd_dif_op (struct scsi_cmnd *,unsigned int ,unsigned int ); +extern void sd_dif_op (struct scsi_cmnd *,unsigned int ,unsigned int ,unsigned int );extern void sd_dif_config_host (struct scsi_disk *);extern int sd_dif_prepare (struct request *rq,sector_t ,unsigned int );extern void sd_dif_complete (struct scsi_cmnd *,unsigned int );
drivers/scsi/sd_dif.c +20 -17
@@ -311,24 +311,26 @@ void sd_dif_config_host(struct scsi_diskstruct scsi_device *sdp = sdkp->device;struct gendisk *disk = sdkp->disk;u8 type = sdkp->protection_type; +int dif, dix; -/* If this HBA doesn't support DIX, resort to normal I/O or DIF */ -if (scsi_host_dix_capable (sdp->host, type) ==0 ) { + dif =scsi_host_dif_capable (sdp->host, type); + dix =scsi_host_dix_capable (sdp->host, type); -if (type ==SD_DIF_TYPE0_PROTECTION ) -return ; +if (!dix &&scsi_host_dix_capable (sdp->host,0 )) { + dif =0 ; dix =1 ; + } -if (scsi_host_dif_capable (sdp->host, type) ==0 ) { -sd_printk (KERN_INFO , sdkp,"Type %d protection " \ -"unsupported by HBA. Disabling DIF.\n" , type); -return ; - } +if (type) { +if (dif) +sd_printk (KERN_INFO , sdkp, +"Enabling DIF Type %d protection\n" , type); +else +sd_printk (KERN_INFO , sdkp, +"Disabling DIF Type %d protection\n" , type); + } -sd_printk (KERN_INFO , sdkp,"Enabling DIF Type %d protection\n" , - type); - +if (!dix)return ; - }/* Enable DMA of protection information */ if (scsi_host_get_guard (sdkp->device->host) &SHOST_DIX_GUARD_IP )
@@ -343,10 +345,10 @@ void sd_dif_config_host(struct scsi_diskblk_integrity_register (disk, &dif_type1_integrity_crc);sd_printk (KERN_INFO , sdkp, -"Enabling %s integrity protection\n" , disk->integrity->name); +"Enabling DIX %s protection\n" , disk->integrity->name);/* Signal to block layer that we support sector tagging */ -if (type && sdkp->ATO) { +if (dif && type && sdkp->ATO) {if (type ==SD_DIF_TYPE3_PROTECTION ) disk->integrity->tag_size =sizeof (u16) +sizeof (u32);else
@@ -360,7 +362,7 @@ void sd_dif_config_host(struct scsi_disk/* * DIF DMA operation magic decoder ring. */ -void sd_dif_op (struct scsi_cmnd *scmd,unsigned int dif,unsigned int dix) +void sd_dif_op (struct scsi_cmnd *scmd,unsigned int dif,unsigned int dix,unsigned int type) {int csum_convert, prot_op;
@@ -405,7 +407,8 @@ void sd_dif_op(struct scsi_cmnd *scmd, u }scsi_set_prot_op (scmd, prot_op); -scsi_set_prot_type (scmd, dif); +if (dif) +scsi_set_prot_type (scmd, type); }/*