Duplicate IP scenario. Doable with iptables?
I have a somewhat odd scenario that requires the same pools of 192.168 IPs to be bound to eth1 and eth2 on the same machine. I need to NAT another pool of 10.x.x.x IPs bound to eth0 to these two pools of 192.168 IPs. The setup is as follows:
eth0:10.115.0.1/16 -> eth1:192.168.0.1/24
eth0:10.115.0.2/16 -> eth1:192.168.0.2/24
eth0:10.115.0.3/16 -> eth1:192.168.0.3/24
eth0:10.115.0.4/16 -> eth1:192.168.0.4/24
eth0:10.115.0.5/16 -> eth1:192.168.0.5/24
eth0:10.115.0.6/16 -> eth1:192.168.0.6/24
eth0:10.116.0.1/16 -> eth2:192.168.0.1/24
eth0:10.116.0.2/16 -> eth2:192.168.0.2/24
eth0:10.116.0.3/16 -> eth2:192.168.0.3/24
eth0:10.116.0.4/16 -> eth2:192.168.0.4/24
eth0:10.116.0.5/16 -> eth2:192.168.0.5/24
eth0:10.116.0.6/16 -> eth2:192.168.0.6/24
Suse 8.1 has no problem letting me bind the same IPs to eth1 and eth2, since eth1 and eth2 are not on the same physical network. However, I am having problems writing my NAT rules for this scenario.
Is this scenario doable under iptables?
TIA,
Kevin
Quoted 2 lines · Kevin Hilscher
I have a somewhat odd scenario that requires the same pools of 192.168 IPs to be bound to eth1 and eth2 on the same machine.
odd? no--it seems pretty much everyone has the same two problems these days:
1) multiple, overlapping network address ranges
2) an inability to search through mailing list archives
Quoted 18 lines
I need to NAT
another pool of 10.x.x.x IPs bound to eth0 to these two pools of 192.168 IPs. The setup is as follows:eth0:10.115.0.1/16 -> eth1:192.168.0.1/24
eth0:10.115.0.2/16 -> eth1:192.168.0.2/24
eth0:10.115.0.3/16 -> eth1:192.168.0.3/24
eth0:10.115.0.4/16 -> eth1:192.168.0.4/24
eth0:10.115.0.5/16 -> eth1:192.168.0.5/24
eth0:10.115.0.6/16 -> eth1:192.168.0.6/24eth0:10.116.0.1/16 -> eth2:192.168.0.1/24
eth0:10.116.0.2/16 -> eth2:192.168.0.2/24
eth0:10.116.0.3/16 -> eth2:192.168.0.3/24
eth0:10.116.0.4/16 -> eth2:192.168.0.4/24
eth0:10.116.0.5/16 -> eth2:192.168.0.5/24
eth0:10.116.0.6/16 -> eth2:192.168.0.6/24
Quoted 5 lines
Suse 8.1 has no problem letting me bind the same IPs to eth1 and eth2, since eth1 and eth2 are not on the same physical network. However, I am having problems writing my NAT rules for this scenario.
Is this scenario doable under iptables?
refer to:
http://marc.theaimsgroup.com/?l=netfilter&m=110027573811157&w=2
though Carry never reported back whether it worked or not--so YMMV, but it sure saves some typing... :-D
-j
--
"I hope I didn't brain my damage."
--The Simpsons
Quoted 23 lines · Kevin Hilscher
I have a somewhat odd scenario that requires the same pools of 192.168 IPs to be bound to eth1 and eth2 on the same machine. I need to NAT another pool of 10.x.x.x IPs bound to eth0 to these two pools of 192.168 IPs. The setup is as follows:
eth0:10.115.0.1/16 -> eth1:192.168.0.1/24
eth0:10.115.0.2/16 -> eth1:192.168.0.2/24
eth0:10.115.0.3/16 -> eth1:192.168.0.3/24
eth0:10.115.0.4/16 -> eth1:192.168.0.4/24
eth0:10.115.0.5/16 -> eth1:192.168.0.5/24
eth0:10.115.0.6/16 -> eth1:192.168.0.6/24eth0:10.116.0.1/16 -> eth2:192.168.0.1/24
eth0:10.116.0.2/16 -> eth2:192.168.0.2/24
eth0:10.116.0.3/16 -> eth2:192.168.0.3/24
eth0:10.116.0.4/16 -> eth2:192.168.0.4/24
eth0:10.116.0.5/16 -> eth2:192.168.0.5/24
eth0:10.116.0.6/16 -> eth2:192.168.0.6/24Suse 8.1 has no problem letting me bind the same IPs to eth1 and eth2, since eth1 and eth2 are not on the same physical network. However, I am having problems writing my NAT rules for this scenario.
Quoted 5 lines
Is this scenario doable under iptables?
TIA,
Kevin
Hmmm . . . that's an interesting one. Let's break it into SNAT and DNAT. I think you will be able to keep the packets straight in DNAT by specifying the inbound interface, e.g.,
iptables -t nat -A PREROUTING -i eth2 -d 192.168.0.1/24 -j DNAT --to-destination 10.116.0.1
On SNAT, we can keep the packets straight based upon source, e.g., iptables -t nat -A POSTROUTING -s 10.116.0.6 -j SNAT --to-source 192.168.0.6
but I'm not sure how one makes sure the packet goes out eth2 rather than eth1. I think the interface decision has already been made but I'm not sure. If it has been, I wonder if one could use policy routing in iproute2 to make it work. One could set up a rule to route to an interface based upon source. It might be worth a try. Good luck - John
Signature · 9 lines
John A. Sullivan III Chief Technology Officer Nexus Management +1 207-985-7880 [email protected] --- If you are interested in helping to develop a GPL enterprise class VPN/Firewall/Security device management console, please visit http://iscs.sourceforge.net