u-boot ...bootup warning bad crc
Hi all,
I'm trying to boot motorola's FADS823 eval. board with U-boot 0.2.0.
I was successfully able to program the flash with U-boot configured for FADS823 but with the following problem:
As soon as i reset, the output is as follows and it hangs.....plz. help me in this regards...
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
.
U-Boot 0.2.0 (Apr 4 2003 - 16:43:01)
CPU: PPC823ZTnnA at 40 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Board: FADS with db MPC823 rev ENG or PILOT I2C: ready DRAM: (4 MB SDRAM) 8 MB FLASH: 2 MB
*** Warning - bad CRC, using default environment
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
The output was as above.....
I have no idea where to look for, although i'm looking into the U-boot code..... I'll be grateful for any help.
rgds,
Sid.