Skip to contentSkip to conversation

UNABLE TO BOOT WITH 2nd SCSI DRIVE

DISCUSSION Nicholas Berry 1 participant 1 message Oct 19, 2001

lore
Share & tools
lore
#0 lore raw

Well, I can see a problem. You say the IBM is ID 0.

The driver says it's ID 6. That means your new drive, as ID1, will become sda.

I think the jumper is wrong on your IBM.

Nik

Quoted 1 line
Quoted 1 line
Quoted 1 line

jimmy <[email protected]> 10/19/01 05:55AM >>>

Hello Russell,

Quoted 3 lines

You've given all the information for the case that works, but no information
about the case that doesn't work.

That is because the server is 8000 miles away from me (other side of the contient) and I am unable to obtain all the error messages except the kernel panic (last).

FYI, /dev/sda had ID:0 (old drive) and new drive had ID:1. I have tried all ID configurations but nothing worked on 2 drive system.

Quoted 5 lines

What whould be really useful is the above message
fragment for the case
where it doesn't boot, particularly which drives
it's seeing and the
order it's seeing them.

It might also be helpful to note that the following error shows for both drives before kernel panic:

"parity error detected in Data-in phase"

So, I assume the order of drives are fine. I am
clueless.

Many thanks.

Jimmy

PS: yahoo is being rejected by your mail server.

__________________________________________________
Do You Yahoo!?
Make a great connection at Yahoo! Personals.
http://personals.yahoo.com
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/