Skip to contentSkip to conversation

qemu-kvm doesn't work with qemu-x86_64_defconfig

DISCUSSION Matwey V. Kornilov 2 participants 3 messages Jul 28, 2021 – Jul 29, 2021

lore
Share & tools
lore
#0 lore raw

Hello,

I am trying to build master for qemu-x86_64_defconfig. When I try to boot u-boot.rom as the following everything works fine:

Quoted 1 line

qemu-system-x86_64 -nographic -bios u-boot.rom

U-Boot SPL 2021.10-rc1-00027-g22ecb12132 (Jul 28 2021 - 18:18:37 +0300) Trying to boot from SPI
Jumping to 64-bit U-Boot: Note many features are missing

U-Boot 2021.10-rc1-00027-g22ecb12132 (Jul 28 2021 - 18:18:37 +0300)

CPU:   QEMU Virtual CPU version 2.5+
DRAM:  128 MiB
Loading Environment from nowhere... OK
Incorrect expansion ROM header signature 4daa
Model: QEMU x86 (I440FX)
Net:   e1000: 52:54:00:12:34:56
       eth0: e1000#0

Hit any key to stop autoboot: 0

When I try to enable KVM as the following, the boot process hangs:

Quoted 1 line

qemu-system-x86_64 -enable-kvm -cpu host -nographic -bios u-boot.rom

U-Boot SPL 2021.10-rc1-00027-g22ecb12132 (Jul 28 2021 - 18:18:37 +0300) Trying to boot from SPI
Jumping to 64-bit U-Boot: Note many features are missing

What have I missed? Maybe KVM is just not supported?

#1 lore raw

+Simon

Quoted 27 lines · Matwey V. Kornilov

Hello,

I am trying to build master for qemu-x86_64_defconfig. When I try to boot u-boot.rom as the following everything works fine:

Quoted 1 line

qemu-system-x86_64 -nographic -bios u-boot.rom

U-Boot SPL 2021.10-rc1-00027-g22ecb12132 (Jul 28 2021 - 18:18:37 +0300) Trying to boot from SPI
Jumping to 64-bit U-Boot: Note many features are missing

U-Boot 2021.10-rc1-00027-g22ecb12132 (Jul 28 2021 - 18:18:37 +0300)

CPU:   QEMU Virtual CPU version 2.5+
DRAM:  128 MiB
Loading Environment from nowhere... OK
Incorrect expansion ROM header signature 4daa
Model: QEMU x86 (I440FX)
Net:   e1000: 52:54:00:12:34:56
       eth0: e1000#0

Hit any key to stop autoboot: 0

When I try to enable KVM as the following, the boot process hangs:

Quoted 9 lines
Quoted 1 line

qemu-system-x86_64 -enable-kvm -cpu host -nographic -bios u-boot.rom

U-Boot SPL 2021.10-rc1-00027-g22ecb12132 (Jul 28 2021 - 18:18:37 +0300) Trying to boot from SPI
Jumping to 64-bit U-Boot: Note many features are missing

What have I missed? Maybe KVM is just not supported?

Yep, at least I did not test u-boot with KVM.

Regards,
Bin

#2 lore raw

чт, 29 июл. 2021 г. в 08:22, Bin Meng <[email protected]>:

Quoted 39 lines

+Simon

Quoted 34 lines · Matwey V. Kornilov

Hello,

I am trying to build master for qemu-x86_64_defconfig. When I try to boot u-boot.rom as the following everything works fine:

Quoted 1 line

qemu-system-x86_64 -nographic -bios u-boot.rom

U-Boot SPL 2021.10-rc1-00027-g22ecb12132 (Jul 28 2021 - 18:18:37 +0300) Trying to boot from SPI
Jumping to 64-bit U-Boot: Note many features are missing

U-Boot 2021.10-rc1-00027-g22ecb12132 (Jul 28 2021 - 18:18:37 +0300)

CPU:   QEMU Virtual CPU version 2.5+
DRAM:  128 MiB
Loading Environment from nowhere... OK
Incorrect expansion ROM header signature 4daa
Model: QEMU x86 (I440FX)
Net:   e1000: 52:54:00:12:34:56
       eth0: e1000#0

Hit any key to stop autoboot: 0

When I try to enable KVM as the following, the boot process hangs:

Quoted 1 line

qemu-system-x86_64 -enable-kvm -cpu host -nographic -bios u-boot.rom

U-Boot SPL 2021.10-rc1-00027-g22ecb12132 (Jul 28 2021 - 18:18:37 +0300) Trying to boot from SPI
Jumping to 64-bit U-Boot: Note many features are missing

Quoted 4 lines
Quoted 2 lines

What have I missed? Maybe KVM is just not supported?

Yep, at least I did not test u-boot with KVM.

Thanks for confirmation. In any case, u-boot works very quickly even without KVM.

Quoted 3 lines

Regards,
Bin

Signature · 2 lines
With best regards,
Matwey V. Kornilov