omap non-urgent fixes for v3.20, part 2
The following changes since commit 13efcb188984f69e1f97b4d9e7d3663fb782946f:
ARM: OMAP2+: Disable omap3 PM init for ti81xx (2015-01-14 17:37:16 -0800)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap tags/omap-for-v3.20/fixes-not-urgent-pt2
for you to fetch changes up to 20d9448a59770420ead8078fb76948de32765fe6:
Merge tag 'for-v3.20/omap-hwmod-a' of git://git.kernel.org/pub/scm/linux/kernel/git/pjw/omap-pending into omap-for-v3.20/fixes-not-urgent (2015-01-21 16:52:17 -0800)
----------------------------------------------------------------
Non-critical fixes for omap hwmod code via Paul Walmsley <[email protected]>:
First set of OMAP2+ hwmod patches for Linux v3.20. These are mostly fixes for warnings, although there's one DRA7xx patch that fixes CONFIG_DEBUG_LL for AM572x/DRA7xx SoCs that use UART3 for console, such as the BeagleBoard-X15.
These patches entered Linux-next starting with the next-20150121 tag.
Basic build, boot, and PM test results can be found here:
http://www.pwsan.com/omap/testlogs/omap-hwmod-a-for-v3.20/20150121142621/
----------------------------------------------------------------
Keerthy (1):
ARM: OMAP: DRA7: hwmod: Make gpmc software supervised as the smart idle is broken
Lokesh Vutla (2):
ARM: OMAP2+: hwmod: print error if wait_target_ready() failed
ARM: DRA7: hwmod: Fix boot crash with DEBUG_LL enabled on UART3
Paul Walmsley (1):
MAINTAINERS: add maintainer for OMAP hwmod data
Tomi Valkeinen (1):
ARM: AM43xx: hwmod: set DSS submodule parent hwmods
Tony Lindgren (1):
Merge tag 'for-v3.20/omap-hwmod-a' of git://git.kernel.org/.../pjw/omap-pending into omap-for-v3.20/fixes-not-urgent
MAINTAINERS | 6 ++++++ arch/arm/mach-omap2/omap_hwmod.c | 4 ++-- arch/arm/mach-omap2/omap_hwmod_43xx_data.c | 2 ++ arch/arm/mach-omap2/omap_hwmod_7xx_data.c | 5 +++-- 4 files changed, 13 insertions(+), 4 deletions(-)
[GIT PULL 2/2] omap changes to make dm816x usable
The following changes since commit 13efcb188984f69e1f97b4d9e7d3663fb782946f:
ARM: OMAP2+: Disable omap3 PM init for ti81xx (2015-01-14 17:37:16 -0800)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap tags/omap-for-v3.20/dm816x-data
for you to fetch changes up to 4d38bd1237f5bb67c3d5d183fc41db4bf4dbfb6b:
ARM: OMAP2+: Add dm816x hwmod support (2015-01-26 09:26:32 -0800)
----------------------------------------------------------------
Patches to add necessary SoC related clockdomain and interconnect data to make dm816x boot with basic devices. This finally gets dm816x into a usable shape for further work to happen after a few years of stalled effort of making this SoC to work with the mainline kernel.
As most of the devices are similar to the other omap variants, we get at least serial, MMC, Ethernet, I2C, EDMA, pinctrl, SPI and GPMC working for these SoCs with the related device tree changes.
----------------------------------------------------------------
Aida Mynzhasova (1):
ARM: OMAP2+: Add clock domain support for dm816x
Tony Lindgren (2):
ARM: OMAP2+: Add board-generic.c entry for ti81xx
ARM: OMAP2+: Add dm816x hwmod support
arch/arm/mach-omap2/Makefile | 4 + arch/arm/mach-omap2/board-generic.c | 36 + arch/arm/mach-omap2/clockdomain.h | 1 + arch/arm/mach-omap2/clockdomains81xx_data.c | 194 +++++ arch/arm/mach-omap2/cm81xx.h | 61 ++ arch/arm/mach-omap2/io.c | 82 +- arch/arm/mach-omap2/omap_hwmod.c | 2 +- arch/arm/mach-omap2/omap_hwmod.h | 1 + arch/arm/mach-omap2/omap_hwmod_81xx_data.c | 1136 +++++++++++++++++++++++++++ 9 files changed, 1478 insertions(+), 39 deletions(-) create mode 100644 arch/arm/mach-omap2/clockdomains81xx_data.c create mode 100644 arch/arm/mach-omap2/cm81xx.h create mode 100644 arch/arm/mach-omap2/omap_hwmod_81xx_data.c
[GIT PULL 2/2] omap changes to make dm816x usable
In reply to Tony LindgrenThe following changes since commit 13efcb188984f69e1f97b4d9e7d3663fb782946f:
ARM: OMAP2+: Disable omap3 PM init for ti81xx (2015-01-14 17:37:16 -0800)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap tags/omap-for-v3.20/dm816x-data
for you to fetch changes up to 4d38bd1237f5bb67c3d5d183fc41db4bf4dbfb6b:
ARM: OMAP2+: Add dm816x hwmod support (2015-01-26 09:26:32 -0800)
----------------------------------------------------------------
Patches to add necessary SoC related clockdomain and interconnect data to make dm816x boot with basic devices. This finally gets dm816x into a usable shape for further work to happen after a few years of stalled effort of making this SoC to work with the mainline kernel.
As most of the devices are similar to the other omap variants, we get at least serial, MMC, Ethernet, I2C, EDMA, pinctrl, SPI and GPMC working for these SoCs with the related device tree changes.
----------------------------------------------------------------
Aida Mynzhasova (1):
ARM: OMAP2+: Add clock domain support for dm816x
Tony Lindgren (2):
ARM: OMAP2+: Add board-generic.c entry for ti81xx
ARM: OMAP2+: Add dm816x hwmod support
arch/arm/mach-omap2/Makefile | 4 + arch/arm/mach-omap2/board-generic.c | 36 + arch/arm/mach-omap2/clockdomain.h | 1 + arch/arm/mach-omap2/clockdomains81xx_data.c | 194 +++++ arch/arm/mach-omap2/cm81xx.h | 61 ++ arch/arm/mach-omap2/io.c | 82 +- arch/arm/mach-omap2/omap_hwmod.c | 2 +- arch/arm/mach-omap2/omap_hwmod.h | 1 + arch/arm/mach-omap2/omap_hwmod_81xx_data.c | 1136 +++++++++++++++++++++++++++ 9 files changed, 1478 insertions(+), 39 deletions(-) create mode 100644 arch/arm/mach-omap2/clockdomains81xx_data.c create mode 100644 arch/arm/mach-omap2/cm81xx.h create mode 100644 arch/arm/mach-omap2/omap_hwmod_81xx_data.c
[GIT PULL 2/2] omap changes to make dm816x usable
In reply to Tony LindgrenThe following changes since commit 13efcb188984f69e1f97b4d9e7d3663fb782946f:
ARM: OMAP2+: Disable omap3 PM init for ti81xx (2015-01-14 17:37:16 -0800)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap tags/omap-for-v3.20/dm816x-data
for you to fetch changes up to 4d38bd1237f5bb67c3d5d183fc41db4bf4dbfb6b:
ARM: OMAP2+: Add dm816x hwmod support (2015-01-26 09:26:32 -0800)
----------------------------------------------------------------
Patches to add necessary SoC related clockdomain and interconnect data to make dm816x boot with basic devices. This finally gets dm816x into a usable shape for further work to happen after a few years of stalled effort of making this SoC to work with the mainline kernel.
As most of the devices are similar to the other omap variants, we get at least serial, MMC, Ethernet, I2C, EDMA, pinctrl, SPI and GPMC working for these SoCs with the related device tree changes.
----------------------------------------------------------------
Aida Mynzhasova (1):
ARM: OMAP2+: Add clock domain support for dm816x
Tony Lindgren (2):
ARM: OMAP2+: Add board-generic.c entry for ti81xx
ARM: OMAP2+: Add dm816x hwmod support
arch/arm/mach-omap2/Makefile | 4 + arch/arm/mach-omap2/board-generic.c | 36 + arch/arm/mach-omap2/clockdomain.h | 1 + arch/arm/mach-omap2/clockdomains81xx_data.c | 194 +++++ arch/arm/mach-omap2/cm81xx.h | 61 ++ arch/arm/mach-omap2/io.c | 82 +- arch/arm/mach-omap2/omap_hwmod.c | 2 +- arch/arm/mach-omap2/omap_hwmod.h | 1 + arch/arm/mach-omap2/omap_hwmod_81xx_data.c | 1136 +++++++++++++++++++++++++++ 9 files changed, 1478 insertions(+), 39 deletions(-) create mode 100644 arch/arm/mach-omap2/clockdomains81xx_data.c create mode 100644 arch/arm/mach-omap2/cm81xx.h create mode 100644 arch/arm/mach-omap2/omap_hwmod_81xx_data.c
Olof Johansson
Applied[GIT PULL 2/2] omap changes to make dm816x usable
In reply to a message not in the archiveQuoted 19 lines · Tony Lindgren
The following changes since commit
13efcb188984f69e1f97b4d9e7d3663fb782946f:ARM: OMAP2+: Disable omap3 PM init for ti81xx (2015-01-14 17:37:16 -0800)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omaptags/omap-for-v3.20/dm816x-datafor you to fetch changes up to
4d38bd1237f5bb67c3d5d183fc41db4bf4dbfb6b:ARM: OMAP2+: Add dm816x hwmod support (2015-01-26 09:26:32 -0800)
----------------------------------------------------------------
Patches to add necessary SoC related clockdomain and interconnect data to make dm816x boot with basic devices. This finally gets dm816x into a usable shape for further work to happen after a few years of stalled effort of making this SoC to work with the mainline kernel.
Quoted 3 lines
As most of the devices are similar to the other omap variants, we get at least serial, MMC, Ethernet, I2C, EDMA, pinctrl, SPI and GPMC working for these SoCs with the related device tree changes.
Merged into next/soc.
Thanks,
-Olof