drm/i915: Suppress hotplug work during PM suspend/resume
Subsystems (2)
PATCH 1/1 drm/i915: Suppress hotplug work during PM suspend/resume
The hotplug work can be still kicked off via irq during PM, and this may conflict with the resume procedure. For example, eDP on SNB machine shows WARNING like below during the resume:
WARNING: at /usr/src/packages/BUILD/kernel-default-3.0.13/linux-3.0/drivers/gpu/drm/i915/intel_dp.c:332 intel_dp_check_edp+0x73/0xd0 [i915]() Hardware name: HP Z1 Workstation eDP powered off while attempting aux channel communication. Supported: Yes Pid: 3210, comm: kworker/u:49 Tainted: G C N 3.0.13-0.27-default #1 Call Trace: [<ffffffff810048b5>] dump_trace+0x75/0x300 [<ffffffff8143ea0f>] dump_stack+0x69/0x6f [<ffffffff81059e2b>] warn_slowpath_common+0x7b/0xc0 [<ffffffff81059f25>] warn_slowpath_fmt+0x45/0x50 [<ffffffffa01fa9f3>] intel_dp_check_edp+0x73/0xd0 [i915] [<ffffffffa01fae4b>] intel_dp_aux_native_write+0x1b/0xe0 [i915] [<ffffffffa01fb033>] intel_dp_set_link_train+0x73/0xa0 [i915] [<ffffffffa01fb58e>] intel_dp_start_link_train+0x16e/0x400 [i915] [<ffffffffa01fbc6c>] intel_dp_complete_link_train+0x1fc/0x3d0 [i915] [<ffffffffa01fcf4c>] intel_dp_check_link_status+0x12c/0x1d0 [i915] [<ffffffffa01cf22e>] i915_hotplug_work_func+0x6e/0xa0 [i915] [<ffffffff810747bc>] process_one_work+0x16c/0x350 [<ffffffff8107734a>] worker_thread+0x17a/0x410 [<ffffffff8107b676>] kthread+0x96/0xa0 [<ffffffff8144a7c4>] kernel_thread_helper+0x4/0x10 DWARF2 unwinder stuck at kernel_thread_helper+0x4/0x10
This patch adds a flag to disable the hotplug during PM operation for avoiding such a race.
---
It's a pretty simplistic solution that just ignores the hotplug work. We may keep some pending flag and process it later, if ignoring the event matters...
drivers/gpu/drm/i915/i915_drv.c | 2 ++ drivers/gpu/drm/i915/i915_drv.h | 1 + drivers/gpu/drm/i915/i915_irq.c | 9 ++++++--- 3 files changed, 9 insertions(+), 3 deletions(-)
drivers/gpu/drm/i915/i915_drv.c +2 -0
@@ -471,6 +471,7 @@ static int i915_drm_freeze(struct drm_device *dev)/* Modeset on resume, not lid events */ dev_priv->modeset_on_lid =0 ; + dev_priv->disable_hotplug_in_pm = true;console_lock ();intel_fbdev_set_suspend (dev,1 );
@@ -548,6 +549,7 @@ static int i915_drm_thaw(struct drm_device *dev)intel_opregion_init (dev); + dev_priv->disable_hotplug_in_pm = false; dev_priv->modeset_on_lid =0 ;console_lock ();
drivers/gpu/drm/i915/i915_drv.h +1 -0
@@ -360,6 +360,7 @@ typedef struct drm_i915_private {u32 gt_irq_mask;u32 pch_irq_mask; +bool disable_hotplug_in_pm;u32 hotplug_supported_mask;struct work_struct hotplug_work;
drivers/gpu/drm/i915/i915_irq.c +6 -3
@@ -527,7 +527,8 @@ static irqreturn_t ivybridge_irq_handler(DRM_IRQ_ARGS)/* check event from PCH */ if (de_iir &DE_PCH_EVENT_IVB ) { -if (pch_iir &SDE_HOTPLUG_MASK_CPT ) +if (!dev_priv->disable_hotplug_in_pm && + (pch_iir &SDE_HOTPLUG_MASK_CPT ))queue_work (dev_priv->wq, &dev_priv->hotplug_work);pch_irq_handler (dev); }
@@ -627,7 +628,8 @@ static irqreturn_t ironlake_irq_handler(DRM_IRQ_ARGS)/* check event from PCH */ if (de_iir &DE_PCH_EVENT ) { -if (pch_iir & hotplug_mask) +if (!dev_priv->disable_hotplug_in_pm && + (pch_iir & hotplug_mask))queue_work (dev_priv->wq, &dev_priv->hotplug_work);pch_irq_handler (dev); }
@@ -1345,7 +1347,8 @@ static irqreturn_t i915_driver_irq_handler(DRM_IRQ_ARGS)DRM_DEBUG_DRIVER ("hotplug event received, stat 0x%08x\n" , hotplug_status); -if (hotplug_status & dev_priv->hotplug_supported_mask) +if (!dev_priv->disable_hotplug_in_pm && + (hotplug_status & dev_priv->hotplug_supported_mask))queue_work (dev_priv->wq, &dev_priv->hotplug_work);
Signature · 1 line
1.7.9.2
Quoted 3 lines · Takashi Iwai
The hotplug work can be still kicked off via irq during PM, and this may conflict with the resume procedure. For example, eDP on SNB machine shows WARNING like below during the resume:
Daniel and I were just discussing the number of work queues we have active across suspend that like to poke hardware as we either try to sleep or resume. Since we already have to quiesce the workers to disable the device, I suggest we reuse the same code for suspend. -Chris
Signature · 1 line
Chris Wilson, Intel Open Source Technology Centre
At Thu, 19 Apr 2012 17:22:47 +0100,
Quoted 10 lines · Chris Wilson
Quoted 3 lines · Takashi Iwai
The hotplug work can be still kicked off via irq during PM, and this may conflict with the resume procedure. For example, eDP on SNB machine shows WARNING like below during the resume:
Daniel and I were just discussing the number of work queues we have active across suspend that like to poke hardware as we either try to sleep or resume. Since we already have to quiesce the workers to disable the device, I suggest we reuse the same code for suspend.
Hm, sorry it's not clear to me which code you are referring to... Is it only in Daniel's next tree, or am I missing in Linus tree?
thanks,
Takashi
Quoted 27 lines · Takashi Iwai
The hotplug work can be still kicked off via irq during PM, and this may conflict with the resume procedure. For example, eDP on SNB machine shows WARNING like below during the resume:
WARNING: at /usr/src/packages/BUILD/kernel-default-3.0.13/linux-3.0/drivers/gpu/drm/i915/intel_dp.c:332 intel_dp_check_edp+0x73/0xd0 [i915]() Hardware name: HP Z1 Workstation eDP powered off while attempting aux channel communication. Supported: Yes Pid: 3210, comm: kworker/u:49 Tainted: G C N 3.0.13-0.27-default #1 Call Trace: [<ffffffff810048b5>] dump_trace+0x75/0x300 [<ffffffff8143ea0f>] dump_stack+0x69/0x6f [<ffffffff81059e2b>] warn_slowpath_common+0x7b/0xc0 [<ffffffff81059f25>] warn_slowpath_fmt+0x45/0x50 [<ffffffffa01fa9f3>] intel_dp_check_edp+0x73/0xd0 [i915] [<ffffffffa01fae4b>] intel_dp_aux_native_write+0x1b/0xe0 [i915] [<ffffffffa01fb033>] intel_dp_set_link_train+0x73/0xa0 [i915] [<ffffffffa01fb58e>] intel_dp_start_link_train+0x16e/0x400 [i915] [<ffffffffa01fbc6c>] intel_dp_complete_link_train+0x1fc/0x3d0 [i915] [<ffffffffa01fcf4c>] intel_dp_check_link_status+0x12c/0x1d0 [i915] [<ffffffffa01cf22e>] i915_hotplug_work_func+0x6e/0xa0 [i915] [<ffffffff810747bc>] process_one_work+0x16c/0x350 [<ffffffff8107734a>] worker_thread+0x17a/0x410 [<ffffffff8107b676>] kthread+0x96/0xa0 [<ffffffff8144a7c4>] kernel_thread_helper+0x4/0x10 DWARF2 unwinder stuck at kernel_thread_helper+0x4/0x10
Quoted 5 lines
This patch adds a flag to disable the hotplug during PM operation for avoiding such a race.
Cc <[email protected]>Signed-off-by Takashi Iwai <[email protected]>
I haven't looked to closely, but isn't cancelling the hotplug work after we disable the irqs in the suspend path good enough? This here feels a bit like ducttapeing over the problem.
I'm asking because we seem to have other problems with work queue items that leak across s/r and cause havoc on resume. So extracting this quiescenting code from module unload and also running it at suspend time sounds more like the right thing.
-Daniel
Quoted 84 lines
---
It's a pretty simplistic solution that just ignores the hotplug work. We may keep some pending flag and process it later, if ignoring the event matters...
drivers/gpu/drm/i915/i915_drv.c | 2 ++ drivers/gpu/drm/i915/i915_drv.h | 1 + drivers/gpu/drm/i915/i915_irq.c | 9 ++++++--- 3 files changed, 9 insertions(+), 3 deletions(-)drivers/gpu/drm/i915/i915_drv.c +2
-0@@ -471,6 +471,7 @@ static int i915_drm_freeze(struct drm_device *dev)/* Modeset on resume, not lid events */ dev_priv->modeset_on_lid =0 ; + dev_priv->disable_hotplug_in_pm = true;console_lock ();intel_fbdev_set_suspend (dev,1 );@@ -548,6 +549,7 @@ static int i915_drm_thaw(struct drm_device *dev)intel_opregion_init (dev); + dev_priv->disable_hotplug_in_pm = false; dev_priv->modeset_on_lid =0 ;console_lock ();drivers/gpu/drm/i915/i915_drv.h +1
-0@@ -360,6 +360,7 @@ typedef struct drm_i915_private {u32 gt_irq_mask;u32 pch_irq_mask; +bool disable_hotplug_in_pm;u32 hotplug_supported_mask;struct work_struct hotplug_work;drivers/gpu/drm/i915/i915_irq.c +6
-3@@ -527,7 +527,8 @@ static irqreturn_t ivybridge_irq_handler(DRM_IRQ_ARGS)/* check event from PCH */ if (de_iir &DE_PCH_EVENT_IVB ) { -if (pch_iir &SDE_HOTPLUG_MASK_CPT ) +if (!dev_priv->disable_hotplug_in_pm && + (pch_iir &SDE_HOTPLUG_MASK_CPT ))queue_work (dev_priv->wq, &dev_priv->hotplug_work);pch_irq_handler (dev); }@@ -627,7 +628,8 @@ static irqreturn_t ironlake_irq_handler(DRM_IRQ_ARGS)/* check event from PCH */ if (de_iir &DE_PCH_EVENT ) { -if (pch_iir & hotplug_mask) +if (!dev_priv->disable_hotplug_in_pm && + (pch_iir & hotplug_mask))queue_work (dev_priv->wq, &dev_priv->hotplug_work);pch_irq_handler (dev); }@@ -1345,7 +1347,8 @@ static irqreturn_t i915_driver_irq_handler(DRM_IRQ_ARGS)DRM_DEBUG_DRIVER ("hotplug event received, stat 0x%08x\n" , hotplug_status); -if (hotplug_status & dev_priv->hotplug_supported_mask) +if (!dev_priv->disable_hotplug_in_pm && + (hotplug_status & dev_priv->hotplug_supported_mask))queue_work (dev_priv->wq, &dev_priv->hotplug_work);Signature · 6 lines
1.7.9.2 _______________________________________________ Intel-gfx mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Signature · 3 lines
Daniel Vetter Mail: [email protected] Mobile: +41 (0)79 365 57 48
At Thu, 19 Apr 2012 18:29:47 +0200,
Quoted 32 lines · Daniel Vetter
Quoted 30 lines · Takashi Iwai
The hotplug work can be still kicked off via irq during PM, and this may conflict with the resume procedure. For example, eDP on SNB machine shows WARNING like below during the resume:
WARNING: at /usr/src/packages/BUILD/kernel-default-3.0.13/linux-3.0/drivers/gpu/drm/i915/intel_dp.c:332 intel_dp_check_edp+0x73/0xd0 [i915]() Hardware name: HP Z1 Workstation eDP powered off while attempting aux channel communication. Supported: Yes Pid: 3210, comm: kworker/u:49 Tainted: G C N 3.0.13-0.27-default #1 Call Trace: [<ffffffff810048b5>] dump_trace+0x75/0x300 [<ffffffff8143ea0f>] dump_stack+0x69/0x6f [<ffffffff81059e2b>] warn_slowpath_common+0x7b/0xc0 [<ffffffff81059f25>] warn_slowpath_fmt+0x45/0x50 [<ffffffffa01fa9f3>] intel_dp_check_edp+0x73/0xd0 [i915] [<ffffffffa01fae4b>] intel_dp_aux_native_write+0x1b/0xe0 [i915] [<ffffffffa01fb033>] intel_dp_set_link_train+0x73/0xa0 [i915] [<ffffffffa01fb58e>] intel_dp_start_link_train+0x16e/0x400 [i915] [<ffffffffa01fbc6c>] intel_dp_complete_link_train+0x1fc/0x3d0 [i915] [<ffffffffa01fcf4c>] intel_dp_check_link_status+0x12c/0x1d0 [i915] [<ffffffffa01cf22e>] i915_hotplug_work_func+0x6e/0xa0 [i915] [<ffffffff810747bc>] process_one_work+0x16c/0x350 [<ffffffff8107734a>] worker_thread+0x17a/0x410 [<ffffffff8107b676>] kthread+0x96/0xa0 [<ffffffff8144a7c4>] kernel_thread_helper+0x4/0x10 DWARF2 unwinder stuck at kernel_thread_helper+0x4/0x10This patch adds a flag to disable the hotplug during PM operation for avoiding such a race.
Quoted 6 lines
Quoted 2 lines
Cc <[email protected]>Signed-off-by Takashi Iwai <[email protected]>I haven't looked to closely, but isn't cancelling the hotplug work after we disable the irqs in the suspend path good enough? This here feels a bit like ducttapeing over the problem.
This doesn't look like a leftover work. Judging from the log I got, the hotplug event is kicked really from the irq handler in the resume phase.
[ 53.424757] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported [ 53.452721] [drm:intel_enable_rc6], Sandybridge: RC6 disabled [ 53.477048] firewire_core: skipped bus generations, destroying all nodes [ 53.504839] [drm:intel_opregion_setup], graphic opregion physical addr: 0x73d1c018 [ 53.504929] [drm:intel_opregion_setup], Public ACPI methods supported [ 53.504930] [drm:intel_opregion_setup], SWSCI supported [ 53.504931] [drm:intel_opregion_setup], ASLE supported [ 53.504962] [drm:init_status_page], render ring hws offset: 0x00000000 [ 53.505047] [drm:init_status_page], gen6 bsd ring hws offset: 0x00022000 [ 53.505118] [drm:init_status_page], blt ring hws offset: 0x00043000 [ 53.505185] [drm:ironlake_init_pch_refclk], has_panel 1 has_lvds 0 has_pch_edp 1 has_cpu_edp 0 has_ck505 0 [ 53.505188] [drm:ironlake_init_pch_refclk], Using SSC on panel [ 53.505611] [drm:intel_dp_mode_fixup], Display port link bw 0a lane count 4 clock 270000 [ 53.505613] [drm:drm_crtc_helper_set_mode], [CRTC:3] [ 53.505615] [drm:ironlake_edp_backlight_off], [ 53.512832] [drm:ironlake_edp_panel_off], Turn eDP power off [ 53.512836] [drm:ironlake_wait_panel_off], Wait for panel power off time [ 53.512839] [drm:ironlake_wait_panel_status], mask b000000f value 00000000 status c0000008 control abcd0000 [ 53.652153] [drm:pch_irq_handler], PCH HDCP audio interrupt [ 53.652159] [drm:i915_hotplug_work_func], running encoder hotplug functions [ 53.653780] [drm:intel_dp_check_link_status], TMDS-6: channel EQ not ok, retraining [ 53.654188] [drm:intel_dp_start_link_train], training pattern 1 signal levels 00000000 .... [ 53.680513] [drm:intel_dp_start_link_train], too many full retries, give up ... [ 53.714791] [drm:intel_dp_start_link_train], training pattern 1 signal levels 06000000 [ 53.715198] ------------[ cut here ]------------ [ 53.715230] WARNING: at /usr/src/packages/BUILD/kernel-default-3.0.13/linux-3.0/drivers/gpu/drm/i915/intel_dp.c:332 intel_dp_check_edp+0x73/0xd0 [i915]()
...
Quoted 4 lines
I'm asking because we seem to have other problems with work queue items that leak across s/r and cause havoc on resume. So extracting this quiescenting code from module unload and also running it at suspend time sounds more like the right thing.
Yes, this should be needed anyway, I think. But the new hotplug event can be still generated, as it seems, and this would conflict with the initialization beind done in the resume.
thanks,
Takashi
Quoted 37 lines · Takashi Iwai
At Thu, 19 Apr 2012 18:29:47 +0200,
Quoted 35 lines · Daniel Vetter
Quoted 32 lines · Takashi Iwai
The hotplug work can be still kicked off via irq during PM, and this may conflict with the resume procedure. For example, eDP on SNB machine shows WARNING like below during the resume:
WARNING: at /usr/src/packages/BUILD/kernel-default-3.0.13/linux-3.0/drivers/gpu/drm/i915/intel_dp.c:332 intel_dp_check_edp+0x73/0xd0 [i915]() Hardware name: HP Z1 Workstation eDP powered off while attempting aux channel communication. Supported: Yes Pid: 3210, comm: kworker/u:49 Tainted: G C N 3.0.13-0.27-default #1 Call Trace: [<ffffffff810048b5>] dump_trace+0x75/0x300 [<ffffffff8143ea0f>] dump_stack+0x69/0x6f [<ffffffff81059e2b>] warn_slowpath_common+0x7b/0xc0 [<ffffffff81059f25>] warn_slowpath_fmt+0x45/0x50 [<ffffffffa01fa9f3>] intel_dp_check_edp+0x73/0xd0 [i915] [<ffffffffa01fae4b>] intel_dp_aux_native_write+0x1b/0xe0 [i915] [<ffffffffa01fb033>] intel_dp_set_link_train+0x73/0xa0 [i915] [<ffffffffa01fb58e>] intel_dp_start_link_train+0x16e/0x400 [i915] [<ffffffffa01fbc6c>] intel_dp_complete_link_train+0x1fc/0x3d0 [i915] [<ffffffffa01fcf4c>] intel_dp_check_link_status+0x12c/0x1d0 [i915] [<ffffffffa01cf22e>] i915_hotplug_work_func+0x6e/0xa0 [i915] [<ffffffff810747bc>] process_one_work+0x16c/0x350 [<ffffffff8107734a>] worker_thread+0x17a/0x410 [<ffffffff8107b676>] kthread+0x96/0xa0 [<ffffffff8144a7c4>] kernel_thread_helper+0x4/0x10 DWARF2 unwinder stuck at kernel_thread_helper+0x4/0x10This patch adds a flag to disable the hotplug during PM operation for avoiding such a race.
Cc <[email protected]>Signed-off-by Takashi Iwai <[email protected]>
Quoted 7 lines
Quoted 3 lines
I haven't looked to closely, but isn't cancelling the hotplug work after we disable the irqs in the suspend path good enough? This here feels a bit like ducttapeing over the problem.
This doesn't look like a leftover work. Judging from the log I got, the hotplug event is kicked really from the irq handler in the resume phase.
In that case I guess we have a setup ordering issue on the resume side. If we enable irqs before everything is set up again, we will fail because the resume path doesn't grab any locks ...
Quoted 30 lines
[ 53.424757] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported [ 53.452721] [drm:intel_enable_rc6], Sandybridge: RC6 disabled [ 53.477048] firewire_core: skipped bus generations, destroying all nodes [ 53.504839] [drm:intel_opregion_setup], graphic opregion physical addr: 0x73d1c018 [ 53.504929] [drm:intel_opregion_setup], Public ACPI methods supported [ 53.504930] [drm:intel_opregion_setup], SWSCI supported [ 53.504931] [drm:intel_opregion_setup], ASLE supported [ 53.504962] [drm:init_status_page], render ring hws offset: 0x00000000 [ 53.505047] [drm:init_status_page], gen6 bsd ring hws offset: 0x00022000 [ 53.505118] [drm:init_status_page], blt ring hws offset: 0x00043000 [ 53.505185] [drm:ironlake_init_pch_refclk], has_panel 1 has_lvds 0 has_pch_edp 1 has_cpu_edp 0 has_ck505 0 [ 53.505188] [drm:ironlake_init_pch_refclk], Using SSC on panel [ 53.505611] [drm:intel_dp_mode_fixup], Display port link bw 0a lane count 4 clock 270000 [ 53.505613] [drm:drm_crtc_helper_set_mode], [CRTC:3] [ 53.505615] [drm:ironlake_edp_backlight_off], [ 53.512832] [drm:ironlake_edp_panel_off], Turn eDP power off [ 53.512836] [drm:ironlake_wait_panel_off], Wait for panel power off time [ 53.512839] [drm:ironlake_wait_panel_status], mask b000000f value 00000000 status c0000008 control abcd0000 [ 53.652153] [drm:pch_irq_handler], PCH HDCP audio interrupt [ 53.652159] [drm:i915_hotplug_work_func], running encoder hotplug functions [ 53.653780] [drm:intel_dp_check_link_status], TMDS-6: channel EQ not ok, retraining [ 53.654188] [drm:intel_dp_start_link_train], training pattern 1 signal levels 00000000 .... [ 53.680513] [drm:intel_dp_start_link_train], too many full retries, give up ... [ 53.714791] [drm:intel_dp_start_link_train], training pattern 1 signal levels 06000000 [ 53.715198] ------------[ cut here ]------------ [ 53.715230] WARNING: at /usr/src/packages/BUILD/kernel-default-3.0.13/linux-3.0/drivers/gpu/drm/i915/intel_dp.c:332 intel_dp_check_edp+0x73/0xd0 [i915]()...
Quoted 8 lines
Quoted 4 lines
I'm asking because we seem to have other problems with work queue items that leak across s/r and cause havoc on resume. So extracting this quiescenting code from module unload and also running it at suspend time sounds more like the right thing.
Yes, this should be needed anyway, I think. But the new hotplug event can be still generated, as it seems, and this would conflict with the initialization beind done in the resume.
Yeah, we have a few holes to plug in s/r ...
-Daniel
Signature · 3 lines
Daniel Vetter Mail: [email protected] Mobile: +41 (0)79 365 57 48
Quoted 5 lines · Takashi Iwai
This patch adds a flag to disable the hotplug during PM operation for avoiding such a race.
Cc <[email protected]>Signed-off-by Takashi Iwai <[email protected]>
This seems simpler (untested):
drivers/gpu/drm/i915/i915_drv.c +2 -1
@@ -530,11 +530,12 @@ static int i915_drm_thaw(struct drm_device *dev)ironlake_init_pch_refclk (dev);drm_mode_config_reset (dev); -drm_irq_install (dev);/* Resume the modeset for every activated CRTC */ drm_helper_resume_force_mode (dev); +drm_irq_install (dev); +if (IS_IRONLAKE_M (dev))ironlake_enable_rc6 (dev);
- ajax
_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
At Thu, 19 Apr 2012 13:55:04 -0400,
Quoted 10 lines · Adam Jackson
Quoted 5 lines · Takashi Iwai
This patch adds a flag to disable the hotplug during PM operation for avoiding such a race.
Cc <[email protected]>Signed-off-by Takashi Iwai <[email protected]>This seems simpler (untested):
This looks promising. I'll ask a test with your patch.
thanks,
Takashi
Quoted 19 lines
drivers/gpu/drm/i915/i915_drv.c +2
-2@@ -530,11 +530,12 @@ static int i915_drm_thaw(struct drm_device *dev)ironlake_init_pch_refclk (dev);drm_mode_config_reset (dev); -drm_irq_install (dev);/* Resume the modeset for every activated CRTC */ drm_helper_resume_force_mode (dev); +drm_irq_install (dev); +if (IS_IRONLAKE_M (dev))ironlake_enable_rc6 (dev); - ajax
At Thu, 19 Apr 2012 20:11:53 +0200,
Quoted 9 lines · Takashi Iwai
At Thu, 19 Apr 2012 13:55:04 -0400,
Quoted 6 lines · Adam Jackson
Quoted 3 lines · Takashi Iwai
This patch adds a flag to disable the hotplug during PM operation for avoiding such a race.
Quoted 6 lines
Quoted 4 lines
Quoted 2 lines
Cc <[email protected]>Signed-off-by Takashi Iwai <[email protected]>This seems simpler (untested):
This looks promising. I'll ask a test with your patch.
Tester reported a positive feedback. But he also experienced with a blank screen after a couple of S4 resumes. Now it's being checked whether it's a regression by the patch or not.
The machine has a problem with S3 anyway, also showing a blank screen after S3 resume. So, the problem is likely irrelevant from your patch, but just to be sure.
thanks,
Takashi
Quoted 31 lines
thanks,
Takashi
Quoted 9 lines
drivers/gpu/drm/i915/i915_drv.c +0
-1@@ -530,11 +530,12 @@ static int i915_drm_thaw(struct drm_device *dev)ironlake_init_pch_refclk (dev);drm_mode_config_reset (dev); -drm_irq_install (dev);drivers/gpu/drm/i915/i915_drv.c static int i915_drm_thaw(struct drm_device *dev)
Quoted 10 lines
drivers/gpu/drm/i915/i915_drv.c +2
-1/* Resume the modeset for every activated CRTC */ drm_helper_resume_force_mode (dev); +drm_irq_install (dev); +if (IS_IRONLAKE_M (dev))ironlake_enable_rc6 (dev); - ajax_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Takashi Iwai
Reviewed-byAt Wed, 25 Apr 2012 10:14:51 +0200,
Quoted 15 lines · Takashi Iwai
At Thu, 19 Apr 2012 20:11:53 +0200,
Quoted 12 lines · Takashi Iwai
At Thu, 19 Apr 2012 13:55:04 -0400,
Quoted 9 lines · Adam Jackson
Quoted 5 lines · Takashi Iwai
This patch adds a flag to disable the hotplug during PM operation for avoiding such a race.
Cc <[email protected]>Signed-off-by Takashi Iwai <[email protected]>
Quoted 7 lines
Quoted 3 lines
Quoted 1 line
This seems simpler (untested):
This looks promising. I'll ask a test with your patch.
Tester reported a positive feedback. But he also experienced with a blank screen after a couple of S4 resumes. Now it's being checked whether it's a regression by the patch or not.
It seems unrelated with the patch itself. So, from my side,
Adam, could you resubmit it with a proper sign-off so that it can be merged for 3.4 or 3.5, preferably with Cc to stable kernel?
thanks,
Takashi
Quoted 46 lines
The machine has a problem with S3 anyway, also showing a blank screen after S3 resume. So, the problem is likely irrelevant from your patch, but just to be sure.
thanks,
Takashi
Quoted 25 lines
thanks,
Takashi
Quoted 18 lines
drivers/gpu/drm/i915/i915_drv.c +2
-1@@ -530,11 +530,12 @@ static int i915_drm_thaw(struct drm_device *dev)ironlake_init_pch_refclk (dev);drm_mode_config_reset (dev); -drm_irq_install (dev);/* Resume the modeset for every activated CRTC */ drm_helper_resume_force_mode (dev); +drm_irq_install (dev); +if (IS_IRONLAKE_M (dev))ironlake_enable_rc6 (dev);Quoted 6 lines
Quoted 1 line
- ajax
_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Quoted 25 lines · Takashi Iwai
At Wed, 25 Apr 2012 10:14:51 +0200,
Quoted 15 lines · Takashi Iwai
At Thu, 19 Apr 2012 20:11:53 +0200,
Quoted 12 lines · Takashi Iwai
At Thu, 19 Apr 2012 13:55:04 -0400,
Quoted 9 lines · Adam Jackson
Quoted 5 lines · Takashi Iwai
This patch adds a flag to disable the hotplug during PM operation for avoiding such a race.
Cc <[email protected]>Signed-off-by Takashi Iwai <[email protected]>Quoted 7 lines
Quoted 3 lines
Quoted 1 line
This seems simpler (untested):
This looks promising. I'll ask a test with your patch.
Tester reported a positive feedback. But he also experienced with a blank screen after a couple of S4 resumes. Now it's being checked whether it's a regression by the patch or not.
Quoted 5 lines
It seems unrelated with the patch itself. So, from my side,
Reviewed-by Takashi Iwai <[email protected]>Adam, could you resubmit it with a proper sign-off so that it can be merged for 3.4 or 3.5, preferably with Cc to stable kernel?
Note that
daniel@phenom:~/linux/src$ git show 8b2e326dc7c5aa6952c88656d04d0d81fd85a6f8 commit 8b2e326dc7c5aa6952c88656d04d0d81fd85a6f8 Author: Chris Wilson <[email protected]> Date: Tue Apr 24 22:59:41 2012 +0100
drm/i915: Unconditionally initialise the interrupt workers
in drm-intel-next is closes a race around suspend/resume that could lead to an oops somewhere on resume.
-Daniel
Signature · 3 lines
Daniel Vetter Mail: [email protected] Mobile: +41 (0)79 365 57 48
At Thu, 10 May 2012 10:29:19 +0200,
Quoted 41 lines · Daniel Vetter
Quoted 25 lines · Takashi Iwai
At Wed, 25 Apr 2012 10:14:51 +0200,
Quoted 15 lines · Takashi Iwai
At Thu, 19 Apr 2012 20:11:53 +0200,
Quoted 12 lines · Takashi Iwai
At Thu, 19 Apr 2012 13:55:04 -0400,
Quoted 9 lines · Adam Jackson
Quoted 5 lines · Takashi Iwai
This patch adds a flag to disable the hotplug during PM operation for avoiding such a race.
Cc <[email protected]>Signed-off-by Takashi Iwai <[email protected]>Quoted 7 lines
Quoted 3 lines
Quoted 1 line
This seems simpler (untested):
This looks promising. I'll ask a test with your patch.
Tester reported a positive feedback. But he also experienced with a blank screen after a couple of S4 resumes. Now it's being checked whether it's a regression by the patch or not.
Quoted 5 lines
It seems unrelated with the patch itself. So, from my side,
Reviewed-by Takashi Iwai <[email protected]>Adam, could you resubmit it with a proper sign-off so that it can be merged for 3.4 or 3.5, preferably with Cc to stable kernel?
Note that
daniel@phenom:~/linux/src$ git show 8b2e326dc7c5aa6952c88656d04d0d81fd85a6f8 commit 8b2e326dc7c5aa6952c88656d04d0d81fd85a6f8 Author: Chris Wilson <[email protected]> Date: Tue Apr 24 22:59:41 2012 +0100
Quoted 4 lines
drm/i915: Unconditionally initialise the interrupt workers
in drm-intel-next is closes a race around suspend/resume that could lead to an oops somewhere on resume.
I don't think it's missing hotplug initializations. It's no Oops but the race between the resume procedure being processed and the hotplug work triggered during the resume procedure.
thanks,
Takashi
Quoted 43 lines · Takashi Iwai
At Thu, 10 May 2012 10:29:19 +0200,
Quoted 41 lines · Daniel Vetter
Quoted 25 lines · Takashi Iwai
At Wed, 25 Apr 2012 10:14:51 +0200,
Quoted 15 lines · Takashi Iwai
At Thu, 19 Apr 2012 20:11:53 +0200,
Quoted 12 lines · Takashi Iwai
At Thu, 19 Apr 2012 13:55:04 -0400,
Quoted 9 lines · Adam Jackson
Quoted 5 lines · Takashi Iwai
This patch adds a flag to disable the hotplug during PM operation for avoiding such a race.
Cc <[email protected]>Signed-off-by Takashi Iwai <[email protected]>Quoted 7 lines
Quoted 3 lines
Quoted 1 line
This seems simpler (untested):
This looks promising. I'll ask a test with your patch.
Tester reported a positive feedback. But he also experienced with a blank screen after a couple of S4 resumes. Now it's being checked whether it's a regression by the patch or not.
Quoted 5 lines
It seems unrelated with the patch itself. So, from my side,
Reviewed-by Takashi Iwai <[email protected]>Adam, could you resubmit it with a proper sign-off so that it can be merged for 3.4 or 3.5, preferably with Cc to stable kernel?
Note that
daniel@phenom:~/linux/src$ git show 8b2e326dc7c5aa6952c88656d04d0d81fd85a6f8 commit 8b2e326dc7c5aa6952c88656d04d0d81fd85a6f8 Author: Chris Wilson <[email protected]> Date: Tue Apr 24 22:59:41 2012 +0100
Quoted 8 lines
Quoted 4 lines
drm/i915: Unconditionally initialise the interrupt workers
in drm-intel-next is closes a race around suspend/resume that could lead to an oops somewhere on resume.
I don't think it's missing hotplug initializations. It's no Oops but the race between the resume procedure being processed and the hotplug work triggered during the resume procedure.
This patch is not just for hotplug, but for all the delayed work and timer stuff the driver does. And we _do_ have a bug report that leaking the rps work (for snb+ turbo mode) across either a s/r cycle or a gpu reset kills the driver.
-Daniel
Signature · 3 lines
Daniel Vetter Mail: [email protected] Mobile: +41 (0)79 365 57 48
At Thu, 10 May 2012 11:06:46 +0200,
Quoted 50 lines · Daniel Vetter
Quoted 48 lines · Takashi Iwai
At Thu, 10 May 2012 10:29:19 +0200,
Quoted 45 lines · Daniel Vetter
Quoted 25 lines · Takashi Iwai
At Wed, 25 Apr 2012 10:14:51 +0200,
Quoted 15 lines · Takashi Iwai
At Thu, 19 Apr 2012 20:11:53 +0200,
Quoted 12 lines · Takashi Iwai
At Thu, 19 Apr 2012 13:55:04 -0400,
Quoted 9 lines · Adam Jackson
Quoted 5 lines · Takashi Iwai
This patch adds a flag to disable the hotplug during PM operation for avoiding such a race.
Cc <[email protected]>Signed-off-by Takashi Iwai <[email protected]>Quoted 7 lines
Quoted 3 lines
Quoted 1 line
This seems simpler (untested):
This looks promising. I'll ask a test with your patch.
Tester reported a positive feedback. But he also experienced with a blank screen after a couple of S4 resumes. Now it's being checked whether it's a regression by the patch or not.
Quoted 5 lines
It seems unrelated with the patch itself. So, from my side,
Reviewed-by Takashi Iwai <[email protected]>Adam, could you resubmit it with a proper sign-off so that it can be merged for 3.4 or 3.5, preferably with Cc to stable kernel?
Note that
daniel@phenom:~/linux/src$ git show 8b2e326dc7c5aa6952c88656d04d0d81fd85a6f8 commit 8b2e326dc7c5aa6952c88656d04d0d81fd85a6f8 Author: Chris Wilson <[email protected]> Date: Tue Apr 24 22:59:41 2012 +0100drm/i915: Unconditionally initialise the interrupt workers
in drm-intel-next is closes a race around suspend/resume that could lead to an oops somewhere on resume.
Quoted 8 lines
Quoted 3 lines
I don't think it's missing hotplug initializations. It's no Oops but the race between the resume procedure being processed and the hotplug work triggered during the resume procedure.
This patch is not just for hotplug, but for all the delayed work and timer stuff the driver does. And we _do_ have a bug report that leaking the rps work (for snb+ turbo mode) across either a s/r cycle or a gpu reset kills the driver.
Yes, but my point is that Chris's patch (at least the commit above alone) won't fix the problem we faced.
Takashi
Quoted 9 lines · Takashi Iwai
At Thu, 10 May 2012 11:06:46 +0200,
Quoted 4 lines · Daniel Vetter
This patch is not just for hotplug, but for all the delayed work and timer stuff the driver does. And we _do_ have a bug report that leaking the rps work (for snb+ turbo mode) across either a s/r cycle or a gpu reset kills the driver.
Yes, but my point is that Chris's patch (at least the commit above alone) won't fix the problem we faced.
The patch I thought you two were talking about was:
http://cgit.freedesktop.org/~ickle/linux-2.6/commit/?h=fastboot&id=a5f91dcc3cb7a9dc1214d5014ea6f0338824ad8e
which is what I thought we had planned to fix the residual issue. -Chris
Signature · 1 line
Chris Wilson, Intel Open Source Technology Centre
At Thu, 10 May 2012 10:25:44 +0100,
Quoted 9 lines · Chris Wilson
Quoted 7 lines · Takashi Iwai
At Thu, 10 May 2012 11:06:46 +0200,
Quoted 4 lines · Daniel Vetter
This patch is not just for hotplug, but for all the delayed work and timer stuff the driver does. And we _do_ have a bug report that leaking the rps work (for snb+ turbo mode) across either a s/r cycle or a gpu reset kills the driver.
Quoted 6 lines
Quoted 2 lines
Yes, but my point is that Chris's patch (at least the commit above alone) won't fix the problem we faced.
The patch I thought you two were talking about was:
http://cgit.freedesktop.org/~ickle/linux-2.6/commit/?h=fastboot&id=a5f91dcc3cb7a9dc1214d5014ea6f0338824ad8e
which is what I thought we had planned to fix the residual issue.
Thanks, this explains better :)
But, as far as I checked, the hotplug event wasn't a leftover but newly triggered during the resume procedure. Thus there is still a race even with the patch [drm/i915: Cancel outstanding modeset workers before suspend].
Takashi
Quoted 18 lines · Takashi Iwai
At Thu, 10 May 2012 10:25:44 +0100,
Quoted 9 lines · Chris Wilson
Quoted 7 lines · Takashi Iwai
At Thu, 10 May 2012 11:06:46 +0200,
Quoted 4 lines · Daniel Vetter
This patch is not just for hotplug, but for all the delayed work and timer stuff the driver does. And we _do_ have a bug report that leaking the rps work (for snb+ turbo mode) across either a s/r cycle or a gpu reset kills the driver.
Quoted 6 lines
Quoted 2 lines
Yes, but my point is that Chris's patch (at least the commit above alone) won't fix the problem we faced.
The patch I thought you two were talking about was:
http://cgit.freedesktop.org/~ickle/linux-2.6/commit/?h=fastboot&id=a5f91dcc3cb7a9dc1214d5014ea6f0338824ad8e
which is what I thought we had planned to fix the residual issue.
Quoted 6 lines
Thanks, this explains better :)
But, as far as I checked, the hotplug event wasn't a leftover but newly triggered during the resume procedure. Thus there is still a race even with the patch [drm/i915: Cancel outstanding modeset workers before suspend].
Sorry for the confusion, I've thought the patch I've quoted might fix another bug around s/r, in addition to the hotplug race. -Daniel
Signature · 3 lines
Daniel Vetter Mail: [email protected] Mobile: +41 (0)79 365 57 48
Quoted 18 lines · Takashi Iwai
At Thu, 10 May 2012 10:25:44 +0100,
Quoted 9 lines · Chris Wilson
Quoted 7 lines · Takashi Iwai
At Thu, 10 May 2012 11:06:46 +0200,
Quoted 4 lines · Daniel Vetter
This patch is not just for hotplug, but for all the delayed work and timer stuff the driver does. And we _do_ have a bug report that leaking the rps work (for snb+ turbo mode) across either a s/r cycle or a gpu reset kills the driver.
Quoted 6 lines
Quoted 2 lines
Yes, but my point is that Chris's patch (at least the commit above alone) won't fix the problem we faced.
The patch I thought you two were talking about was:
http://cgit.freedesktop.org/~ickle/linux-2.6/commit/?h=fastboot&id=a5f91dcc3cb7a9dc1214d5014ea6f0338824ad8e
which is what I thought we had planned to fix the residual issue.
Quoted 6 lines
Thanks, this explains better :)
But, as far as I checked, the hotplug event wasn't a leftover but newly triggered during the resume procedure. Thus there is still a race even with the patch [drm/i915: Cancel outstanding modeset workers before suspend].
Which should be fixed with Adam's patch to only restore IRQs after doing the modeset upon resume; if I am following all the threads of this bug correctly.
-Chris
Signature · 1 line
Chris Wilson, Intel Open Source Technology Centre
Chris Wilson
Reviewed-byQuoted 17 lines · Adam Jackson
Quoted 5 lines · Takashi Iwai
This patch adds a flag to disable the hotplug during PM operation for avoiding such a race.
Cc <[email protected]>Signed-off-by Takashi Iwai <[email protected]>This seems simpler (untested):
drivers/gpu/drm/i915/i915_drv.c +0
-0@@ -530,11 +530,12 @@ static int i915_drm_thaw(struct drm_device *dev)ironlake_init_pch_refclk (dev);
drivers/gpu/drm/i915/i915_drv.c static int i915_drm_thaw(struct drm_device *dev) · line 540
Quoted 10 lines
drivers/gpu/drm/i915/i915_drv.c +2
-1drm_mode_config_reset (dev); -drm_irq_install (dev);/* Resume the modeset for every activated CRTC */ drm_helper_resume_force_mode (dev); +drm_irq_install (dev); +if (IS_IRONLAKE_M (dev))ironlake_enable_rc6 (dev);
-Chris
Signature · 1 line
Chris Wilson, Intel Open Source Technology Centre