Skip to contentSkip to conversation

8139too vs. 8139cp

2.6.0-test10(-mm1) Andreas Happe 2 participants 3 messages Dec 3, 2003 – Dec 4, 2003

lore
Share & tools
lore
#0 lore raw

Hardware in question: HP compaq nx7000 (8139c+ network card), using ACPI

With the 8139too driver everything works smooth except a "please use 8139too for increased performance and stability" message on bootup.

At first 8139cp works fine, but the machine freezes after 1-2h without any accessable oops (I'm running X, there was nothing in the logfiles). This happened while audio or video playback (i dunno if it's related, eth0, radeon, uhci-hcd, and intel chipset use the same interrupt).

--Andreas

#1 lore raw
Quoted 9 lines · Andreas Happe

Hardware in question: HP compaq nx7000 (8139c+ network card), using ACPI

With the 8139too driver everything works smooth except a "please use 8139too for increased performance and stability" message on bootup.

At first 8139cp works fine, but the machine freezes after 1-2h without any accessable oops (I'm running X, there was nothing in the logfiles). This happened while audio or video playback (i dunno if it's related, eth0, radeon, uhci-hcd, and intel chipset use the same interrupt).

Please try -test11, it should have a fix in 8139cp for this...

Jeff

#2 lore raw
Quoted 1 line · Jeff Garzik

Please try -test11, it should have a fix in 8139cp for this...

the computer just crashed running 8139cp unter 2.6.0-test11-bk1, I switched back to the 8139too driver (this time there wasn't any video or audio running in background).

--Andreas