sound update (#2) for 2.6.36
Linus,
please pull sound updates for v2.6.36 from:
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6.git for-linus
Most of patches are trivial fixes. A few of them are just to add the missing device ids. One behavior change is the sticky stream setup for HD-audio, which is good especially for digital receivers.
Thanks!
Takashi
===
Andrea Gelmini (1):
sound: oss: au1550_ac97.c removed duplicated #include
Charles Chin (1):
ALSA: hda - Adding support for new IDT 92HD87XX codecs
Clemens Ladisch (1):
ALSA: hda: document VIA models
Cliff Cai (1):
ASoC: register cache should be 1 byte aligned for 1 byte long register
David Henningsson (1):
ALSA: HDA: Use model=auto for LG R510
Eric Bénard (1):
ASoC: Fix for changed Eureka Kconfig symbol names
Jonathan Woithe (1):
ALSA: hda - Fix missing stream for second ADC on Realtek ALC260 HDA codec
Julia Lawall (1):
sound/oss: Adjust confusing if indentation
Kailang Yang (1):
ALSA: hda - Add support for Acer ZGA ALC271 (1025:047c)
Mark Brown (1):
ASoC: Fix inverted mute controls for WM8580
Sonic Zhang (1):
ASoC: add AD1980 obsolete information
Stephen Warren (1):
ALSA: hda - patch_nvhdmi.c: Add missing codec IDs, unify names
Steven Eastland (1):
ALSA: hda - New snd-hda-intel model/pin config for hp dv7-4000
Takashi Iwai (3):
ALSA: hda - Make converter setups sticky
ALSA: hda - add support for Conexant CX20584
ALSA: hda - Update model entries in HD-Audio-Models.txt
Documentation/sound/alsa/HD-Audio-Models.txt | 13 ++- sound/oss/ad1848.c | 2 +- sound/oss/au1550_ac97.c | 1 - sound/pci/hda/hda_codec.c | 150 ++++++++++++++++++++++++-- sound/pci/hda/hda_codec.h | 12 ++ sound/pci/hda/hda_intel.c | 6 +- sound/pci/hda/patch_conexant.c | 3 + sound/pci/hda/patch_nvhdmi.c | 61 +++++++---- sound/pci/hda/patch_realtek.c | 41 +++++++- sound/pci/hda/patch_sigmatel.c | 13 +++ sound/soc/blackfin/Kconfig | 7 +- sound/soc/blackfin/bf5xx-ad1980.c | 10 ++- sound/soc/codecs/ad1980.c | 10 ++- sound/soc/codecs/ad1980.h | 6 + sound/soc/codecs/wm8580.c | 6 +- sound/soc/imx/Kconfig | 4 +- sound/soc/soc-cache.c | 4 +- 17 files changed, 304 insertions(+), 45 deletions(-)
Quoted 8 lines · Takashi Iwai
please pull sound updates for v2.6.36 from:
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6.git for-linus
Most of patches are trivial fixes. A few of them are just to add the missing device ids. One behavior change is the sticky stream setup for HD-audio, which is good especially for digital receivers.
Hmm. I seem to have lost sound lately. I'm not sure the problem came in with this pull (it might have been the previous one - I don't do that much audio, so I might have missed it before too).
Any ideas?
Linus
---
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 HDA Intel 0000:00:1b.0: irq 58 for MSI/MSI-X
HDA Intel 0000:00:1b.0: setting latency timer to 64
hda_codec: ALC889: BIOS auto-probing.
ALSA device list:
#0: HDA Intel at 0xfb9f4000 irq 58
00:1b.0 Audio device: Intel Corporation Ibex Peak High Definition Audio (rev 06)
Subsystem: ASUSTeK Computer Inc. Device 840f
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 58
Region 0: Memory at fb9f4000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
00: 86 80 56 3b 06 05 10 00 06 00 03 04 08 00 00 00
10: 04 40 9f fb 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 0f 84
30: 00 00 00 00 50 00 00 00 00 00 00 00 03 01 00 00
At Thu, 12 Aug 2010 12:15:17 -0700,
Quoted 7 lines · Linus Torvalds
Quoted 5 lines · Takashi Iwai
please pull sound updates for v2.6.36 from:
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6.git for-linus
Quoted 7 lines
Quoted 3 lines
Most of patches are trivial fixes. A few of them are just to add the missing device ids. One behavior change is the sticky stream setup for HD-audio, which is good especially for digital receivers.
Hmm. I seem to have lost sound lately. I'm not sure the problem came in with this pull (it might have been the previous one - I don't do that much audio, so I might have missed it before too).
If this happens after the pull of my last request, it's possibly the commit eb541337b7a43822fce7d0c9d967ee149b2d9a96:
ALSA: hda - Make converter setups sticky
Could you try to revert it?
In anyway, please get alsa-info.sh from
http://www.alsa-project.org/alsa-info.sh
(many distros have already it), run with --no-upload option, and please give the output back.
thanks,
Takashi
Quoted 6 lines · Takashi Iwai
If this happens after the pull of my last request, it's possibly the commit
eb541337b7a43822fce7d0c9d967ee149b2d9a96:
ALSA: hda - Make converter setups stickyCould you try to revert it?
I've done some more testing. If I 'cat' something directly to /dev/audio, I do get sound. So I wonder whether it's some pulseaudio problem, and I'll double-check that it's really the kernel (and not the result of a "yum update", for example)
Linus
Quoted 5 lines · Linus Torvalds
I've done some more testing. If I 'cat' something directly to
/dev/audio, I do get sound. So I wonder whether it's some pulseaudio problem, and I'll double-check that it's really the kernel (and not the result of a "yum update", for example)
It's definitely kernel-related.
kernel v2.6.35-05791-g45d7f32 works. v2.6.35-7786-gad41a1e does not. And reverting that "Make converter setups sticky" commit doesn't make any difference.
I'll start bisecting it.
Linus
At Thu, 12 Aug 2010 12:57:20 -0700,
Quoted 9 lines · Linus Torvalds
Quoted 5 lines · Linus Torvalds
I've done some more testing. If I 'cat' something directly to
/dev/audio, I do get sound. So I wonder whether it's some pulseaudio problem, and I'll double-check that it's really the kernel (and not the result of a "yum update", for example)
Quoted 5 lines
It's definitely kernel-related.
kernel v2.6.35-05791-g45d7f32 works. v2.6.35-7786-gad41a1e does not. And reverting that "Make converter setups sticky" commit doesn't make any difference.
I see no relevant commits regarding HD-audio (at least for ALC889) between these two points except for "Make converter setups sticky". And, the fact that /dev/audio works implies that the PCM stream works basically. So, I have no idea for now. It might be outside the sound stack.
I'll try the latest tree on my machine whether I can reproduce the problem.
thanks,
Takashi