Skip to contentSkip to conversation

defconfig changes for omaps for v5.1

GIT PULL Tony Lindgren 2 participants 8 messages Feb 14, 2019 – Feb 15, 2019

lore
Share & tools
lore
#0 lore raw

From: "Tony Lindgren" <[email protected]>

The following changes since commit bfeffd155283772bbe78c6a05dec7c0128ee500c:

Linux 5.0-rc1 (2019-01-06 17:08:20 -0800)

are available in the Git repository at:

git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap tags/omap-for-v5.1/defconfig-signed

for you to fetch changes up to a8220ae7e740f8c568bd79ba38b6a3efe13100c1:

ARM: omap2plus_defconfig: Update for moved options (2019-01-31 10:54:06 -0800)

----------------------------------------------------------------
Defconfig changes for omaps

Drop PROVE_LOCKING as it should not be enabled in the defconfig. It causes quite a bit overhead as noted in the patch description.

Then let's update omap2plus_defconfig for dropped options and moved options. That way makesavedefconfig can actually be used to generate patches against omap2plus_defconfig.

----------------------------------------------------------------
Lukasz Luba (1):
ARM: omap2plus_defconfig: remove PROVE_LOCKING from defconfig

Tony Lindgren (2):
ARM: omap2plus_defconfig: Update for dropped options
ARM: omap2plus_defconfig: Update for moved options

 arch/arm/configs/omap2plus_defconfig | 83 +++++++++++++++++-------------------
 1 file changed, 38 insertions(+), 45 deletions(-)
#1 lore raw

[GIT PULL 2/2] more dts changes for omaps for v5.1

From: "Tony Lindgren" <[email protected]>

The following changes since commit b4c30df0eb354d8e081132b7b7449f6d17619614:

ARM: dts: omap4-sdp: Make ethernet working even if booted with latest u-boot (2019-01-24 08:23:43 -0800)

are available in the Git repository at:

git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap tags/omap-for-v5.1/dt-pt2-signed

for you to fetch changes up to 947b7802597106dcbef2ddca23d386f9339ba334:

ARM: dts: omap3-gta04: declare backlight in lcd node (2019-02-12 10:52:25 -0800)

----------------------------------------------------------------
More dts changes for omaps

We add support for Bosch Guardian am335x device, and configure more devices like GNSS and LCD backlight for omap3-gta04. And we replace the wlcore binding documentation URL with a local file that we have.

----------------------------------------------------------------
Andreas Kemnade (4):
ARM: dts: gta04: add pinctrl settings for wkup domain
ARM: dts: gta04: add ldo 3v3 regulator
ARM: dts: gta04: add gps support
ARM: dts: omap3-gta04: declare backlight in lcd node

Jonathan Neuschäfer (1):
ARM: dts: omap3-gta04a5: Replace LXR reference with a local one

Martyn Welch (1):
ARM: dts: am335x: Add support for Bosch Guardian

 arch/arm/boot/dts/Makefile            |   1 +
 arch/arm/boot/dts/am335x-guardian.dts | 511 ++++++++++++++++++++++++++++++++++
 arch/arm/boot/dts/omap3-gta04.dtsi    |  39 ++-
 arch/arm/boot/dts/omap3-gta04a5.dts   |   2 +-
 4 files changed, 551 insertions(+), 2 deletions(-)
 create mode 100644 arch/arm/boot/dts/am335x-guardian.dts

_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

#2 lore raw

Re: [GIT PULL 2/2] more dts changes for omaps for v5.1

Quoted 13 lines · Tony Lindgren

From: "Tony Lindgren" <[email protected]>

The following changes since commit b4c30df0eb354d8e081132b7b7449f6d17619614:

ARM: dts: omap4-sdp: Make ethernet working even if booted with latest u-boot (2019-01-24 08:23:43 -0800)

are available in the Git repository at:

git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap tags/omap-for-v5.1/dt-pt2-signed

for you to fetch changes up to 947b7802597106dcbef2ddca23d386f9339ba334:

Quoted 8 lines

ARM: dts: omap3-gta04: declare backlight in lcd node (2019-02-12 10:52:25 -0800)

----------------------------------------------------------------
More dts changes for omaps

We add support for Bosch Guardian am335x device, and configure more devices like GNSS and LCD backlight for omap3-gta04. And we replace the wlcore binding documentation URL with a local file that we have.

Pulled into arm/dt, thanks!

Arnd

#3 lore raw

Re: [GIT PULL 2/2] more dts changes for omaps for v5.1

Quoted 17 lines · Arnd Bergmann
Quoted 15 lines · Tony Lindgren

From: "Tony Lindgren" <[email protected]>

The following changes since commit b4c30df0eb354d8e081132b7b7449f6d17619614:

ARM: dts: omap4-sdp: Make ethernet working even if booted with latest u-boot (2019-01-24 08:23:43 -0800)

are available in the Git repository at:

git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap tags/omap-for-v5.1/dt-pt2-signed

for you to fetch changes up to 947b7802597106dcbef2ddca23d386f9339ba334:

ARM: dts: omap3-gta04: declare backlight in lcd node (2019-02-12 10:52:25 -0800)

Quoted 9 lines
Quoted 6 lines

----------------------------------------------------------------
More dts changes for omaps

We add support for Bosch Guardian am335x device, and configure more devices like GNSS and LCD backlight for omap3-gta04. And we replace the wlcore binding documentation URL with a local file that we have.

Pulled into arm/dt, thanks!

During routine checks, I came across these gta04 warnings:

../arch/arm/boot/dts/omap3-gta04.dtsi:757.7-764.4: Warning (graph_port): /ocp@68000000/dss@48050000/encoder@48050c00/port: graph node unit address error, expected "0" ../arch/arm/boot/dts/omap3-gta04.dtsi:757.7-764.4: Warning (graph_port): /ocp@68000000/dss@48050000/encoder@48050c00/port: graph node unit address error, expected "0" ../arch/arm/boot/dts/omap3-gta04.dtsi:757.7-764.4: Warning (graph_port): /ocp@68000000/dss@48050000/encoder@48050c00/port: graph node unit address error, expected "0" ../arch/arm/boot/dts/omap3-gta04.dtsi:757.7-764.4: Warning (graph_port): /ocp@68000000/dss@48050000/encoder@48050c00/port: graph node unit address error, expected "0"

Can you have a look and send a fix?

Arnd

#7 lore raw
In reply to Tony Lindgren
Quoted 9 lines · Tony Lindgren

----------------------------------------------------------------
Defconfig changes for omaps

Drop PROVE_LOCKING as it should not be enabled in the defconfig. It causes quite a bit overhead as noted in the patch description.

Then let's update omap2plus_defconfig for dropped options and moved options. That way makesavedefconfig can actually be used to generate patches against omap2plus_defconfig.

Thanks a lot for doing it this thoroughly, pulled into arm/defconfigs,

Arnd

#4 lore raw

Re: [GIT PULL 2/2] more dts changes for omaps for v5.1

In reply to Arnd Bergmann
Quoted 16 lines · Arnd Bergmann

On Fri, Feb 15, 2019 at 4:21 PM Arnd Bergmann <[email protected]> wrote:
During routine checks, I came across these gta04 warnings:

../arch/arm/boot/dts/omap3-gta04.dtsi:757.7-764.4: Warning (graph_port): /ocp@68000000/dss@48050000/encoder@48050c00/port: graph node unit address error, expected "0" ../arch/arm/boot/dts/omap3-gta04.dtsi:757.7-764.4: Warning (graph_port): /ocp@68000000/dss@48050000/encoder@48050c00/port: graph node unit address error, expected "0" ../arch/arm/boot/dts/omap3-gta04.dtsi:757.7-764.4: Warning (graph_port): /ocp@68000000/dss@48050000/encoder@48050c00/port: graph node unit address error, expected "0" ../arch/arm/boot/dts/omap3-gta04.dtsi:757.7-764.4: Warning (graph_port): /ocp@68000000/dss@48050000/encoder@48050c00/port: graph node unit address error, expected "0"

Quoted 1 line

Can you have a look and send a fix?

Hmm sounds like that's because the branch is based on v5.0-rc1 that is still missing already merged commit 5b90df44fd9b ("ARM: dts: omap3-gta04: Fix graph_port warning").

Regards,

Tony

#5 lore raw

Re: [GIT PULL 2/2] more dts changes for omaps for v5.1

Quoted 18 lines · Tony Lindgren
Quoted 16 lines · Arnd Bergmann

On Fri, Feb 15, 2019 at 4:21 PM Arnd Bergmann <[email protected]> wrote:
During routine checks, I came across these gta04 warnings:

../arch/arm/boot/dts/omap3-gta04.dtsi:757.7-764.4: Warning (graph_port): /ocp@68000000/dss@48050000/encoder@48050c00/port: graph node unit address error, expected "0" ../arch/arm/boot/dts/omap3-gta04.dtsi:757.7-764.4: Warning (graph_port): /ocp@68000000/dss@48050000/encoder@48050c00/port: graph node unit address error, expected "0" ../arch/arm/boot/dts/omap3-gta04.dtsi:757.7-764.4: Warning (graph_port): /ocp@68000000/dss@48050000/encoder@48050c00/port: graph node unit address error, expected "0" ../arch/arm/boot/dts/omap3-gta04.dtsi:757.7-764.4: Warning (graph_port): /ocp@68000000/dss@48050000/encoder@48050c00/port: graph node unit address error, expected "0"

Quoted 5 lines
Quoted 1 line

Can you have a look and send a fix?

Hmm sounds like that's because the branch is based on v5.0-rc1 that is still missing already merged commit 5b90df44fd9b ("ARM: dts: omap3-gta04: Fix graph_port warning").

Ok, got it. Everything's fine then, sorry for my confusion.

Arnd

#6 lore raw

Re: [GIT PULL 2/2] more dts changes for omaps for v5.1

Quoted 19 lines · Arnd Bergmann
Quoted 18 lines · Tony Lindgren
Quoted 16 lines · Arnd Bergmann

On Fri, Feb 15, 2019 at 4:21 PM Arnd Bergmann <[email protected]> wrote:
During routine checks, I came across these gta04 warnings:

../arch/arm/boot/dts/omap3-gta04.dtsi:757.7-764.4: Warning (graph_port): /ocp@68000000/dss@48050000/encoder@48050c00/port: graph node unit address error, expected "0" ../arch/arm/boot/dts/omap3-gta04.dtsi:757.7-764.4: Warning (graph_port): /ocp@68000000/dss@48050000/encoder@48050c00/port: graph node unit address error, expected "0" ../arch/arm/boot/dts/omap3-gta04.dtsi:757.7-764.4: Warning (graph_port): /ocp@68000000/dss@48050000/encoder@48050c00/port: graph node unit address error, expected "0" ../arch/arm/boot/dts/omap3-gta04.dtsi:757.7-764.4: Warning (graph_port): /ocp@68000000/dss@48050000/encoder@48050c00/port: graph node unit address error, expected "0"

Quoted 7 lines
Quoted 5 lines
Quoted 1 line

Can you have a look and send a fix?

Hmm sounds like that's because the branch is based on v5.0-rc1 that is still missing already merged commit 5b90df44fd9b ("ARM: dts: omap3-gta04: Fix graph_port warning").

Ok, got it. Everything's fine then, sorry for my confusion.

OK good to hear thanks,

Tony