via8233-midi
At Mon, 30 Sep 2002 17:56:17 +0200 (CEST),
Quoted 17 lines · Wolfgang Hamann
Quoted 17 lines
Quoted 17 lines
At Sat, 28 Sep 2002 10:31:49 +0200 (CEST),
Quoted 6 lines · Wolfgang Hamann
Hi,
thanks for your reply - unfortunately it did not work, although the port and irq could be configured in the main board settings. Since this is not my own computer, I decided to put in an extra blaster to get a midi port
did you access to the second midi device?
if you set up the mpu401 with snd-mpu401 driver, eventually the device is assigned to hw:1 (corresponding to/dev/midi01on OSS), not to hw:0 (/dev/midi00or/dev/midion OSS).
Quoted 6 lines
Quoted 2 lines
Quoted 2 lines
Takashi
Hi,
the mpu driver refused to accept the configured port and and irq at all.
what did the driver say? if it's "MPU401 not detected at xxx", then no chance. otherwise, it can be a configuration failure.
Takashi
-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf