Skip to contentSkip to conversation

blktap3/libxl: add support for blktap3 in libxl

PATCH New Thanos Makatos 2 participants 17 messages Feb 8, 2013 – Mar 5, 2013

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 blktap3/libxl: add support for blktap3 in libxl

This patch series implements support for blktap3 in libxl.

Supporting blktap3 requires rather few changes:
1. We introduce a new disk back-end type (TAP3) and a new device kind (VBD3) to allow blktap3 to co-exist with blktap3. blktap2 remains the default back-end for tap devices. Switching in the future to blktap3 as the default handler of tap devices should be trivial.
2. libxl doesn't spawn the tapdisk process any more, as is the case for blktap2, since the tapback daemon is responsible for that. Thus, libxl only needs to write to XenStore the file/partition/whatever backing the virtual disk so that the tapback daemon can pass it to tapdisk.
3. Since there is no block device in dom0 any more, pygrub won't be able to boot from VHD files. To get around this problem, pygrub can use the NBD functionality (existing in blktap2.5): it can explicitly ask tapback to create a NDB in order to access the virtual disk. This functionality will be implemented in a future patch series. However, this will only work for Linux dom0's. As a generic solution that would work on any dom0, we could implement a simple protocol for data exchange between pygrub and tapdisk.

#1 lore raw

PATCH 1/1 blktap3/libxl: add new device kind and disk back-end

We use new identifiers so that blktap2 and blktap3 can co-exist.

tools/libxl/libxl_types.idl +1 -0
diff -r 6c1b12c884b4 -r dd920505264c tools/libxl/libxl_types.idl
@@ -58,6 +58,7 @@ libxl_disk_backend = Enumeration("disk_b
     (1, "PHY"),
     (2, "TAP"),
     (3, "QDISK"),
+    (4, "TAP3"),
     ])
 
 libxl_nic_type = Enumeration("nic_type", [
tools/libxl/libxl_types_internal.idl +1 -0
diff -r 6c1b12c884b4 -r dd920505264c tools/libxl/libxl_types_internal.idl
@@ -20,6 +20,7 @@ libxl__device_kind = Enumeration("device
     (6, "VKBD"),
     (7, "CONSOLE"),
     (8, "VTPM"),
+    (9, "VBD3"),
     ])
 
 libxl__console_backend = Enumeration("console_backend", [
tools/libxl/libxlu_disk_l.c +1 -0
diff -r 6c1b12c884b4 -r dd920505264c tools/libxl/libxlu_disk_l.c
@@ -852,6 +852,7 @@ static void setformat(DiskParseContext *
 static void setbackendtype(DiskParseContext *dpc, const char *str) {
     if (     !strcmp(str,"phy"))   DSET(dpc,backend,BACKEND,str,PHY);
     else if (!strcmp(str,"tap"))   DSET(dpc,backend,BACKEND,str,TAP);
+    else if (!strcmp(str,"tap3"))   DSET(dpc,backend,BACKEND,str,TAP3);
     else if (!strcmp(str,"qdisk")) DSET(dpc,backend,BACKEND,str,QDISK);
     else xlu__disk_err(dpc,str,"unknown value for backendtype");
 }
tools/libxl/libxlu_disk_l.l +1 -0
diff -r 6c1b12c884b4 -r dd920505264c tools/libxl/libxlu_disk_l.l
@@ -109,6 +109,7 @@ static void setformat(DiskParseContext *
 static void setbackendtype(DiskParseContext *dpc, const char *str) {
     if (     !strcmp(str,"phy"))   DSET(dpc,backend,BACKEND,str,PHY);
     else if (!strcmp(str,"tap"))   DSET(dpc,backend,BACKEND,str,TAP);
+    else if (!strcmp(str,"tap3"))   DSET(dpc,backend,BACKEND,str,TAP3);
     else if (!strcmp(str,"qdisk")) DSET(dpc,backend,BACKEND,str,QDISK);
     else xlu__disk_err(dpc,str,"unknown value for backendtype");
 }
#2 lore raw

PATCH 1/1 blktap3/libxl: Check whether blktap3 is available

In reply to Thanos Makatos

This patch implements function libxl__blktap3_enabled, the equivalent of the existing libxl__blktap_enabled for blktap2. The checks performed are rather simple and should be extended.

tools/libxl/Makefile +2 -0
diff -r dd920505264c -r dd63f2992e71 tools/libxl/Makefile
@@ -37,8 +37,10 @@ LIBXLU_LIBS =
 LIBXL_OBJS-y = osdeps.o libxl_paths.o libxl_bootloader.o flexarray.o
 ifeq ($(LIBXL_BLKTAP),y)
 LIBXL_OBJS-y += libxl_blktap2.o
+LIBXL_OBJS-y += libxl_blktap3.o
 else
 LIBXL_OBJS-y += libxl_noblktap2.o
+LIBXL_OBJS-y += libxl_noblktap3.o
 endif
 LIBXL_OBJS-$(CONFIG_X86) += libxl_cpuid.o libxl_x86.o
 LIBXL_OBJS-$(CONFIG_IA64) += libxl_nocpuid.o libxl_noarch.o
tools/libxl/libxl_blktap3.c new file +60 -0

60 lines not on this page · raw message

tools/libxl/libxl_internal.h +8 -0
diff -r dd920505264c -r dd63f2992e71 tools/libxl/libxl_internal.h
@@ -1337,6 +1337,14 @@ struct libxl__cpuid_policy {
 };
 
 /*
+ * blktap3 support
+ */
+/* libxl__blktap_enabled:
+ *    return true if blktap3 support is available.
+ */
+_hidden int libxl__blktap3_enabled(libxl__gc *gc);
+
+/*
  * blktap2 support
  */
 
tools/libxl/libxl_noblktap3.c new file +26 -0
diff -r dd920505264c -r dd63f2992e71 tools/libxl/libxl_noblktap3.c
@@ -0,0 +1,26 @@
+/*
+ * Copyright (C) 2012      Citrix Ltd.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * 
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ * 
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301,
+ * USA.
+ */
+
+#include "libxl_osdeps.h" /* must come before any other headers */
+#include "libxl_internal.h"
+
+int libxl__blktap3_enabled(libxl__gc *gc)
+{
+    return 0;
+}
#14 lore raw

PATCH 1/1 blktap3/libxl: Handles blktap3 device in libxl

In reply to Thanos Makatos

Handling of blktap3 devices is similar to blktap2, except that libxl doesn't spawn the tapdisk and doesn't create the physical device in dom0.

tools/libxl/libxl.c +11 -0
diff -r dd63f2992e71 -r 6b54db4abe12 tools/libxl/libxl.c
@@ -1158,6 +1158,8 @@ static void disk_eject_xswatch_callback(
         disk->backend = LIBXL_DISK_BACKEND_TAP;
     } else if (!strcmp(backend_type, "qdisk")) {
         disk->backend = LIBXL_DISK_BACKEND_QDISK;
+    } else if (!strcmp(backend_type, "tap3")) {
+        disk->backend = LIBXL_DISK_BACKEND_TAP3;
     } else {
         disk->backend = LIBXL_DISK_BACKEND_UNKNOWN;
     }
@@ -1998,6 +2000,9 @@ int libxl__device_from_disk(libxl__gc *g
         case LIBXL_DISK_BACKEND_QDISK:
             device->backend_kind = LIBXL__DEVICE_KIND_QDISK;
             break;
+        case LIBXL_DISK_BACKEND_TAP3:
+            device->backend_kind = LIBXL__DEVICE_KIND_VBD3;
+            break;
         default:
             LIBXL__LOG(ctx, LIBXL__LOG_ERROR, "unrecognized disk backend type: %d\n",
                        disk->backend);
@@ -2113,6 +2118,12 @@ static void device_disk_add(libxl__egc *
 
                 /* now create a phy device to export the device to the guest */
                 goto do_backend_phy;
+            case LIBXL_DISK_BACKEND_TAP3:
+                flexarray_append(back, "params");
+                flexarray_append(back, libxl__sprintf(gc, "%s:%s",
+                    libxl__device_disk_string_of_format(disk->format),
+                    disk->pdev_path));
+                break;
             case LIBXL_DISK_BACKEND_QDISK:
                 flexarray_append(back, "params");
                 flexarray_append(back, libxl__sprintf(gc, "%s:%s",
tools/libxl/libxl_device.c +19 -0
diff -r dd63f2992e71 -r 6b54db4abe12 tools/libxl/libxl_device.c
@@ -190,6 +190,23 @@ static int disk_try_backend(disk_try_bac
         }
         return backend;
 
+    case LIBXL_DISK_BACKEND_TAP3:
+        /* TODO What's that script thing? */
+        if (a->disk->script) goto bad_script;
+
+        if (!libxl__blktap3_enabled(a->gc)) {
+            LIBXL__LOG(ctx, LIBXL__LOG_DEBUG, "Disk vdev=%s, backend tap"
+                       " unsuitable because blktap3 not available",
+                       a->disk->vdev);
+            return 0;
+        }
+        /* TODO other formats supported by blktap3? */
+        if (!(a->disk->format == LIBXL_DISK_FORMAT_RAW ||
+              a->disk->format == LIBXL_DISK_FORMAT_VHD)) {
+            goto bad_format;
+        }
+        return backend;
+
     case LIBXL_DISK_BACKEND_QDISK:
         if (a->disk->script) goto bad_script;
         return backend;
@@ -258,6 +275,7 @@ int libxl__device_disk_set_backend(libxl
         ok=
             disk_try_backend(&a, LIBXL_DISK_BACKEND_PHY) ?:
             disk_try_backend(&a, LIBXL_DISK_BACKEND_TAP) ?:
+            disk_try_backend(&a, LIBXL_DISK_BACKEND_TAP3) ?:
             disk_try_backend(&a, LIBXL_DISK_BACKEND_QDISK);
         if (ok)
             LIBXL__LOG(ctx, LIBXL__LOG_DEBUG, "Disk vdev=%s, using backend %s",
@@ -290,6 +308,7 @@ char *libxl__device_disk_string_of_backe
     switch (backend) {
         case LIBXL_DISK_BACKEND_QDISK: return "qdisk";
         case LIBXL_DISK_BACKEND_TAP: return "phy";
+        case LIBXL_DISK_BACKEND_TAP3: return "phy";
         case LIBXL_DISK_BACKEND_PHY: return "phy";
         default: return NULL;
     }
#3 lore raw

Re: [PATCH 2 of 3] blktap3/libxl: Check whether blktap3 is available

In reply to Thanos Makatos

Thanos Makatos writes ("[Xen-devel] [PATCH 2 of 3] blktap3/libxl: Check whether blktap3 is available"):

Quoted 3 lines

This patch implements function libxl__blktap3_enabled, the equivalent of the existing libxl__blktap_enabled for blktap2. The checks performed are rather simple and should be extended.

...

tools/libxl/libxl_blktap3.c line 25

Quoted 3 lines
tools/libxl/libxl_blktap3.c new file +3 -0
+/* FIXME get the tapback name from blktap3 instead of hard-coding */
+#define TAPBACK_NAME "tapback"
+#define CMD "pidof " TAPBACK_NAME

I'm afraid I'm fundamentally unhappy with this approach to detecting the availability of blktap3. Searching the process table for process with particular names is not a good idea.

Can't you try to connect to its control socket ?

Ian.

#15 lore raw

Re: [PATCH 3 of 3] blktap3/libxl: Handles blktap3 device in libxl

In reply to Thanos Makatos

Thanos Makatos writes ("[Xen-devel] [PATCH 3 of 3] blktap3/libxl: Handles blktap3 device in libxl"):

Quoted 2 lines

Handling of blktap3 devices is similar to blktap2, except that libxl doesn't spawn the tapdisk and doesn't create the physical device in dom0.

...

tools/libxl/libxl.c static void device_disk_add(libxl__egc * · line 2129

Quoted 9 lines
tools/libxl/libxl.c +6 -0
+            case LIBXL_DISK_BACKEND_TAP3:
+                flexarray_append(back, "params");
+                flexarray_append(back, libxl__sprintf(gc, "%s:%s",
+                    libxl__device_disk_string_of_format(disk->format),
+                    disk->pdev_path));
+                break;
             case LIBXL_DISK_BACKEND_QDISK:
                 flexarray_append(back, "params");
                 flexarray_append(back, libxl__sprintf(gc, "%s:%s",

This seems to duplicate much of the entry for LIBXL_DISK_BACKEND_QDISK. I think this could be profitably reorganised to avoid clone-and-hack.

tools/libxl/libxl_device.c static int disk_try_backend(disk_try_bac · line 195

Quoted 10 lines

diff -r dd63f2992e71 -r 6b54db4abe12 tools/libxl/libxl_device.c

tools/libxl/libxl_device.c +3 -0
@@ -190,6 +190,23 @@ static int disk_try_backend(disk_try_bac
         }
         return backend;
 
+    case LIBXL_DISK_BACKEND_TAP3:
+        /* TODO What's that script thing? */
+        if (a->disk->script) goto bad_script;

Is this series supposed to be an RFC ? It still has the odd TODO and FIXME in it.

A disk script is an external script which arranges to provision a block device for use by guests (and dom0). It's an alternative to TAP3 so I think you can just delete the comment.

Ian.

#4 lore raw

Re: [PATCH 2 of 3] blktap3/libxl: Check whether blktap3 is available

In reply to Ian Jackson
Quoted 9 lines

tools/libxl/libxl_blktap3.c line 25

Quoted 3 lines
tools/libxl/libxl_blktap3.c new file +3 -0
+/* FIXME get the tapback name from blktap3 instead of hard-coding */
+#define TAPBACK_NAME "tapback"
+#define CMD "pidof " TAPBACK_NAME

I'm afraid I'm fundamentally unhappy with this approach to detecting the availability of blktap3. Searching the process table for process with particular names is not a good idea.

Can't you try to connect to its control socket ?

Sure.

#16 lore raw

Re: [PATCH 3 of 3] blktap3/libxl: Handles blktap3 device in libxl

In reply to Ian Jackson
Quoted 12 lines

...

tools/libxl/libxl.c static void device_disk_add(libxl__egc * · line 2129

Quoted 10 lines
tools/libxl/libxl.c +4 -0
+            case LIBXL_DISK_BACKEND_TAP3:
+                flexarray_append(back, "params");
+                flexarray_append(back, libxl__sprintf(gc, "%s:%s",
+                    libxl__device_disk_string_of_format(disk-

format),

tools/libxl/libxl.c +2 -0
+                    disk->pdev_path));
+                break;
             case LIBXL_DISK_BACKEND_QDISK:
                 flexarray_append(back, "params");
                 flexarray_append(back, libxl__sprintf(gc, "%s:%s",
Quoted 2 lines

This seems to duplicate much of the entry for LIBXL_DISK_BACKEND_QDISK. I think this could be profitably reorganised to avoid clone-and-hack.

You're right, though I think I missed something: tapback spawns tapdisk when the front-end starts running the Xenbus protocol, so if it takes too long for tapback to spawn the tapdisk (e.g. the host is over-loaded) the domain creation will time out. To address this, libxl could tell tapback it's going to need a tapdisk on a particular file/disk/whatever (it will also have to explicitly tell tapback that it doesn't need the tapdisk anymore). Does this sound plausible?

Quoted 8 lines
Quoted 8 lines

diff -r dd63f2992e71 -r 6b54db4abe12 tools/libxl/libxl_device.c

tools/libxl/libxl_device.c +0 -0
@@ -190,6 +190,23 @@ static int disk_try_backend(disk_try_bac
         }
         return backend;
 
Quoted 6 lines

tools/libxl/libxl_device.c static int disk_try_backend(disk_try_bac · line 195

Quoted 3 lines
tools/libxl/libxl_device.c +3 -0
+    case LIBXL_DISK_BACKEND_TAP3:
+        /* TODO What's that script thing? */
+        if (a->disk->script) goto bad_script;

Is this series supposed to be an RFC ? It still has the odd TODO and FIXME in it.

No it's not an RFC. Some TODOs are there as guides for possible improvements/optimisations.

Quoted 4 lines

A disk script is an external script which arranges to provision a block device for use by guests (and dom0). It's an alternative to TAP3 so I think you can just delete the comment.

I'll update the comment.

Quoted 2 lines

Ian.

#5 lore raw

Re: [PATCH 2 of 3] blktap3/libxl: Check whether blktap3 is available

In reply to Ian Jackson
Quoted 14 lines

Thanos Makatos writes ("[Xen-devel] [PATCH 2 of 3] blktap3/libxl: Check whether blktap3 is available"):

Quoted 3 lines

This patch implements function libxl__blktap3_enabled, the equivalent of the existing libxl__blktap_enabled for blktap2. The checks performed are rather simple and should be extended.

...

tools/libxl/libxl_blktap3.c line 25

Quoted 3 lines
tools/libxl/libxl_blktap3.c new file +3 -0
+/* FIXME get the tapback name from blktap3 instead of hard-coding */
+#define TAPBACK_NAME "tapback"
+#define CMD "pidof " TAPBACK_NAME

I'm afraid I'm fundamentally unhappy with this approach to detecting the availability of blktap3. Searching the process table for process with particular names is not a good idea.

Quoted 3 lines

Can't you try to connect to its control socket ?

Ian.

There's no control socket yet. Could we leave this as a future improvement?

#6 lore raw

Re: [PATCH 2 of 3] blktap3/libxl: Check whether blktap3 is available

Thanos Makatos writes ("RE: [Xen-devel] [PATCH 2 of 3] blktap3/libxl: Check whether blktap3 is available"):

Quoted 15 lines
Quoted 15 lines

Thanos Makatos writes ("[Xen-devel] [PATCH 2 of 3] blktap3/libxl: Check whether blktap3 is available"):

Quoted 3 lines

This patch implements function libxl__blktap3_enabled, the equivalent of the existing libxl__blktap_enabled for blktap2. The checks performed are rather simple and should be extended.

...

tools/libxl/libxl_blktap3.c line 25

Quoted 3 lines
tools/libxl/libxl_blktap3.c new file +3 -0
+/* FIXME get the tapback name from blktap3 instead of hard-coding */
+#define TAPBACK_NAME "tapback"
+#define CMD "pidof " TAPBACK_NAME

I'm afraid I'm fundamentally unhappy with this approach to detecting the availability of blktap3. Searching the process table for process with particular names is not a good idea.

Can't you try to connect to its control socket ?

...

Quoted 1 line

There's no control socket yet. Could we leave this as a future improvement?

How do you control this thing then ? Does it listen on xenstore ?

In any case, you need to do this test in some way which is reliable.

The reason why searching the process table for processes with particular names is not a good idea is that there is no rule which says that other subsystems aren't allowed to create processes with any names they like.

Ian.

#7 lore raw

Re: [PATCH 2 of 3] blktap3/libxl: Check whether blktap3 is available

Quoted 7 lines
Quoted 1 line
Quoted 1 line

Can't you try to connect to its control socket ?

...

Quoted 1 line

There's no control socket yet. Could we leave this as a future

improvement?

How do you control this thing then ? Does it listen on xenstore ?

Quoted 8 lines

In any case, you need to do this test in some way which is reliable.

The reason why searching the process table for processes with particular names is not a good idea is that there is no rule which says that other subsystems aren't allowed to create processes with any names they like.

Ian.

Tapback watches XenStore, so it doesn't need the control socket to function. However, the control socket will be necessary for doing more elaborate stuff (e.g. controlling a tapdisk in a thread-safe manner). I understand the problems of using a processes' name in this case, but since the control socket is not absolutely necessary at this point (it's actually not yet implemented in the tapback daemon), could we leave this as a future improvement?

#8 lore raw

Re: [PATCH 2 of 3] blktap3/libxl: Check whether blktap3 is available

Thanos Makatos writes ("RE: [Xen-devel] [PATCH 2 of 3] blktap3/libxl: Check whether blktap3 is available"):

Quoted 2 lines

Tapback watches XenStore, so it doesn't need the control socket to function.

So if all you're doing is seeing whether it's available, surely you can have it write something in a fixed location in xenstore on startup ?

Quoted 3 lines

However, the control socket will be necessary for doing more elaborate stuff (e.g. controlling a tapdisk in a thread-safe manner).

I'm not sure I understand this comment. What is not thread-safe about controlling it via xenstore ?

Quoted 4 lines

I understand the problems of using a processes' name in this case, but since the control socket is not absolutely necessary at this point (it's actually not yet implemented in the tapback daemon), could we leave this as a future improvement?

On the whole I think it would be better not to introduce bugs on the vague promise of fixing them later "as a future improvement" ...

Thanks,
Ian.

#9 lore raw

Re: [PATCH 2 of 3] blktap3/libxl: Check whether blktap3 is available

Quoted 9 lines

So if all you're doing is seeing whether it's available, surely you can have it write something in a fixed location in xenstore on startup ?

Quoted 1 line

However, the control socket will be necessary for doing more

elaborate

Quoted 1 line

stuff (e.g. controlling a tapdisk in a thread-safe manner).

I'm not sure I understand this comment. What is not thread-safe about controlling it via xenstore ?

There are some operations that need to be performed on running tapdisks that do not involve XenStore, e.g. refreshing a tapdisk as the result of a VHD snapshot operation.

Quoted 9 lines
Quoted 2 lines

I understand the problems of using a processes' name in this case,

but

Quoted 3 lines

since the control socket is not absolutely necessary at this point (it's actually not yet implemented in the tapback daemon), could we leave this as a future improvement?

On the whole I think it would be better not to introduce bugs on the vague promise of fixing them later "as a future improvement" ...

Fair enough!

Quoted 3 lines

Thanks,
Ian.

#10 lore raw

Re: [PATCH 2 of 3] blktap3/libxl: Check whether blktap3 is available

Thanos Makatos writes ("RE: [Xen-devel] [PATCH 2 of 3] blktap3/libxl: Check whether blktap3 is available"):
...

Quoted 4 lines
Quoted 2 lines

I'm not sure I understand this comment. What is not thread-safe about controlling it via xenstore ?

There are some operations that need to be performed on running tapdisks that do not involve XenStore, e.g. refreshing a tapdisk as the result of a VHD snapshot operation.

You mean "there are some operations whose control path will be outside xenstore in the current design", I think ?

How will these control operations be invoked when the tapdisk is running in a driver/stub/backend domain rather than the same domain as the main toolstack ?

Ian.

#11 lore raw

Re: [PATCH 2 of 3] blktap3/libxl: Check whether blktap3 is available

Quoted 6 lines
Quoted 1 line

There are some operations that need to be performed on running

tapdisks that do not involve XenStore, e.g. refreshing a tapdisk as the result of a VHD snapshot operation.

You mean "there are some operations whose control path will be outside xenstore in the current design", I think ?

Yes.

Quoted 4 lines

How will these control operations be invoked when the tapdisk is running in a driver/stub/backend domain rather than the same domain as the main toolstack ?

I haven't given much thought to that, but I believe there are a number of viable options. We could use XenStore, though I think we should avoid doing that for performance reasons. I assume the tapdisk(s) will be running on the same domain the tapback daemon is, so we can make tapback listen on a socket in order that the toolstack running on another domain can talk to it. Does this sound plausible?

Quoted 2 lines

Ian.

#12 lore raw

Re: [PATCH 2 of 3] blktap3/libxl: Check whether blktap3 is available

Thanos Makatos writes ("RE: [Xen-devel] [PATCH 2 of 3] blktap3/libxl: Check whether blktap3 is available"):

Quoted 7 lines

I haven't given much thought to that, but I believe there are a number of viable options. We could use XenStore, though I think we should avoid doing that for performance reasons. I assume the tapdisk(s) will be running on the same domain the tapback daemon is, so we can make tapback listen on a socket in order that the toolstack running on another domain can talk to it. Does this sound plausible?

Aren't you positing some kind of interdomain socket here ?

Ian.

#13 lore raw

Re: [PATCH 2 of 3] blktap3/libxl: Check whether blktap3 is available

Quoted 9 lines
Quoted 1 line

I haven't given much thought to that, but I believe there are a

number

Quoted 5 lines

of viable options. We could use XenStore, though I think we should avoid doing that for performance reasons. I assume the tapdisk(s) will be running on the same domain the tapback daemon is, so we can make tapback listen on a socket in order that the toolstack running on another domain can talk to it. Does this sound plausible?

Aren't you positing some kind of interdomain socket here ?

Yes. Have there been any discussions on how service domains can/should communicate?

Quoted 2 lines

Ian.