Hi,
Hi,
I am new to Linux and U-Boot. I am using the MPC8266 BSP for MPC8266ADS reference board from Metrowerks as my base point to start my project specific board BSP. I am wondering if someone can help with telling me what sets of files I would have to modify in U-Boot to input my board specific details so that the U-Boot will work on my board. Also any other pointers would be really appcreciated.
Regards,
Divyesh Patel
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.denx.de/pipermail/u-boot/attachments/20030801/0d7b1ab7/attachment.htm
Quoted 7 lines · In message <[email protected]> you wrote:
I am new to Linux and U-Boot. I am using the MPC8266 BSP for MPC8266ADS reference board from Metrowerks as my base point to start my project specific board BSP. I am wondering if someone can help with telling me what sets of files I would have to modify in U-Boot to input my board specific details so that the U-Boot will work on my board. Also any other pointers would be really appcreciated.
Please see the section "U-Boot Porting Guide" inthe README file.
Quoted 4 lines
--=_C896D014.2F4E384C
Content-Type: text/html; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit
Content-Description: HTML
Please do not send HTML messages.
Please send plain text only.
Best regards,
Wolfgang Denk
Signature · 5 lines
Software Engineering: Embedded and Realtime Systems, Embedded Linux
Phone: (+49)-8142-4596-87 Fax: (+49)-8142-4596-88 Email: wd at denx.de
"I find this a nice feature but it is not according to the documen-
tation. Or is it a BUG?" "Let's call it an accidental feature. :-)"
- Larry Wall in <[email protected]>