Skip to contentSkip to conversation

question about parameter settings.

DISCUSSION Don Gulotta 2 participants 2 messages Jan 6, 2005

lore
Share & tools
lore
#0 lore raw

I have a question about the parameters that need to be passed to CS46xx.
I am running Suse Linux 9.2 and it automatically finds the CS46xx but I
get no sound. I have looked at the Alsa documentation and the parameter lists but don't know what the actual values should be. I only see three to configure in Yast2 hardware config for the card yet I see 6 in the documentation. I get the last three to configure.

description: "Cirrus Logic Sound Fusion CS46XX"

author: "Jaroslav Kysela "

license: "GPL"

parm: index int array (min = 1, max = 8), description "Index value for the CS46xx soundcard."

parm: id string array (min = 1, max = 8), description "ID string for the CS46xx soundcard."

parm: enable int array (min = 1, max = 8), description "Enable CS46xx soundcard."

parm: external_amp int array (min = 1, max = 8), description "Force to enable external amplifer."

parm: thinkpad int array (min = 1, max = 8), description "Force to enable Thinkpad's CLKRUN control."

parm: mmap_valid int array (min = 1, max = 8), description "Support OSS mmap."

Don Gulotta
Member Technical Staff
MCSE W2k,MCNE,CCNA,Unix Admin
Computer Sciences Corporation

1 Tower Lane, Suite 400
Oakbrook Terrace, IL 60181 USA
Direct: 630.990.4867
Fax: 630.990.4832
Email: [email protected]
Aim: dlg2609

-------------------------------------------------------
The SF.Net email is sponsored by: Beat the post-holiday blues Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek. It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt

#1 lore raw
Quoted 6 lines · Don Gulotta

I have a question about the parameters that need to be passed to CS46xx.
I am running Suse Linux 9.2 and it automatically finds the CS46xx but I
get no sound. I have looked at the Alsa documentation and the parameter lists but don't know what the actual values should be. I only see three to configure in Yast2 hardware config for the card yet I see 6 in the documentation. I get the last three to configure.

You really should not need to pass any parameters. Are you sure it's not a mixer settings issue?

Lee

-------------------------------------------------------
The SF.Net email is sponsored by: Beat the post-holiday blues Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek. It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt