C-Media 8738 SPDIF problem
A message that is not in the archive (sent off-list or not yet received): [email protected]
A message that is not in the archive (sent off-list or not yet received): [email protected]
A message that is not in the archive (sent off-list or not yet received): [email protected]
A message that is not in the archive (sent off-list or not yet received): [email protected]
A message that is not in the archive (sent off-list or not yet received): [email protected]
A message that is not in the archive (sent off-list or not yet received): [email protected]
A message that is not in the archive (sent off-list or not yet received): [email protected]
A message that is not in the archive (sent off-list or not yet received): [email protected]
Quoted 4 lines · Takashi Iwai
Done. Now committed cvs.
please give a try.
Sorry for responding so late. Here are the results for the cmipci driver cvs version as of today:
I see no way to listen to a signal on the digital input.
In a standard setting, there is no signal on the normal analog output.
I can get analog out by:
unmute IEC958 Output
(this enables digital out, as expected)
unmute IEC958 In Monitor
(strangely enough, this routes the IEC output to the internal DAC)
When I input an spdif signal, this has no effect.
When I enable SPDIF loop, the SPDIF signal goes, but the internal DAC keeps playing with the above settings.
But both IEC958 Output and IEC958 In Monitor need to be enabled to get analog out.
But with SPDIF loop on, I see no way to get a signal in the coaxial input repeated on the output and/or DAC.
In the above setting, the PCM volume slider and mute controls have no effect.
Cheers,
Thomas
_______________________________________________
Alsa-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/alsa-devel
One more funny thing when playing a 44k mono signal, there is no output on spdif, and neither is there on the DAC.
Some soft squishing noises perhaps, but nothing more. Maybe the 44 k reported by xmms is not exact. Or maybe mono is the problem?
Cheers,
Thomas
_______________________________________________
Alsa-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/alsa-devel
PCM frames already played
Is there a way to determine the number of bytes/frames already played through the DAC since last reset via snd_pcm_status in v0.9.x ?
Its possible in OSS via ioctl and in alsa v0.5.0 you can view at a element "bytes" in sthe respective structure.
But how does it work in v0.9.x ?
rds guenther
_______________________________________________
Alsa-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/alsa-devel
RE: PCM frames already played
I do this by counting how many frames have already been written(from the app), minus the frames still waiting to be written (from alsa, i.e. How many frames are still in the sound cards buffer waiting to be output.)
Cheers
James
Quoted 19 lines
-----Original Message-----
From: [email protected] [mailto:[email protected]]On Behalf Of Guenther Sohler
Sent: 17 February 2002 10:28
To: [email protected]
Subject: [Alsa-devel] PCM frames already playedIs there a way to determine the number of bytes/frames already played through
the DAC since last reset viasnd_pcm_statusin v0.9.x ?Its possible in OSS via ioctl and in alsa v0.5.0 you can view at a element "bytes" in sthe respective structure.
But how does it work in v0.9.x ?
Quoted 6 lines
rds guenther
_______________________________________________
Alsa-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/alsa-devel
_______________________________________________
Alsa-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/alsa-devel
RE: PCM frames already played
Thank you very much. This sounds reasonably. I will try it. Until now I hoped there would be a more easy solution. But this is ok.
rds guenther
Quoted 35 lines · On 17-Feb-02 James Courtier-Dutton wrote:
I do this by counting how many frames have already been written(from the app), minus the frames still waiting to be written (from alsa, i.e. How many frames are still in the sound cards buffer waiting to be output.)
Cheers
JamesQuoted 19 lines
-----Original Message-----
From: [email protected] [mailto:[email protected]]On Behalf Of Guenther Sohler
Sent: 17 February 2002 10:28
To: [email protected]
Subject: [Alsa-devel] PCM frames already playedIs there a way to determine the number of bytes/frames already played through
the DAC since last reset viasnd_pcm_statusin v0.9.x ?Its possible in OSS via ioctl and in alsa v0.5.0 you can view at a element "bytes" in sthe respective structure.
But how does it work in v0.9.x ?
Quoted 6 lines
rds guenther
_______________________________________________
Alsa-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/alsa-devel
Quoted 4 lines
_______________________________________________
Alsa-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/alsa-devel
Guenther Sohler
NewLogic Technologies AG
Millennium Park 6
A-6890 Lustenau
Phone: +43-5577-62000-507
E-Mail: [email protected] Fax: +43-5577-62000-988
_______________________________________________
Alsa-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/alsa-devel
Receiving Sequencer Events
In reply to James Courtier-DuttonHallo List,
I want to receive midi events from my external midi keyboard.
Therefore I tried the seq decoder which comes with the alsa package. This application creates a port and when I connect the midi port to this listener ports, i can see the events coming from the keyboard.
That means, If i want to receive events, i have to create a port and connect it to the source port(external midi "port") - then receive the events with
snd_seq_input_event (not sure whether this is the correct name)
My question: is'nt it possible receiving events without creating a port.
For sure snd_seq_input_event cannot know where to get the events from, but how can i tell snd_seq_input_event ???
rds guenther
_______________________________________________
Alsa-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/alsa-devel
Re: Receiving Sequencer Events
Quoted 8 lines · Guenther Sohler
Hallo List,
I want to receive midi events from my external midi keyboard.
Therefore I tried the seq decoder which comes with the alsa package. This application creates a port and when I connect the midi port to this listener ports, i can see the events coming from the keyboard.
Quoted 6 lines
That means, If i want to receive events, i have to create a port and connect it to the source
port(external midi "port")- then receive the events with
snd_seq_input_event(not sure whether this is the correct name)My question: is'nt it possible receiving events without creating a port.
Sorry, but the MIDI router code must know a destination which is given exactly a client+port address. This is concept of the ALSA's sequencer code.
Jaroslav
-----
Jaroslav Kysela <[email protected]>
Linux Kernel Sound Maintainer
ALSA Project http://www.alsa-project.org
SuSE Linux http://www.suse.com
_______________________________________________
Alsa-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/alsa-devel
Re: Receiving Sequencer Events
Thank you very much. I'll implement it like that.
rds guenther
Quoted 22 lines · On 17-Feb-02 Jaroslav Kysela wrote:
Quoted 8 lines · Guenther Sohler
Hallo List,
I want to receive midi events from my external midi keyboard.
Therefore I tried the seq decoder which comes with the alsa package. This application creates a port and when I connect the midi port to this listener ports, i can see the events coming from the keyboard.
Quoted 7 lines
That means, If i want to receive events, i have to create a port and connect it
to the sourceport(external midi "port")- then receive the events with
snd_seq_input_event(not sure whether this is the correct name)My question: is'nt it possible receiving events without creating a port.
Sorry, but the MIDI router code must know a destination which is given exactly a client+port address. This is concept of the ALSA's sequencer code.
Quoted 8 lines
Jaroslav
-----
Jaroslav Kysela <[email protected]>
Linux Kernel Sound Maintainer
ALSA Project http://www.alsa-project.org
SuSE Linux http://www.suse.com
Guenther Sohler
NewLogic Technologies AG
Millennium Park 6
A-6890 Lustenau
Phone: +43-5577-62000-507
E-Mail: [email protected] Fax: +43-5577-62000-988
_______________________________________________
Alsa-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/alsa-devel