[GIT PULL 1/3] omap non-urgent fixes for v3.20

Tony Lindgren

author

2015-01-16 23:21 UTC #0 lore raw

The following changes since commit 97bf6af1f928216fd6c5a66e8a57bfa95a659672:

Linux 3.19-rc1 (2014-12-20 17:08:50 -0800)

are available in the git repository at:

git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap tags/omap-for-v3.20/fixes-not-urgent-pt1

for you to fetch changes up to 13efcb188984f69e1f97b4d9e7d3663fb782946f:

ARM: OMAP2+: Disable omap3 PM init for ti81xx (2015-01-14 17:37:16 -0800)

----------------------------------------------------------------
Non-urgent fixes for omap variant dm816x that has been in a sorry broken half merged state for a few years now. This gets us to the point where we can boot it properly once the related SoC data is added. Note that we've already made dm816x device tree only by removing the known broken board file.

----------------------------------------------------------------
Tony Lindgren (6):
ARM: OMAP2+: Fix error handling for omap2_clk_enable_init_clocks
ARM: OMAP2+: Fix ti81xx devtype
ARM: OMAP2+: Fix ti81xx class type
ARM: OMAP2+: Fix dm814 and dm816 for clocks and timer init
ARM: OMAP2+: Fix reboot for 81xx
ARM: OMAP2+: Disable omap3 PM init for ti81xx

 arch/arm/mach-omap2/Makefile                |  1 +
 arch/arm/mach-omap2/clock.c                 |  3 +++
 arch/arm/mach-omap2/common.h                | 11 +++++++++-
 arch/arm/mach-omap2/control.h               |  4 ++++
 arch/arm/mach-omap2/id.c                    |  2 ++
 arch/arm/mach-omap2/io.c                    | 26 +++++++++++++++++-----
 arch/arm/mach-omap2/powerdomains3xxx_data.c |  2 +-
 arch/arm/mach-omap2/prm_common.c            |  4 ++++
 arch/arm/mach-omap2/soc.h                   |  4 ++--
 arch/arm/mach-omap2/ti81xx-restart.c        | 34 +++++++++++++++++++++++++++++
 arch/arm/mach-omap2/timer.c                 |  2 ++
 11 files changed, 84 insertions(+), 9 deletions(-)
 create mode 100644 arch/arm/mach-omap2/ti81xx-restart.c

Tony Lindgren

author

2015-01-16 23:21 UTC #1 lore raw

[GIT PULL 2/3] omap clean-up for v3.20

The following changes since commit 97bf6af1f928216fd6c5a66e8a57bfa95a659672:

Linux 3.19-rc1 (2014-12-20 17:08:50 -0800)

are available in the git repository at:

git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap tags/omap-for-v3.20/cleanup-pt1

for you to fetch changes up to ca662ee7b8a85c54c1cb9ef34b7c6b4f67933a7e:

ARM: OMAP2+: Remove unused ti81xx platform init code (2015-01-14 17:21:00 -0800)

----------------------------------------------------------------
Clean-up for omaps to remove dead code found with cppcheck after we've made several SoCs to boot in device tree only mode.

----------------------------------------------------------------
Rickard Strandqvist (10):
ARM: OMAP2+: clkt2xxx_apll.c: Remove some unused functions
ARM: OMAP2+: cm33xx.c: Remove some unused functions
ARM: OMAP2+: dpll44xx.c: Remove unused function
ARM: OMAP2+: omap_hwmod.c: Remove some unused functions
ARM: OMAP2+: powerdomain.c: Remove some unused functions
ARM: OMAP2+: voltage: Remove some unused functions
ARM: OMAP2+: omap-pm-noop.c: Remove some unused functions
ARM: OMAP1: irq.c: Remove unused function
ARM: OMAP1: timer32k.c: Remove unused function
ARM: OMAP: dma.c: Remove unused function

Tero Kristo (3):
ARM: OMAP2: clock: remove unused apll code
ARM: OMAP2: CM: remove unused PLL functions
ARM: OMAP3+: PRM: remove prm_get_reset_sources declaration from headers

Tony Lindgren (1):
ARM: OMAP2+: Remove unused ti81xx platform init code

 arch/arm/mach-omap1/irq.c               |   5 -
 arch/arm/mach-omap1/timer32k.c          |   5 -
 arch/arm/mach-omap2/Makefile            |   1 -
 arch/arm/mach-omap2/cclock3xxx_data.c   |   6 +-
 arch/arm/mach-omap2/clkt2xxx_apll.c     | 142 -------------------
 arch/arm/mach-omap2/clock.h             |   1 -
 arch/arm/mach-omap2/clock2xxx.h         |  11 --
 arch/arm/mach-omap2/cm2xxx.c            |  10 --
 arch/arm/mach-omap2/cm2xxx.h            |   2 -
 arch/arm/mach-omap2/cm33xx.c            |  21 ---
 arch/arm/mach-omap2/dpll44xx.c          |  20 ---
 arch/arm/mach-omap2/omap-pm-noop.c      | 196 ---------------------------
 arch/arm/mach-omap2/omap-pm.h           | 192 --------------------------
 arch/arm/mach-omap2/omap_hwmod.c        | 232 --------------------------------
 arch/arm/mach-omap2/omap_hwmod.h        |  16 ---
 arch/arm/mach-omap2/omap_phy_internal.c |  35 -----
 arch/arm/mach-omap2/powerdomain.c       |  82 -----------
 arch/arm/mach-omap2/powerdomain.h       |   5 -
 arch/arm/mach-omap2/prm3xxx.h           |   1 -
 arch/arm/mach-omap2/prm44xx_54xx.h      |   1 -
 arch/arm/mach-omap2/usb-musb.c          |  12 +-
 arch/arm/mach-omap2/usb.h               |   2 -
 arch/arm/mach-omap2/voltage.c           | 110 ---------------
 arch/arm/mach-omap2/voltage.h           |  13 --
 arch/arm/plat-omap/dma.c                |   8 --
 25 files changed, 3 insertions(+), 1126 deletions(-)
 delete mode 100644 arch/arm/mach-omap2/clkt2xxx_apll.c

Tony Lindgren

author

2015-01-16 23:21 UTC #2 lore raw

[GIT PULL 2/3] omap clean-up for v3.20

In reply to Tony Lindgren

The following changes since commit 97bf6af1f928216fd6c5a66e8a57bfa95a659672:

Linux 3.19-rc1 (2014-12-20 17:08:50 -0800)

are available in the git repository at:

git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap tags/omap-for-v3.20/cleanup-pt1

for you to fetch changes up to ca662ee7b8a85c54c1cb9ef34b7c6b4f67933a7e:

ARM: OMAP2+: Remove unused ti81xx platform init code (2015-01-14 17:21:00 -0800)

----------------------------------------------------------------
Clean-up for omaps to remove dead code found with cppcheck after we've made several SoCs to boot in device tree only mode.

----------------------------------------------------------------
Rickard Strandqvist (10):
ARM: OMAP2+: clkt2xxx_apll.c: Remove some unused functions
ARM: OMAP2+: cm33xx.c: Remove some unused functions
ARM: OMAP2+: dpll44xx.c: Remove unused function
ARM: OMAP2+: omap_hwmod.c: Remove some unused functions
ARM: OMAP2+: powerdomain.c: Remove some unused functions
ARM: OMAP2+: voltage: Remove some unused functions
ARM: OMAP2+: omap-pm-noop.c: Remove some unused functions
ARM: OMAP1: irq.c: Remove unused function
ARM: OMAP1: timer32k.c: Remove unused function
ARM: OMAP: dma.c: Remove unused function

Tero Kristo (3):
ARM: OMAP2: clock: remove unused apll code
ARM: OMAP2: CM: remove unused PLL functions
ARM: OMAP3+: PRM: remove prm_get_reset_sources declaration from headers

Tony Lindgren (1):
ARM: OMAP2+: Remove unused ti81xx platform init code

 arch/arm/mach-omap1/irq.c               |   5 -
 arch/arm/mach-omap1/timer32k.c          |   5 -
 arch/arm/mach-omap2/Makefile            |   1 -
 arch/arm/mach-omap2/cclock3xxx_data.c   |   6 +-
 arch/arm/mach-omap2/clkt2xxx_apll.c     | 142 -------------------
 arch/arm/mach-omap2/clock.h             |   1 -
 arch/arm/mach-omap2/clock2xxx.h         |  11 --
 arch/arm/mach-omap2/cm2xxx.c            |  10 --
 arch/arm/mach-omap2/cm2xxx.h            |   2 -
 arch/arm/mach-omap2/cm33xx.c            |  21 ---
 arch/arm/mach-omap2/dpll44xx.c          |  20 ---
 arch/arm/mach-omap2/omap-pm-noop.c      | 196 ---------------------------
 arch/arm/mach-omap2/omap-pm.h           | 192 --------------------------
 arch/arm/mach-omap2/omap_hwmod.c        | 232 --------------------------------
 arch/arm/mach-omap2/omap_hwmod.h        |  16 ---
 arch/arm/mach-omap2/omap_phy_internal.c |  35 -----
 arch/arm/mach-omap2/powerdomain.c       |  82 -----------
 arch/arm/mach-omap2/powerdomain.h       |   5 -
 arch/arm/mach-omap2/prm3xxx.h           |   1 -
 arch/arm/mach-omap2/prm44xx_54xx.h      |   1 -
 arch/arm/mach-omap2/usb-musb.c          |  12 +-
 arch/arm/mach-omap2/usb.h               |   2 -
 arch/arm/mach-omap2/voltage.c           | 110 ---------------
 arch/arm/mach-omap2/voltage.h           |  13 --
 arch/arm/plat-omap/dma.c                |   8 --
 25 files changed, 3 insertions(+), 1126 deletions(-)
 delete mode 100644 arch/arm/mach-omap2/clkt2xxx_apll.c

Tony Lindgren

author

2015-01-16 23:21 UTC #3 lore raw

[GIT PULL 3/3] omap device tree changes for v3.20

In reply to Tony Lindgren

The following changes since commit 97bf6af1f928216fd6c5a66e8a57bfa95a659672:

Linux 3.19-rc1 (2014-12-20 17:08:50 -0800)

are available in the git repository at:

git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap tags/omap-for-v3.20/dt-pt1

for you to fetch changes up to 7300bfff886a1340cfeb252035303e265cd556d9:

ARM: dts: omap3-gta04: Add handling for tv output (2015-01-13 08:02:21 -0800)

----------------------------------------------------------------
Device tree changes for omaps. Mostly to add support for new am437x-idk and update am437x-sk boards. Also enabling new devices for multiple boards.

----------------------------------------------------------------
Aaro Koskinen (1):

      ARM: dts: N950/N9: add twl_power

Benoit Parrot (3):
ARM: dts: am4372: add VPFE DT node entries
ARM: dts: am43x-epos-evm: add VPFE device tree data
ARM: dts: am437x-gp-evm: add VPFE device tree data

Darren Etheridge (1):
ARM: dts: am437x-sk-evm: add VPFE device tree data

Dave Gerlach (1):
ARM: dts: am437x-sk-evm: Hook dcdc2 as the cpu0-supply

Dmitry Lifshitz (1):
ARM: dts: cm-t3x: add NAND support

Felipe Balbi (10):
ARM: dts: am437x-sk: remove internal pulls from QSPI
ARM: dts: am437x-sk: add explicit MMC0 pinmux
ARM: dts: am437x-sk: remove ethernet pulls
ARM: dts: am437x-sk: add explicit pinmux for both USB instances
ARM: dts: am437x-sk: remove internal i2c pullups
ARM: dts: am437x-sk: remove DSS pulls
ARM: dts: am57xx-beagle-x15: Add dual ethernet
ARM: dts: add support for AM437x IDK
ARM: dts: am437x-sk: add power button binding
ARM: dts: am437x-idk: add gpio-based power key

Marek Belisko (1):
ARM: dts: omap3-gta04: Add handling for tv output

Nishanth Menon (1):
ARM: dts: am57xx-beagle-x15: Add GPIO controlled fan node

Pavel Machek (1):
ARM: dts: omap3-n900: cleanup english

Vignesh R (1):
ARM: dts: DRA7X: drop id property in pcie_phy

 arch/arm/boot/dts/Makefile              |   1 +
 arch/arm/boot/dts/am4372.dtsi           |  16 ++
 arch/arm/boot/dts/am437x-gp-evm.dts     | 106 +++++++++
 arch/arm/boot/dts/am437x-idk-evm.dts    | 405 ++++++++++++++++++++++++++++++++
 arch/arm/boot/dts/am437x-sk-evm.dts     | 217 ++++++++++++-----
 arch/arm/boot/dts/am43x-epos-evm.dts    |  53 +++++
 arch/arm/boot/dts/am57xx-beagle-x15.dts | 120 ++++++++++
 arch/arm/boot/dts/dra7.dtsi             |   2 -
 arch/arm/boot/dts/omap3-cm-t3x.dtsi     |  58 +++++
 arch/arm/boot/dts/omap3-cm-t3x30.dtsi   |   3 +-
 arch/arm/boot/dts/omap3-gta04.dtsi      |  49 ++++
 arch/arm/boot/dts/omap3-n900.dts        |   3 +-
 arch/arm/boot/dts/omap3-n950-n9.dtsi    |   5 +
 arch/arm/boot/dts/omap3-sbc-t3517.dts   |   4 +
 arch/arm/boot/dts/omap3-sbc-t3530.dts   |  10 +-
 arch/arm/boot/dts/omap3-sbc-t3730.dts   |   5 +-
 16 files changed, 979 insertions(+), 78 deletions(-)
 create mode 100644 arch/arm/boot/dts/am437x-idk-evm.dts

Tony Lindgren

author

2015-01-16 23:21 UTC #4 lore raw

[GIT PULL 3/3] omap device tree changes for v3.20

In reply to Tony Lindgren

The following changes since commit 97bf6af1f928216fd6c5a66e8a57bfa95a659672:

Linux 3.19-rc1 (2014-12-20 17:08:50 -0800)

are available in the git repository at:

git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap tags/omap-for-v3.20/dt-pt1

for you to fetch changes up to 7300bfff886a1340cfeb252035303e265cd556d9:

ARM: dts: omap3-gta04: Add handling for tv output (2015-01-13 08:02:21 -0800)

----------------------------------------------------------------
Device tree changes for omaps. Mostly to add support for new am437x-idk and update am437x-sk boards. Also enabling new devices for multiple boards.

----------------------------------------------------------------
Aaro Koskinen (1):

      ARM: dts: N950/N9: add twl_power

Benoit Parrot (3):
ARM: dts: am4372: add VPFE DT node entries
ARM: dts: am43x-epos-evm: add VPFE device tree data
ARM: dts: am437x-gp-evm: add VPFE device tree data

Darren Etheridge (1):
ARM: dts: am437x-sk-evm: add VPFE device tree data

Dave Gerlach (1):
ARM: dts: am437x-sk-evm: Hook dcdc2 as the cpu0-supply

Dmitry Lifshitz (1):
ARM: dts: cm-t3x: add NAND support

Felipe Balbi (10):
ARM: dts: am437x-sk: remove internal pulls from QSPI
ARM: dts: am437x-sk: add explicit MMC0 pinmux
ARM: dts: am437x-sk: remove ethernet pulls
ARM: dts: am437x-sk: add explicit pinmux for both USB instances
ARM: dts: am437x-sk: remove internal i2c pullups
ARM: dts: am437x-sk: remove DSS pulls
ARM: dts: am57xx-beagle-x15: Add dual ethernet
ARM: dts: add support for AM437x IDK
ARM: dts: am437x-sk: add power button binding
ARM: dts: am437x-idk: add gpio-based power key

Marek Belisko (1):
ARM: dts: omap3-gta04: Add handling for tv output

Nishanth Menon (1):
ARM: dts: am57xx-beagle-x15: Add GPIO controlled fan node

Pavel Machek (1):
ARM: dts: omap3-n900: cleanup english

Vignesh R (1):
ARM: dts: DRA7X: drop id property in pcie_phy

 arch/arm/boot/dts/Makefile              |   1 +
 arch/arm/boot/dts/am4372.dtsi           |  16 ++
 arch/arm/boot/dts/am437x-gp-evm.dts     | 106 +++++++++
 arch/arm/boot/dts/am437x-idk-evm.dts    | 405 ++++++++++++++++++++++++++++++++
 arch/arm/boot/dts/am437x-sk-evm.dts     | 217 ++++++++++++-----
 arch/arm/boot/dts/am43x-epos-evm.dts    |  53 +++++
 arch/arm/boot/dts/am57xx-beagle-x15.dts | 120 ++++++++++
 arch/arm/boot/dts/dra7.dtsi             |   2 -
 arch/arm/boot/dts/omap3-cm-t3x.dtsi     |  58 +++++
 arch/arm/boot/dts/omap3-cm-t3x30.dtsi   |   3 +-
 arch/arm/boot/dts/omap3-gta04.dtsi      |  49 ++++
 arch/arm/boot/dts/omap3-n900.dts        |   3 +-
 arch/arm/boot/dts/omap3-n950-n9.dtsi    |   5 +
 arch/arm/boot/dts/omap3-sbc-t3517.dts   |   4 +
 arch/arm/boot/dts/omap3-sbc-t3530.dts   |  10 +-
 arch/arm/boot/dts/omap3-sbc-t3730.dts   |   5 +-
 16 files changed, 979 insertions(+), 78 deletions(-)
 create mode 100644 arch/arm/boot/dts/am437x-idk-evm.dts

Tony Lindgren

author

2015-01-16 23:25 UTC #5 lore raw

[GIT PULL 2/3] omap clean-up for v3.20

In reply to Tony Lindgren

The following changes since commit 97bf6af1f928216fd6c5a66e8a57bfa95a659672:

Linux 3.19-rc1 (2014-12-20 17:08:50 -0800)

are available in the git repository at:

git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap tags/omap-for-v3.20/cleanup-pt1

for you to fetch changes up to ca662ee7b8a85c54c1cb9ef34b7c6b4f67933a7e:

ARM: OMAP2+: Remove unused ti81xx platform init code (2015-01-14 17:21:00 -0800)

----------------------------------------------------------------
Clean-up for omaps to remove dead code found with cppcheck after we've made several SoCs to boot in device tree only mode.

----------------------------------------------------------------
Rickard Strandqvist (10):
ARM: OMAP2+: clkt2xxx_apll.c: Remove some unused functions
ARM: OMAP2+: cm33xx.c: Remove some unused functions
ARM: OMAP2+: dpll44xx.c: Remove unused function
ARM: OMAP2+: omap_hwmod.c: Remove some unused functions
ARM: OMAP2+: powerdomain.c: Remove some unused functions
ARM: OMAP2+: voltage: Remove some unused functions
ARM: OMAP2+: omap-pm-noop.c: Remove some unused functions
ARM: OMAP1: irq.c: Remove unused function
ARM: OMAP1: timer32k.c: Remove unused function
ARM: OMAP: dma.c: Remove unused function

Tero Kristo (3):
ARM: OMAP2: clock: remove unused apll code
ARM: OMAP2: CM: remove unused PLL functions
ARM: OMAP3+: PRM: remove prm_get_reset_sources declaration from headers

Tony Lindgren (1):
ARM: OMAP2+: Remove unused ti81xx platform init code

 arch/arm/mach-omap1/irq.c               |   5 -
 arch/arm/mach-omap1/timer32k.c          |   5 -
 arch/arm/mach-omap2/Makefile            |   1 -
 arch/arm/mach-omap2/cclock3xxx_data.c   |   6 +-
 arch/arm/mach-omap2/clkt2xxx_apll.c     | 142 -------------------
 arch/arm/mach-omap2/clock.h             |   1 -
 arch/arm/mach-omap2/clock2xxx.h         |  11 --
 arch/arm/mach-omap2/cm2xxx.c            |  10 --
 arch/arm/mach-omap2/cm2xxx.h            |   2 -
 arch/arm/mach-omap2/cm33xx.c            |  21 ---
 arch/arm/mach-omap2/dpll44xx.c          |  20 ---
 arch/arm/mach-omap2/omap-pm-noop.c      | 196 ---------------------------
 arch/arm/mach-omap2/omap-pm.h           | 192 --------------------------
 arch/arm/mach-omap2/omap_hwmod.c        | 232 --------------------------------
 arch/arm/mach-omap2/omap_hwmod.h        |  16 ---
 arch/arm/mach-omap2/omap_phy_internal.c |  35 -----
 arch/arm/mach-omap2/powerdomain.c       |  82 -----------
 arch/arm/mach-omap2/powerdomain.h       |   5 -
 arch/arm/mach-omap2/prm3xxx.h           |   1 -
 arch/arm/mach-omap2/prm44xx_54xx.h      |   1 -
 arch/arm/mach-omap2/usb-musb.c          |  12 +-
 arch/arm/mach-omap2/usb.h               |   2 -
 arch/arm/mach-omap2/voltage.c           | 110 ---------------
 arch/arm/mach-omap2/voltage.h           |  13 --
 arch/arm/plat-omap/dma.c                |   8 --
 25 files changed, 3 insertions(+), 1126 deletions(-)
 delete mode 100644 arch/arm/mach-omap2/clkt2xxx_apll.c

Tony Lindgren

author

2015-01-16 23:25 UTC #6 lore raw

[GIT PULL 3/3] omap device tree changes for v3.20

In reply to Tony Lindgren

The following changes since commit 97bf6af1f928216fd6c5a66e8a57bfa95a659672:

Linux 3.19-rc1 (2014-12-20 17:08:50 -0800)

are available in the git repository at:

git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap tags/omap-for-v3.20/dt-pt1

for you to fetch changes up to 7300bfff886a1340cfeb252035303e265cd556d9:

ARM: dts: omap3-gta04: Add handling for tv output (2015-01-13 08:02:21 -0800)

----------------------------------------------------------------
Device tree changes for omaps. Mostly to add support for new am437x-idk and update am437x-sk boards. Also enabling new devices for multiple boards.

----------------------------------------------------------------
Aaro Koskinen (1):

      ARM: dts: N950/N9: add twl_power

Benoit Parrot (3):
ARM: dts: am4372: add VPFE DT node entries
ARM: dts: am43x-epos-evm: add VPFE device tree data
ARM: dts: am437x-gp-evm: add VPFE device tree data

Darren Etheridge (1):
ARM: dts: am437x-sk-evm: add VPFE device tree data

Dave Gerlach (1):
ARM: dts: am437x-sk-evm: Hook dcdc2 as the cpu0-supply

Dmitry Lifshitz (1):
ARM: dts: cm-t3x: add NAND support

Felipe Balbi (10):
ARM: dts: am437x-sk: remove internal pulls from QSPI
ARM: dts: am437x-sk: add explicit MMC0 pinmux
ARM: dts: am437x-sk: remove ethernet pulls
ARM: dts: am437x-sk: add explicit pinmux for both USB instances
ARM: dts: am437x-sk: remove internal i2c pullups
ARM: dts: am437x-sk: remove DSS pulls
ARM: dts: am57xx-beagle-x15: Add dual ethernet
ARM: dts: add support for AM437x IDK
ARM: dts: am437x-sk: add power button binding
ARM: dts: am437x-idk: add gpio-based power key

Marek Belisko (1):
ARM: dts: omap3-gta04: Add handling for tv output

Nishanth Menon (1):
ARM: dts: am57xx-beagle-x15: Add GPIO controlled fan node

Pavel Machek (1):
ARM: dts: omap3-n900: cleanup english

Vignesh R (1):
ARM: dts: DRA7X: drop id property in pcie_phy

 arch/arm/boot/dts/Makefile              |   1 +
 arch/arm/boot/dts/am4372.dtsi           |  16 ++
 arch/arm/boot/dts/am437x-gp-evm.dts     | 106 +++++++++
 arch/arm/boot/dts/am437x-idk-evm.dts    | 405 ++++++++++++++++++++++++++++++++
 arch/arm/boot/dts/am437x-sk-evm.dts     | 217 ++++++++++++-----
 arch/arm/boot/dts/am43x-epos-evm.dts    |  53 +++++
 arch/arm/boot/dts/am57xx-beagle-x15.dts | 120 ++++++++++
 arch/arm/boot/dts/dra7.dtsi             |   2 -
 arch/arm/boot/dts/omap3-cm-t3x.dtsi     |  58 +++++
 arch/arm/boot/dts/omap3-cm-t3x30.dtsi   |   3 +-
 arch/arm/boot/dts/omap3-gta04.dtsi      |  49 ++++
 arch/arm/boot/dts/omap3-n900.dts        |   3 +-
 arch/arm/boot/dts/omap3-n950-n9.dtsi    |   5 +
 arch/arm/boot/dts/omap3-sbc-t3517.dts   |   4 +
 arch/arm/boot/dts/omap3-sbc-t3530.dts   |  10 +-
 arch/arm/boot/dts/omap3-sbc-t3730.dts   |   5 +-
 16 files changed, 979 insertions(+), 78 deletions(-)
 create mode 100644 arch/arm/boot/dts/am437x-idk-evm.dts

Olof Johansson

2015-01-22 00:50 UTC #8 lore raw

[GIT PULL 2/3] omap clean-up for v3.20

Quoted 56 lines · Tony Lindgren

The following changes since commit 97bf6af1f928216fd6c5a66e8a57bfa95a659672:
Linux 3.19-rc1 (2014-12-20 17:08:50 -0800)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap tags/omap-for-v3.20/cleanup-pt1
for you to fetch changes up to ca662ee7b8a85c54c1cb9ef34b7c6b4f67933a7e:
ARM: OMAP2+: Remove unused ti81xx platform init code (2015-01-14 17:21:00 -0800)
----------------------------------------------------------------
Clean-up for omaps to remove dead code found with cppcheck after we've made several SoCs to boot in device tree only mode.
----------------------------------------------------------------
Rickard Strandqvist (10):
ARM: OMAP2+: clkt2xxx_apll.c: Remove some unused functions
ARM: OMAP2+: cm33xx.c: Remove some unused functions
ARM: OMAP2+: dpll44xx.c: Remove unused function
ARM: OMAP2+: omap_hwmod.c: Remove some unused functions
ARM: OMAP2+: powerdomain.c: Remove some unused functions
ARM: OMAP2+: voltage: Remove some unused functions
ARM: OMAP2+: omap-pm-noop.c: Remove some unused functions
ARM: OMAP1: irq.c: Remove unused function
ARM: OMAP1: timer32k.c: Remove unused function
ARM: OMAP: dma.c: Remove unused function
Tero Kristo (3):
ARM: OMAP2: clock: remove unused apll code
ARM: OMAP2: CM: remove unused PLL functions
ARM: OMAP3+: PRM: remove prm_get_reset_sources declaration from headers
Tony Lindgren (1):
ARM: OMAP2+: Remove unused ti81xx platform init code
 arch/arm/mach-omap1/irq.c               |   5 -
 arch/arm/mach-omap1/timer32k.c          |   5 -
 arch/arm/mach-omap2/Makefile            |   1 -
 arch/arm/mach-omap2/cclock3xxx_data.c   |   6 +-
 arch/arm/mach-omap2/clkt2xxx_apll.c     | 142 -------------------
 arch/arm/mach-omap2/clock.h             |   1 -
 arch/arm/mach-omap2/clock2xxx.h         |  11 --
 arch/arm/mach-omap2/cm2xxx.c            |  10 --
 arch/arm/mach-omap2/cm2xxx.h            |   2 -
 arch/arm/mach-omap2/cm33xx.c            |  21 ---
 arch/arm/mach-omap2/dpll44xx.c          |  20 ---
 arch/arm/mach-omap2/omap-pm-noop.c      | 196 ---------------------------
 arch/arm/mach-omap2/omap-pm.h           | 192 --------------------------
 arch/arm/mach-omap2/omap_hwmod.c        | 232 --------------------------------
 arch/arm/mach-omap2/omap_hwmod.h        |  16 ---
 arch/arm/mach-omap2/omap_phy_internal.c |  35 -----
 arch/arm/mach-omap2/powerdomain.c       |  82 -----------
 arch/arm/mach-omap2/powerdomain.h       |   5 -
 arch/arm/mach-omap2/prm3xxx.h           |   1 -

Quoted 8 lines

 arch/arm/mach-omap2/prm44xx_54xx.h      |   1 -
 arch/arm/mach-omap2/usb-musb.c          |  12 +-
 arch/arm/mach-omap2/usb.h               |   2 -
 arch/arm/mach-omap2/voltage.c           | 110 ---------------
 arch/arm/mach-omap2/voltage.h           |  13 --
 arch/arm/plat-omap/dma.c                |   8 --
 25 files changed, 3 insertions(+), 1126 deletions(-)
 delete mode 100644 arch/arm/mach-omap2/clkt2xxx_apll.c

Nice diffstat. Merged.

-Olof

Olof Johansson

Applied

2015-01-22 00:57 UTC #10 lore raw

[GIT PULL 3/3] omap device tree changes for v3.20

Quoted 8 lines · Tony Lindgren

The following changes since commit 97bf6af1f928216fd6c5a66e8a57bfa95a659672:
Linux 3.19-rc1 (2014-12-20 17:08:50 -0800)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap tags/omap-for-v3.20/dt-pt1

Quoted 8 lines

for you to fetch changes up to 7300bfff886a1340cfeb252035303e265cd556d9:
ARM: dts: omap3-gta04: Add handling for tv output (2015-01-13 08:02:21 -0800)
----------------------------------------------------------------
Device tree changes for omaps. Mostly to add support for new am437x-idk and update am437x-sk boards. Also enabling new devices for multiple boards.

Merged, thanks.

-Olof