A new batch of synopsis conversion

index cb8f5e2700..6b97776bc3 100644
@@ -41,7 +41,7 @@
 `imap.authMethod`::
 	Specify the authentication method for authenticating with the IMAP server.
 	If Git was built with the NO_CURL option, or if your curl version is older
-	than 7.34.0, or if you're running git-imap-send with the `--no-curl`
+	than 7.34.0, or if you're running `git-imap-send` with the `--no-curl`
 	option, the only supported methods are `PLAIN`, `CRAM-MD5`, `OAUTHBEARER`
 	and `XOAUTH2`. If this is not set then `git imap-send` uses the basic IMAP
 	plaintext `LOGIN` command.

index 538b91afc0..dd1e0a3718 100644
@@ -192,7 +192,10 @@ supports only `XOAUTH2` as the mechanism.
 
 Once the commits are ready to be sent, run the following command:
 
-  $ git format-patch --cover-letter -M --stdout origin/master | git imap-send
+
+---------
+$ git format-patch --cover-letter -M --stdout origin/master | git imap-send
+---------
 
 Just make sure to disable line wrapping in the email client (Gmail's web
 interface will wrap lines no matter what, so you need to use a real

@@ -217,7 +220,7 @@ users may wish to visit this web page for more information:
 
 SEE ALSO
 --------
-linkgit:git-format-patch[1], linkgit:git-send-email[1], mbox(5)
+linkgit:git-format-patch[1], linkgit:git-send-email[1], `mbox`(5)
 
 GIT
 ---

index c8242e2462..e605d28678 100644
@@ -13,8 +13,8 @@ endif::git-diff[]
 endif::git-format-patch[]
 
 ifdef::git-format-patch[]
--p::
---no-stat::
+`-p`::
+`--no-stat`::
 	Generate plain patches without any diffstats.
 endif::git-format-patch[]
 

@@ -893,8 +893,8 @@ endif::git-format-patch[]
 	reverted with `--ita-visible-in-index`. Both options are
 	experimental and could be removed in future.
 
---max-depth=<depth>::
-	For each pathspec given on command line, descend at most `<depth>`
+`--max-depth=<depth>`::
+	For each pathspec given on command line, descend at most _<depth>_
 	levels of directories. A value of `-1` means no limit.
 	Cannot be combined with wildcards in the pathspec.
 	Given a tree containing `foo/bar/baz`, the following list shows the

596 lines not on this page · raw message

index 1d700559b4..5499f91036 100644
@@ -1,25 +1,25 @@
-sendemail.identity::
+`sendemail.identity`::
 	A configuration identity. When given, causes values in the
 	`sendemail.<identity>` subsection to take precedence over
 	values in the `sendemail` section. The default identity is
 	the value of `sendemail.identity`.
 
-sendemail.smtpEncryption::
+`sendemail.smtpEncryption`::
 	See linkgit:git-send-email[1] for description.  Note that this
 	setting is not subject to the `identity` mechanism.
 
-sendemail.smtpSSLCertPath::
+`sendemail.smtpSSLCertPath`::
 	Path to ca-certificates (either a directory or a single file).
 	Set it to an empty string to disable certificate verification.
 
-sendemail.smtpSSLClientCert::
+`sendemail.smtpSSLClientCert`::
 	Path to the client certificate file to present if requested by the
 	server. This is required when the server is set up to verify client
 	certificates. If the corresponding private key is not included in the
 	file, it must be supplied using `sendemail.smtpSSLClientKey` or the
 	`--smtp-ssl-client-key` option.
 
-sendemail.smtpSSLClientKey::
+`sendemail.smtpSSLClientKey`::
 	Path to the client private key file that corresponds to the client
 	certificate. To avoid misconfiguration, this configuration must be used
 	in conjunction with `sendemail.smtpSSLClientCert` or the

@@ -28,45 +28,45 @@ sendemail.smtpSSLClientKey::
 	the certificate. Visit https://metacpan.org/pod/IO::Socket::SSL for more
 	details.
 
-sendemail.<identity>.*::
-	Identity-specific versions of the `sendemail.*` parameters
+`sendemail.<identity>.<config>`::
+	Identity-specific versions of the `sendemail.<config>` parameters
 	found below, taking precedence over those when this
 	identity is selected, through either the command-line or
 	`sendemail.identity`.
 
-sendemail.multiEdit::
+`sendemail.multiEdit`::
 	If `true` (default), a single editor instance will be spawned to edit
 	files you have to edit (patches when `--annotate` is used, and the
 	summary when `--compose` is used). If `false`, files will be edited one
 	after the other, spawning a new editor each time.
 
-sendemail.confirm::
+`sendemail.confirm`::
 	Sets the default for whether to confirm before sending. Must be
 	one of `always`, `never`, `cc`, `compose`, or `auto`. See `--confirm`
 	in the linkgit:git-send-email[1] documentation for the meaning of these
 	values.
 
-sendemail.mailmap::
+`sendemail.mailmap`::
 	If `true`, makes linkgit:git-send-email[1] assume `--mailmap`,
 	otherwise assume `--no-mailmap`. `False` by default.
 
-sendemail.mailmap.file::
+`sendemail.mailmap.file`::
 	The location of a linkgit:git-send-email[1] specific augmenting
 	mailmap file. The default mailmap and `mailmap.file` are loaded
 	first. Thus, entries in this file take precedence over entries in
 	the default mailmap locations. See linkgit:gitmailmap[5].
 
-sendemail.mailmap.blob::
+`sendemail.mailmap.blob`::
 	Like `sendemail.mailmap.file`, but consider the value as a reference
 	to a blob in the repository. Entries in `sendemail.mailmap.file`
 	take precedence over entries here. See linkgit:gitmailmap[5].
 
-sendemail.aliasesFile::
+`sendemail.aliasesFile`::
 	To avoid typing long email addresses, point this to one or more
 	email aliases files.  You must also supply `sendemail.aliasFileType`.
 
-sendemail.aliasFileType::
-	Format of the file(s) specified in sendemail.aliasesFile. Must be
+`sendemail.aliasFileType`::
+	Format of the file(s) specified in `sendemail.aliasesFile`. Must be
 	one of `mutt`, `mailrc`, `pine`, `elm`, `gnus`, or `sendmail`.
 +
 What an alias file in each format looks like can be found in

@@ -75,7 +75,7 @@ differences and limitations from the standard formats are
 described below:
 +
 --
-sendmail;;
+`sendmail`;;
 *	Quoted aliases and quoted addresses are not supported: lines that
 	contain a `"` symbol are ignored.
 *	Redirection to a file (`/path/name`) or pipe (`|command`) is not

@@ -85,54 +85,54 @@ sendmail;;
 	explicitly unsupported constructs, and any other lines that are not
 	recognized by the parser.
 --
-sendemail.annotate::
-sendemail.bcc::
-sendemail.cc::
-sendemail.ccCmd::
-sendemail.chainReplyTo::
-sendemail.envelopeSender::
-sendemail.from::
-sendemail.headerCmd::
-sendemail.signedOffByCc::
-sendemail.smtpPass::
-sendemail.suppressCc::
-sendemail.suppressFrom::
-sendemail.to::
-sendemail.toCmd::
-sendemail.smtpDomain::
-sendemail.smtpServer::
-sendemail.smtpServerPort::
-sendemail.smtpServerOption::
-sendemail.smtpUser::
-sendemail.imapSentFolder::
-sendemail.useImapOnly::
-sendemail.thread::
-sendemail.transferEncoding::
-sendemail.validate::
-sendemail.xmailer::
+`sendemail.annotate`::
+`sendemail.bcc`::
+`sendemail.cc`::
+`sendemail.ccCmd`::
+`sendemail.chainReplyTo`::
+`sendemail.envelopeSender`::
+`sendemail.from`::
+`sendemail.headerCmd`::
+`sendemail.signedOffByCc`::
+`sendemail.smtpPass`::
+`sendemail.suppressCc`::
+`sendemail.suppressFrom`::
+`sendemail.to`::
+`sendemail.toCmd`::
+`sendemail.smtpDomain`::
+`sendemail.smtpServer`::
+`sendemail.smtpServerPort`::
+`sendemail.smtpServerOption`::
+`sendemail.smtpUser`::
+`sendemail.imapSentFolder`::
+`sendemail.useImapOnly`::
+`sendemail.thread`::
+`sendemail.transferEncoding`::
+`sendemail.validate`::
+`sendemail.xmailer`::
 	These configuration variables all provide a default for
 	linkgit:git-send-email[1] command-line options. See its
 	documentation for details.
 
-sendemail.outlookidfix::
+`sendemail.outlookidfix`::
 	If `true`, makes linkgit:git-send-email[1] assume `--outlook-id-fix`,
 	and if `false` assume `--no-outlook-id-fix`. If not specified, it will
 	behave the same way as if `--outlook-id-fix` is not specified.
 
-sendemail.signedOffCc (deprecated)::
+`sendemail.signedOffCc` (deprecated)::
 	Deprecated alias for `sendemail.signedOffByCc`.
 
-sendemail.smtpBatchSize::
+`sendemail.smtpBatchSize`::
 	Number of messages to be sent per connection, after that a relogin
 	will happen.  If the value is `0` or undefined, send all messages in
 	one connection.
 	See also the `--batch-size` option of linkgit:git-send-email[1].
 
-sendemail.smtpReloginDelay::
+`sendemail.smtpReloginDelay`::
 	Seconds to wait before reconnecting to the smtp server.
 	See also the `--relogin-delay` option of linkgit:git-send-email[1].
 
-sendemail.forbidSendmailVariables::
+`sendemail.forbidSendmailVariables`::
 	To avoid common misconfiguration mistakes, linkgit:git-send-email[1]
 	will abort with a warning if any configuration options for `sendmail`
 	exist. Set this variable to bypass the check.

473 lines not on this page · raw message

index 15dcbb6d91..8b6642b312 100644
@@ -7,8 +7,8 @@ git-request-pull - Generates a summary of pending changes
 
 SYNOPSIS
 --------
-[verse]
-'git request-pull' [-p] <start> <URL> [<end>]
+[synopsis]
+git request-pull [-p] <start> <URL> [<end>]
 
 DESCRIPTION
 -----------

@@ -19,28 +19,28 @@ begins with the branch description, summarizes
 the changes, and indicates from where they can be pulled.
 
 The upstream project is expected to have the commit named by
-`<start>` and the output asks it to integrate the changes you made
-since that commit, up to the commit named by `<end>`, by visiting
-the repository named by `<URL>`.
+_<start>_ and the output asks it to integrate the changes you made
+since that commit, up to the commit named by _<end>_, by visiting
+the repository named by _<URL>_.
 
 
 OPTIONS
 -------
--p::
+`-p`::
 	Include patch text in the output.
 
-<start>::
+_<start>_::
 	Commit to start at.  This names a commit that is already in
 	the upstream history.
 
-<URL>::
+_<URL>_::
 	The repository URL to be pulled from.
 
-<end>::
-	Commit to end at (defaults to HEAD).  This names the commit
+_<end>_::
+	Commit to end at (defaults to `HEAD`).  This names the commit
 	at the tip of the history you are asking to be pulled.
 +
-When the repository named by `<URL>` has the commit at a tip of a
+When the repository named by _<URL>_ has the commit at a tip of a
 ref that is different from the ref you have locally, you can use the
 `<local>:<remote>` syntax, to have its local name, a colon `:`, and
 its remote name.

@@ -54,11 +54,15 @@ the `v1.0` release, and want it to be integrated into the project.
 First you push that change to your public repository for others to
 see:
 
-	git push https://git.ko.xz/project master
+-----
+git push https://git.ko.xz/project master
+-----
 
 Then, you run this command:
 
-	git request-pull v1.0 https://git.ko.xz/project master
+------
+git request-pull v1.0 https://git.ko.xz/project master
+------
 
 which will produce a request to the upstream, summarizing the
 changes between the `v1.0` release and your `master`, to pull it

@@ -67,11 +71,15 @@ from your public repository.
 If you pushed your change to a branch whose name is different from
 the one you have locally, e.g.
 
-	git push https://git.ko.xz/project master:for-linus
+-----
+git push https://git.ko.xz/project master:for-linus
+-----
 
 then you can ask that to be pulled with
 
-	git request-pull v1.0 https://git.ko.xz/project master:for-linus
+-----
+git request-pull v1.0 https://git.ko.xz/project master:for-linus
+-----
 
 
 GIT

index cb8f5e2700..6b97776bc3 100644
@@ -41,7 +41,7 @@
 `imap.authMethod`::
 	Specify the authentication method for authenticating with the IMAP server.
 	If Git was built with the NO_CURL option, or if your curl version is older
-	than 7.34.0, or if you're running git-imap-send with the `--no-curl`
+	than 7.34.0, or if you're running `git-imap-send` with the `--no-curl`
 	option, the only supported methods are `PLAIN`, `CRAM-MD5`, `OAUTHBEARER`
 	and `XOAUTH2`. If this is not set then `git imap-send` uses the basic IMAP
 	plaintext `LOGIN` command.

index 538b91afc0..1814d94491 100644
@@ -24,9 +24,9 @@ that order.
 
 Typical usage is something like:
 
-------
+----
 $ git format-patch --signoff --stdout --attach origin | git imap-send
-------
+----
 
 
 OPTIONS

@@ -138,13 +138,13 @@ have set up) may not be verified correctly.
 
 Using Gmail's IMAP interface:
 
----------
+----
 [imap]
     folder = "[Gmail]/Drafts"
     host = imaps://imap.gmail.com
     user = [email protected]
     port = 993
----------
+----
 
 Gmail does not allow using your regular password for `git imap-send`.
 If you have multi-factor authentication set up on your Gmail account, you

@@ -167,32 +167,34 @@ than using app-specific passwords, and also does not enforce the need of
 having multi-factor authentication. You will have to use an OAuth2.0
 access token in place of your password when using this authentication.
 
----------
+----
 [imap]
     folder = "[Gmail]/Drafts"
     host = imaps://imap.gmail.com
     user = [email protected]
     port = 993
     authmethod = OAUTHBEARER
----------
+----
 
 Using Outlook's IMAP interface:
 
 Unlike Gmail, Outlook only supports OAuth2.0 based authentication. Also, it
 supports only `XOAUTH2` as the mechanism.
 
----------
+----
 [imap]
     folder = "Drafts"
     host = imaps://outlook.office365.com
     user = [email protected]
     port = 993
     authmethod = XOAUTH2
----------
+----
 
 Once the commits are ready to be sent, run the following command:
 
-  $ git format-patch --cover-letter -M --stdout origin/master | git imap-send
+----
+$ git format-patch --cover-letter -M --stdout origin/master | git imap-send
+----
 
 Just make sure to disable line wrapping in the email client (Gmail's web
 interface will wrap lines no matter what, so you need to use a real

@@ -217,7 +219,7 @@ users may wish to visit this web page for more information:
 
 SEE ALSO
 --------
-linkgit:git-format-patch[1], linkgit:git-send-email[1], mbox(5)
+linkgit:git-format-patch[1], linkgit:git-send-email[1], `mbox`(5)
 
 GIT
 ---

index c8242e2462..e605d28678 100644
@@ -13,8 +13,8 @@ endif::git-diff[]
 endif::git-format-patch[]
 
 ifdef::git-format-patch[]
--p::
---no-stat::
+`-p`::
+`--no-stat`::
 	Generate plain patches without any diffstats.
 endif::git-format-patch[]
 

@@ -893,8 +893,8 @@ endif::git-format-patch[]
 	reverted with `--ita-visible-in-index`. Both options are
 	experimental and could be removed in future.
 
---max-depth=<depth>::
-	For each pathspec given on command line, descend at most `<depth>`
+`--max-depth=<depth>`::
+	For each pathspec given on command line, descend at most _<depth>_
 	levels of directories. A value of `-1` means no limit.
 	Cannot be combined with wildcards in the pathspec.
 	Given a tree containing `foo/bar/baz`, the following list shows the

673 lines not on this page · raw message

index 1d700559b4..5499f91036 100644
@@ -1,25 +1,25 @@
-sendemail.identity::
+`sendemail.identity`::
 	A configuration identity. When given, causes values in the
 	`sendemail.<identity>` subsection to take precedence over
 	values in the `sendemail` section. The default identity is
 	the value of `sendemail.identity`.
 
-sendemail.smtpEncryption::
+`sendemail.smtpEncryption`::
 	See linkgit:git-send-email[1] for description.  Note that this
 	setting is not subject to the `identity` mechanism.
 
-sendemail.smtpSSLCertPath::
+`sendemail.smtpSSLCertPath`::
 	Path to ca-certificates (either a directory or a single file).
 	Set it to an empty string to disable certificate verification.
 
-sendemail.smtpSSLClientCert::
+`sendemail.smtpSSLClientCert`::
 	Path to the client certificate file to present if requested by the
 	server. This is required when the server is set up to verify client
 	certificates. If the corresponding private key is not included in the
 	file, it must be supplied using `sendemail.smtpSSLClientKey` or the
 	`--smtp-ssl-client-key` option.
 
-sendemail.smtpSSLClientKey::
+`sendemail.smtpSSLClientKey`::
 	Path to the client private key file that corresponds to the client
 	certificate. To avoid misconfiguration, this configuration must be used
 	in conjunction with `sendemail.smtpSSLClientCert` or the

@@ -28,45 +28,45 @@ sendemail.smtpSSLClientKey::
 	the certificate. Visit https://metacpan.org/pod/IO::Socket::SSL for more
 	details.
 
-sendemail.<identity>.*::
-	Identity-specific versions of the `sendemail.*` parameters
+`sendemail.<identity>.<config>`::
+	Identity-specific versions of the `sendemail.<config>` parameters
 	found below, taking precedence over those when this
 	identity is selected, through either the command-line or
 	`sendemail.identity`.
 
-sendemail.multiEdit::
+`sendemail.multiEdit`::
 	If `true` (default), a single editor instance will be spawned to edit
 	files you have to edit (patches when `--annotate` is used, and the
 	summary when `--compose` is used). If `false`, files will be edited one
 	after the other, spawning a new editor each time.
 
-sendemail.confirm::
+`sendemail.confirm`::
 	Sets the default for whether to confirm before sending. Must be
 	one of `always`, `never`, `cc`, `compose`, or `auto`. See `--confirm`
 	in the linkgit:git-send-email[1] documentation for the meaning of these
 	values.
 
-sendemail.mailmap::
+`sendemail.mailmap`::
 	If `true`, makes linkgit:git-send-email[1] assume `--mailmap`,
 	otherwise assume `--no-mailmap`. `False` by default.
 
-sendemail.mailmap.file::
+`sendemail.mailmap.file`::
 	The location of a linkgit:git-send-email[1] specific augmenting
 	mailmap file. The default mailmap and `mailmap.file` are loaded
 	first. Thus, entries in this file take precedence over entries in
 	the default mailmap locations. See linkgit:gitmailmap[5].
 
-sendemail.mailmap.blob::
+`sendemail.mailmap.blob`::
 	Like `sendemail.mailmap.file`, but consider the value as a reference
 	to a blob in the repository. Entries in `sendemail.mailmap.file`
 	take precedence over entries here. See linkgit:gitmailmap[5].
 
-sendemail.aliasesFile::
+`sendemail.aliasesFile`::
 	To avoid typing long email addresses, point this to one or more
 	email aliases files.  You must also supply `sendemail.aliasFileType`.
 
-sendemail.aliasFileType::
-	Format of the file(s) specified in sendemail.aliasesFile. Must be
+`sendemail.aliasFileType`::
+	Format of the file(s) specified in `sendemail.aliasesFile`. Must be
 	one of `mutt`, `mailrc`, `pine`, `elm`, `gnus`, or `sendmail`.
 +
 What an alias file in each format looks like can be found in

@@ -75,7 +75,7 @@ differences and limitations from the standard formats are
 described below:
 +
 --
-sendmail;;
+`sendmail`;;
 *	Quoted aliases and quoted addresses are not supported: lines that
 	contain a `"` symbol are ignored.
 *	Redirection to a file (`/path/name`) or pipe (`|command`) is not

@@ -85,54 +85,54 @@ sendmail;;
 	explicitly unsupported constructs, and any other lines that are not
 	recognized by the parser.
 --
-sendemail.annotate::
-sendemail.bcc::
-sendemail.cc::
-sendemail.ccCmd::
-sendemail.chainReplyTo::
-sendemail.envelopeSender::
-sendemail.from::
-sendemail.headerCmd::
-sendemail.signedOffByCc::
-sendemail.smtpPass::
-sendemail.suppressCc::
-sendemail.suppressFrom::
-sendemail.to::
-sendemail.toCmd::
-sendemail.smtpDomain::
-sendemail.smtpServer::
-sendemail.smtpServerPort::
-sendemail.smtpServerOption::
-sendemail.smtpUser::
-sendemail.imapSentFolder::
-sendemail.useImapOnly::
-sendemail.thread::
-sendemail.transferEncoding::
-sendemail.validate::
-sendemail.xmailer::
+`sendemail.annotate`::
+`sendemail.bcc`::
+`sendemail.cc`::
+`sendemail.ccCmd`::
+`sendemail.chainReplyTo`::
+`sendemail.envelopeSender`::
+`sendemail.from`::
+`sendemail.headerCmd`::
+`sendemail.signedOffByCc`::
+`sendemail.smtpPass`::
+`sendemail.suppressCc`::
+`sendemail.suppressFrom`::
+`sendemail.to`::
+`sendemail.toCmd`::
+`sendemail.smtpDomain`::
+`sendemail.smtpServer`::
+`sendemail.smtpServerPort`::
+`sendemail.smtpServerOption`::
+`sendemail.smtpUser`::
+`sendemail.imapSentFolder`::
+`sendemail.useImapOnly`::
+`sendemail.thread`::
+`sendemail.transferEncoding`::
+`sendemail.validate`::
+`sendemail.xmailer`::
 	These configuration variables all provide a default for
 	linkgit:git-send-email[1] command-line options. See its
 	documentation for details.
 
-sendemail.outlookidfix::
+`sendemail.outlookidfix`::
 	If `true`, makes linkgit:git-send-email[1] assume `--outlook-id-fix`,
 	and if `false` assume `--no-outlook-id-fix`. If not specified, it will
 	behave the same way as if `--outlook-id-fix` is not specified.
 
-sendemail.signedOffCc (deprecated)::
+`sendemail.signedOffCc` (deprecated)::
 	Deprecated alias for `sendemail.signedOffByCc`.
 
-sendemail.smtpBatchSize::
+`sendemail.smtpBatchSize`::
 	Number of messages to be sent per connection, after that a relogin
 	will happen.  If the value is `0` or undefined, send all messages in
 	one connection.
 	See also the `--batch-size` option of linkgit:git-send-email[1].
 
-sendemail.smtpReloginDelay::
+`sendemail.smtpReloginDelay`::
 	Seconds to wait before reconnecting to the smtp server.
 	See also the `--relogin-delay` option of linkgit:git-send-email[1].
 
-sendemail.forbidSendmailVariables::
+`sendemail.forbidSendmailVariables`::
 	To avoid common misconfiguration mistakes, linkgit:git-send-email[1]
 	will abort with a warning if any configuration options for `sendmail`
 	exist. Set this variable to bypass the check.

473 lines not on this page · raw message

index 15dcbb6d91..8523c4e6bb 100644
@@ -7,8 +7,8 @@ git-request-pull - Generates a summary of pending changes
 
 SYNOPSIS
 --------
-[verse]
-'git request-pull' [-p] <start> <URL> [<end>]
+[synopsis]
+git request-pull [-p] <start> <URL> [<end>]
 
 DESCRIPTION
 -----------

@@ -19,28 +19,28 @@ begins with the branch description, summarizes
 the changes, and indicates from where they can be pulled.
 
 The upstream project is expected to have the commit named by
-`<start>` and the output asks it to integrate the changes you made
-since that commit, up to the commit named by `<end>`, by visiting
-the repository named by `<URL>`.
+_<start>_ and the output asks it to integrate the changes you made
+since that commit, up to the commit named by _<end>_, by visiting
+the repository named by _<URL>_.
 
 
 OPTIONS
 -------
--p::
+`-p`::
 	Include patch text in the output.
 
-<start>::
+_<start>_::
 	Commit to start at.  This names a commit that is already in
 	the upstream history.
 
-<URL>::
+_<URL>_::
 	The repository URL to be pulled from.
 
-<end>::
-	Commit to end at (defaults to HEAD).  This names the commit
+_<end>_::
+	Commit to end at (defaults to `HEAD`).  This names the commit
 	at the tip of the history you are asking to be pulled.
 +
-When the repository named by `<URL>` has the commit at a tip of a
+When the repository named by _<URL>_ has the commit at a tip of a
 ref that is different from the ref you have locally, you can use the
 `<local>:<remote>` syntax, to have its local name, a colon `:`, and
 its remote name.

@@ -54,11 +54,15 @@ the `v1.0` release, and want it to be integrated into the project.
 First you push that change to your public repository for others to
 see:
 
-	git push https://git.ko.xz/project master
+----
+git push https://git.ko.xz/project master
+----
 
 Then, you run this command:
 
-	git request-pull v1.0 https://git.ko.xz/project master
+----
+git request-pull v1.0 https://git.ko.xz/project master
+----
 
 which will produce a request to the upstream, summarizing the
 changes between the `v1.0` release and your `master`, to pull it

@@ -67,11 +71,15 @@ from your public repository.
 If you pushed your change to a branch whose name is different from
 the one you have locally, e.g.
 
-	git push https://git.ko.xz/project master:for-linus
+----
+git push https://git.ko.xz/project master:for-linus
+----
 
 then you can ask that to be pulled with
 
-	git request-pull v1.0 https://git.ko.xz/project master:for-linus
+----
+git request-pull v1.0 https://git.ko.xz/project master:for-linus
+----
 
 
 GIT