Error using GRUB patch (and LILO questions)
Hi Ilguiz
Yes, I upgraded to automake 1.5, and that solved the problem with grub. I successfully installed Grub and got the system booting. Being used to LILO, I must say that is was a bit difficult for me. The README_DiskOnChip can give more information on how to setup the DOC (going through nftl_format,etc, etc). Grub unfortunately doesn't abide to the BIOS boot order. Sometimes I want to boot using a stiffy (rescue disk), but Grub will always start first. I know that you should be able to boot from fd0 from Grub, but it is not easy (especially not for somebody that does not know grub well enough).
So, I still prefer LILO. And yes, I actually got version Lilo 22.2 to boot my DOC. Thanks Ilguiz. Here follows my lilo.conf:
boot=/dev/nftl/disc0/disc
disk=/dev/nftl/disc0/disc
bios=0x80
lba32
install=/boot/boot-text.b
map=/boot/map
backup=/dev/null
prompt
timeout=50
default=Linux
image=/boot/bzImage-2.4.17-rthal5g
label=Linux
root=/dev/nftl/disc0/disc
vga=normal
read-only
image=/boot/bzImage-2.4.17-rthal5g
label=Linux-fb
root=/dev/nftl/disc0/disc
vga=0x314
read-onlyI had to tell LILO to use the DOC as the first drive (bios=0x80);
Thanks all
Herman
Quoted 1 line
Quoted 1 line
Quoted 1 line
Ilguiz Latypov <[email protected]> 02/22/02 06:57PM >>>
Herman,
Can you try the updated automake and autoconf packages from
ftp://ftp.redhat.com/pub/redhat/linux/rawhide/i386/RedHat/RPMS
Mine are
automake-1.5-8
autoconf-2.52-6
I get only a couple of warnings with autoconf. Sorry for the configuration nuisance.
Ilguiz
P.S. Have you checked the LILO HOWTO at
http://www.ibiblio.org/pub/Linux/docs/HOWTO/mini/LILO ? After the quick
search on the web I have a suspicion that your M-Sys BIOS firmware was configured to pretend as a second hard drive.
Quoted 1 line · Herman Theron
stage1/Makefile.am:55: invalid variable `nodist_pkgdata_DATA'
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
****************************************
Herman Theron
Hermanus Magnetic Observatory
CSIR
PO Box 32
Hermanus
7200
South Africa
E-mail: [email protected]
Phone: +27 28 3121196
Fax: +27 28 3122039
Cel: +27 833 206 311
Herman,
Yes, when starting from a floppy, it is BIOS who hands the control over to the boot sector content of the floppy disk. LILO doesn't interfere with the BIOS boot order.
The DoC patch to GRUB will affect the BIOS boot order, since the code in the flash memory will gain control earlier.
It is still possible to boot off the floppy drive by using the GRUB loader (see below an untested sample of /boot/grub/menu.lst).
Ilguiz
================================================================
default=0
timeout=2
serial --speed=115200
terminal --timeout=2 serial console
title=Linux with serial console
root (dc0,0)
kernel /boot/vmlinuz root=/dev/nftla2 ro console=ttyS0,115200
title=Rescue floppy disk
root (fd0)
kernel /vmlinuz root=/dev/fd0 ro console=ttyS0,115200
title=Windows
rootnoverify (hd0,0)
makeactive
chainloader +1
================================================================
Quoted 2 lines · Herman Theron
Sometimes I want to boot using a stiffy (rescue disk), but Grub will always start first.