Memory requirements
Hello everybody, I am trying to put a Linux on a FADS860T board, and I have no idea of the quantity of memory I will need....
could anyone give me an idea of minimal and reasonable memory requirement for these kind of boards...
Thx everybody
Jeremy
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
Quoted 3 lines · In message <[email protected]> you wrote:
Hello everybody, I am trying to put a Linux on a FADS860T board, and I have no idea of the quantity of memory I will need....
This depends on your application, and which functions you need from the kernel.
Quoted 2 lines
could anyone give me an idea of minimal and reasonable memory requirement for these kind of boards...
Minimum for a running system with very small application:
1MB flash, 4 MB RAM.
Medium configuration as used in many shipping products like ISDN routers, Bluetooth Lan Access Points, etc.:
2 MB flash, 8 MB RAM
Comfortable system for development (sufficient to compile the Linux kernel native on the target):
4 MB flash, 16 MB RAM
Wolfgang Denk
--
Software Engineering: Embedded and Realtime Systems, Embedded Linux
Phone: (+49)-8142-4596-87 Fax: (+49)-8142-4596-88 Email: [email protected] Every program has at least one bug and can be shortened by at least one instruction - from which, by induction, one can deduce that every program can be reduced to one instruction which doesn't work.
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/